AMST 21014 Tungsten Heavy Alloy Sheet Plate 0.06-2.0mm Thickness WNiFe

Machinability Tungsten Heavy Alloy Sheet / Plates Thickness 0.06mm to 100mm WNiFe

Tungsten Heavy Alloys are materials with a high tungsten content and low amounts of Ni, Fe or Ni, Cu. Some tungsten alloy is added Co, Mo or Cr etc. Their densities could be as high as 16.8~18.8g/cc.

The majority of current uses for WHAs are best satisfied with the W-Ni-Fe system. such as 93W-4.9Ni-2.lFe and 95W-4Ni-lFe represent common compositions. The addition of cobalt to a W-Ni-Fe is a common approach for slight enhancement of both strength and ductility.

The presence of cobalt provides solid-solution strengthening of the binder and slightly enhanced tungsten-matrix interfacial strength. Cobalt additions of 5 to 15% of the nominal binder weight fraction arc most common.

Introduction of Tungsten Heavy Alloy Sheet:

Standard: AMS-T-21014
Density: (16.8 - 18.8) g/cm3
Main Component: W (90 - 98)% with the addition of Ni & Fe or Ni & Cu

Thickness: 0.06mm to 2.0mm

Width x Length: Max 300 x 600mm

Surface Condition: Machined, Ground

Mechanical Properties of Tungsten Heavy Alloys:

AMST 21014 class 1
90%WNiFe, 90%WNiCu
Density : 17.0
Hardness: 32HRC max
Elongation: 5 - 20%

AMST 21014 class 2
92.5%WNiFe, 92.5%WNiCu
Density : 17.5
Hardness: 33HRC max
Elongation: 5 - 15%

AMST 21014 class 3
95%WNiFe, 95%WNiCu
Density : 18.0
Hardness: 34HRC max
Elongation: 3 - 10%

AMST 21014 class 4
97.5%WNiFe, 97.5%WNiCu
Density : 18.5
Hardness: 35HRC max
Elongation: 1 - 8%

Tungsten Alloy Sheet Applications:

Protection shields for nuclear radiation.

The war industry with the ball core,the ball link.the shrapnel,the armor-piercing shell uses the ball
Balancing weights
Electroheat upsetting anvil block
Substitutional material for Uranium
Electrodes for Resistance Weldingt tungsten alloy
High voltage electrical contact

Specifications of Tungsten Heavy Alloys:

Picture show: