MTL5014 SWITCH/ PROXIMITY DETECTOR INTERFACE The MTL5014 enables two safe-area loads to be controlled by a single switch or proximity detector located in the hazardous area. The safe- area interface has two changeover relays: output 1 and output 2. The ...
MTL5014 SWITCH/ PROXIMITY DETECTOR INTERFACE The MTL5014 enables two safe-area loads to be controlled by a single switch or proximity detector located in the hazardous area. The safe- area interface has two changeover relays: output 1 and output 2. The ... more
...Switch/Proximity Detector Interface The MTLx511 enables a safe-area load to be controlled by a switch or proximity detector located in a hazardous-area Hazardous-area inputs : Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors (NAMUR) Hazardous-area inputs Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors...
...Switch/Proximity Detector Interface The MTLx511 enables a safe-area load to be controlled by a switch or proximity detector located in a hazardous-area Hazardous-area inputs : Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors (NAMUR) Hazardous-area inputs Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors... more
...Switch/Proximity Detector Interface The MTLx511 enables a safe-area load to be controlled by a switch or proximity detector located in a hazardous-area Hazardous-area inputs : Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors (NAMUR) Hazardous-area inputs Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors...
...Switch/Proximity Detector Interface The MTLx511 enables a safe-area load to be controlled by a switch or proximity detector located in a hazardous-area Hazardous-area inputs : Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors (NAMUR) Hazardous-area inputs Inputs conforming to BS EN60947–5–6:2001 standards for proximity detectors... more
...hazardous area. The Ch1/Ch2 output transistors share a common terminal and can switch +ve or -ve polarity signals. Independent output phase reversal and line fault detection are enabled via switches for each output. LFD indication is provided on the top of
...hazardous area. The Ch1/Ch2 output transistors share a common terminal and can switch +ve or -ve polarity signals. Independent output phase reversal and line fault detection are enabled via switches for each output. LFD indication is provided on the top of more
...: 2851195450 Tel: 86-18020776792(KLICK) Skype:miyazheng520(KLICK) Product Details The MTLx516/C enable two safe-area loads to be controlled by a switch or proximity detector located in a
...: 2851195450 Tel: 86-18020776792(KLICK) Skype:miyazheng520(KLICK) Product Details The MTLx516/C enable two safe-area loads to be controlled by a switch or proximity detector located in a more
Features: Easy to be connected through wire colors identification. 2 wire sensor and 3 wire sensor are suitable for this product. Standard Din Rail Type ( 35mm) 4 groups of singals inputs are available It accepts the sensor which is 0V(NPN) or 24V (PNP) ...
Features: Easy to be connected through wire colors identification. 2 wire sensor and 3 wire sensor are suitable for this product. Standard Din Rail Type ( 35mm) 4 groups of singals inputs are available It accepts the sensor which is 0V(NPN) or 24V (PNP) ... more
... or delay closing 3) Low speed set by open or close limit switch for cushioning effect 4) Multiple push button for Open, Close and Open/ Stop/ Close function 5) Simple interface with proximity card and loop detector application 6) Articulated or folding
... or delay closing 3) Low speed set by open or close limit switch for cushioning effect 4) Multiple push button for Open, Close and Open/ Stop/ Close function 5) Simple interface with proximity card and loop detector application 6) Articulated or folding more
