-
...Testing Equipment Circuit 3 Impulse Test Generator Complied Standards & Clauses This surge test generator conforms to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, circuit 3 of Table D.1, Annex G.10, etc., IEC 60950-1:2013 clause 7.4.2, reference 3 of table N.1, IEC60065:2014 clause...
...Testing Equipment Circuit 3 Impulse Test Generator Complied Standards & Clauses This surge test generator conforms to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, circuit 3 of Table D.1, Annex G.10, etc., IEC 60950-1:2013 clause 7.4.2, reference 3 of table N.1, IEC60065:2014 clause... more
Brand Name:Sinuo
Model Number:SN1104-3
Place of Origin:China
-
...Clause 5.4.2, 5.5.8, Annex D Circuit 3 of Table D.1 Surge Test Generator 10KV Product Information: This surge test generator conforms to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, circuit 3 of Table D.1, Annex G.10, etc., IEC 60950-1:2013 clause 7.4.2, reference 3 of table N.1, IEC60065:2014 clause...
...Clause 5.4.2, 5.5.8, Annex D Circuit 3 of Table D.1 Surge Test Generator 10KV Product Information: This surge test generator conforms to IEC 62368-1:2018 clause 5.4.2, 5.5.8 and Annex D, circuit 3 of Table D.1, Annex G.10, etc., IEC 60950-1:2013 clause 7.4.2, reference 3 of table N.1, IEC60065:2014 clause... more
Brand Name:Sinuo
Model Number:SN1104-3
Place of Origin:China
IEC 62368-1 Clause 5.4.2 Circuit 3 Of Table D.1 Surge Test Generator 10KV
-
...Clause 14 High Voltage Impulse Generator With Wave Shape 1,2/50 µs IEC60335-1 Clause 14 Transient overvoltages Appliances shall withstand the transient over-voltages to which they may be subjected. Compliance is checked by subjecting each clearance having a value less than those specified in Table 16 to an impulse voltage test. The impulse test...
...Clause 14 High Voltage Impulse Generator With Wave Shape 1,2/50 µs IEC60335-1 Clause 14 Transient overvoltages Appliances shall withstand the transient over-voltages to which they may be subjected. Compliance is checked by subjecting each clearance having a value less than those specified in Table 16 to an impulse voltage test. The impulse test... more
Brand Name:HongCe
Model Number:HJ0602
Place of Origin:China
IEC60335-1 Clause 14 High Voltage Impulse Generator With Wave Shape 1,2/50 µS
-
...Generator for Impulse Dielectric Withstand Test for EVCS 1. Introduction The impulse voltage generator has a no-load wave shape corresponding to the 1.2/50ms standard impulse specified in IEC 61180 clause 7.1.2.1. The output impedance of the impluse generator is 500Ω and 2Ω, and test voltage can up to 15KV. It can meet the test requirements of IEC60664-1 clause 6.2.2.1 and IEC61851-1 clause...
...Generator for Impulse Dielectric Withstand Test for EVCS 1. Introduction The impulse voltage generator has a no-load wave shape corresponding to the 1.2/50ms standard impulse specified in IEC 61180 clause 7.1.2.1. The output impedance of the impluse generator is 500Ω and 2Ω, and test voltage can up to 15KV. It can meet the test requirements of IEC60664-1 clause 6.2.2.1 and IEC61851-1 clause... more
Brand Name:Pego Electronics
Model Number:LSG-255
Place of Origin:China
1.2/50us Impulse Voltage Generator For Impulse Dielectric Withstand Test For EVCS
-
... 2 channels/phase 90° Pink Noise Generator Manual V2.6-G.docx Technical Specification •Pink noise or sine wave 1000 Hz (not at the same time) •Two output channels when testing •The channels can be phase shifted to 0° or 90° •Fine adjustments of
-
...test standard for mattress edge testing,using the pressure plate of the buttocks is used to simulate the pressure generated by the human body sitting on the edge of the mattress, and the durability of the mattress edge is tested by repeated compression for a certain number of times Technical Parameter Test load capacity 1000N Test Cycle 5000 Main time Maintain for (3+/-1)s Ref. Test Standard EN 1725 Claus
...test standard for mattress edge testing,using the pressure plate of the buttocks is used to simulate the pressure generated by the human body sitting on the edge of the mattress, and the durability of the mattress edge is tested by repeated compression for a certain number of times Technical Parameter Test load capacity 1000N Test Cycle 5000 Main time Maintain for (3+/-1)s Ref. Test Standard EN 1725 Claus more
Brand Name:SKYLINE
Model Number:SL-T70I-B
Place of Origin:China
Mattress Edge Durability Test Machine Fatigue Tester Of Bed Edge EN 1725
-
...Generator meets the requirements from the latest standard for pink noise in IEC 60065 Clause 4.2 and 4.3. It is especially developed for all types of tone frequency amplifiers, when you need 2 channels/phase 90 ° Technical Specification Pink Noise + Sine Wave 1000 Hz (not at the same time) Two output channels when testing...
...Generator meets the requirements from the latest standard for pink noise in IEC 60065 Clause 4.2 and 4.3. It is especially developed for all types of tone frequency amplifiers, when you need 2 channels/phase 90 ° Technical Specification Pink Noise + Sine Wave 1000 Hz (not at the same time) Two output channels when testing... more
Brand Name:KINGPO
Place of Origin:China
Minimum Order Quantity:1
IEC 62368-1 Annex E Pink Noise Generator
-
...Test Equipment Standard: Conforms to IEC60065:2014 clause 8.17 b), 12.1.3, IEC60950 Application: It is used in the design, research and development, and manufacturing process of automobile parts, instruments, toys, and other industries. It simulates the collision and vibration generated by the products during transportation and use, and detects the actual working conditions and structural strength of the products. Test
...Test Equipment Standard: Conforms to IEC60065:2014 clause 8.17 b), 12.1.3, IEC60950 Application: It is used in the design, research and development, and manufacturing process of automobile parts, instruments, toys, and other industries. It simulates the collision and vibration generated by the products during transportation and use, and detects the actual working conditions and structural strength of the products. Test more
Brand Name:KeRang
Place of Origin:China
Standard:IEC60065:2014
IEC 60065 Vibration Table Testing Equipment Electromagnetic Program Setting