-
...Test Probe a for Circular Saw Guard Test, diameter 12mm, length 50mm Standard: IEC 60745-2-5 : Particular requirements for circular saws, clause 19.101.2 and Figure 105 Application: This probe is applicable to verify the upper guard protection against to touch the blade. Test sample: Circular saws Test Finger Probe Feature: Apertures in the guarding...
...Test Probe a for Circular Saw Guard Test, diameter 12mm, length 50mm Standard: IEC 60745-2-5 : Particular requirements for circular saws, clause 19.101.2 and Figure 105 Application: This probe is applicable to verify the upper guard protection against to touch the blade. Test sample: Circular saws Test Finger Probe Feature: Apertures in the guarding... more
Brand Name:HongCe
Model Number:HDD8301
Place of Origin:China
-
... Saw Product information: This device conforms to the standard requirement of EN 60745-2-5:2010 clause 19,IEC60745-2-5:2003 and Annex BB. It is used to test the Durability Test and Close time Test for the lower guard. The saw is to be set for a 90°cut and
... Saw Product information: This device conforms to the standard requirement of EN 60745-2-5:2010 clause 19,IEC60745-2-5:2003 and Annex BB. It is used to test the Durability Test and Close time Test for the lower guard. The saw is to be set for a 90°cut and more
Brand Name:KINGPO
Place of Origin:China
Minimum Order Quantity:1
-
....2 and Figure 105 Application: This probe is applicable to verify the upper guard protection against to touch the blade. Test sample: Circular saws Feature: Apertures in the guarding system above the guide plate, unless otherwise specified below, shall be
....2 and Figure 105 Application: This probe is applicable to verify the upper guard protection against to touch the blade. Test sample: Circular saws Feature: Apertures in the guarding system above the guide plate, unless otherwise specified below, shall be more
Brand Name:Sinuo
Model Number:SN2210-86
Place of Origin:China
-
Circular Saw Lower Guard Test Device HDD8302 Standard: IEC 60745-2-5 : Particular requirements for circular saws, clause 19.102.3 and Annex BB, EN 60745-2-5 Application: This device is applicable to test the closing time and mechanical strength of lower guard for circular saws. Test sample: Circular saws Feature: The saw is to be set for a 90°cut and oriented in the horizontal plane. The lower guard...
Circular Saw Lower Guard Test Device HDD8302 Standard: IEC 60745-2-5 : Particular requirements for circular saws, clause 19.102.3 and Annex BB, EN 60745-2-5 Application: This device is applicable to test the closing time and mechanical strength of lower guard for circular saws. Test sample: Circular saws Feature: The saw is to be set for a 90°cut and oriented in the horizontal plane. The lower guard... more
Brand Name:KeRang
Place of Origin:China
name:Circular Saw Lower Guard Test Device
-
...Guard Durability Test and Close time Test Equipment with Circular Saw at a 90° cut Product information: This device conforms to the standard requirement of EN 60745-2-5:2010 clause 19,IEC60745-2-5:2003 and Annex BB. It is used to test the Durability Test and Close time Test for the lower guard. The saw is to be set for a 90°cut and oriented in the horizontal plane. The lower guard...
...Guard Durability Test and Close time Test Equipment with Circular Saw at a 90° cut Product information: This device conforms to the standard requirement of EN 60745-2-5:2010 clause 19,IEC60745-2-5:2003 and Annex BB. It is used to test the Durability Test and Close time Test for the lower guard. The saw is to be set for a 90°cut and oriented in the horizontal plane. The lower guard... more
Brand Name:Kingpo
Place of Origin:China
Certification:Calibration Certificate
-
...Test Equipment Integrated Test Device For Circular Saw Switch And Lower Guard Standard: IEC60745-2-5 ‘Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws’.2003 Annex BB.20.102. EN 60745-2-5: 2010 clause 17.101 and clause 19.102.3. EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301. Application: It is used to test the circular saw...
...Test Equipment Integrated Test Device For Circular Saw Switch And Lower Guard Standard: IEC60745-2-5 ‘Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws’.2003 Annex BB.20.102. EN 60745-2-5: 2010 clause 17.101 and clause 19.102.3. EN 60745-2-5: 2010 Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301. Application: It is used to test the circular saw... more
Brand Name:HJ
Model Number:HDD8304
Place of Origin:China
-
... and marble machines, without chipping, sharp and wear-resistant 3. Suitable for cutting concrete walls, red bricks, cement walls, etc. 4. Mouth guard design. Diamond cutter head. Wet and dry, sharp and wear-resistant Advantages of
... and marble machines, without chipping, sharp and wear-resistant 3. Suitable for cutting concrete walls, red bricks, cement walls, etc. 4. Mouth guard design. Diamond cutter head. Wet and dry, sharp and wear-resistant Advantages of more
Brand Name:Zhongzuan
Place of Origin:China
Certification:CE
-
...properly tightened, the forward displacement of the saw blade will be inaccurate. 2,Therefore, after installing the saw blade, turn the circular saw blade counterclockwise with the left hand to test the tightness of the rotation. 3,If the tightness is not
...properly tightened, the forward displacement of the saw blade will be inaccurate. 2,Therefore, after installing the saw blade, turn the circular saw blade counterclockwise with the left hand to test the tightness of the rotation. 3,If the tightness is not more
Brand Name:Lidexin
Model Number:LDX-026A
Place of Origin:Foshan, Guangdong, China
-
...test Probe UL 60950 UL474 UL507 UL1017 UL60065 Model TPU6: UL test probe For testing accessibility to hazardous moving parts such as access tofan blades through a fan finger guard. Complies with UL Standards. Made entirely of stainless steel, weighs 1 lb. UL test Probe...
...test Probe UL 60950 UL474 UL507 UL1017 UL60065 Model TPU6: UL test probe For testing accessibility to hazardous moving parts such as access tofan blades through a fan finger guard. Complies with UL Standards. Made entirely of stainless steel, weighs 1 lb. UL test Probe... more
Model Number:TPU6
-
...test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger and the stop face being 100 mm. Test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 50 mm, instead of the non-circular...
...test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 125 mm instead of the non-circular face, the distance between the tip of the test finger and the stop face being 100 mm. Test probe that is similar to test probe B of IEC 61032 but having a circular stop face with a diameter of 50 mm, instead of the non-circular... more
Brand Name:Julixing
Model Number:LX-2B30
Place of Origin:China
-
Metallographic Steel Cutting Blades Circular Saw Brick 32mm Resin Bonded 1.Applications: Metallographic Consumables Metallographic Saw Blade is high hard nemesis, suitable for cutting the high hardness steel (iron-based metal HV250-800). Brown red color, ...
Metallographic Steel Cutting Blades Circular Saw Brick 32mm Resin Bonded 1.Applications: Metallographic Consumables Metallographic Saw Blade is high hard nemesis, suitable for cutting the high hardness steel (iron-based metal HV250-800). Brown red color, ... more
Brand Name:BOTO
Model Number:BT00013
Place of Origin:CHINA
-
... Standard test finger with force 1 30±0.2 30±0.2 30±0.2 30±0.2 2 60±0.2 60±0.2 60±0.2 60±0.2 3 80±0.2 80±0.2 100±0.2 80±0.2 4 180±0.2 ...
... Standard test finger with force 1 30±0.2 30±0.2 30±0.2 30±0.2 2 60±0.2 60±0.2 60±0.2 60±0.2 3 80±0.2 80±0.2 100±0.2 80±0.2 4 180±0.2 ... more
Brand Name:SHC
Model Number:SC-F2B-F
Place of Origin:China
-
...Circular TCT Mental Saw Blade for Aluminum with Thick Kerf Description: Specification: 300 x 3.2 / 2.2 x 30mm x 72T Polish surface and special body design for heat dissipation. Our services 1.Trial order is available: before placing an order, you can have some samples for testing...
...Circular TCT Mental Saw Blade for Aluminum with Thick Kerf Description: Specification: 300 x 3.2 / 2.2 x 30mm x 72T Polish surface and special body design for heat dissipation. Our services 1.Trial order is available: before placing an order, you can have some samples for testing... more
Brand Name:SEB
Model Number:SEB-A201950
Place of Origin:China
-
TCT Saw Blade For Cutting Wind Energy Composites SUNPU offers high quality TCT saw blades for wood cutting. Our company introduces and uses advanced facilities including automatic welding and grinding machines, tension testing and heattreatment facilities...
TCT Saw Blade For Cutting Wind Energy Composites SUNPU offers high quality TCT saw blades for wood cutting. Our company introduces and uses advanced facilities including automatic welding and grinding machines, tension testing and heattreatment facilities... more
Brand Name:Songpu
Place of Origin:Jiangsu, China
Minimum Order Quantity:10
-
Product Description Product Parameter Company Information Certificate Workshop Exhibition Packaging & Shipping FAQ 1: Are you trading company or manufacturer?We have been the world's leading manufacturer of superabrasives, superhard composites and ...
Product Description Product Parameter Company Information Certificate Workshop Exhibition Packaging & Shipping FAQ 1: Are you trading company or manufacturer?We have been the world's leading manufacturer of superabrasives, superhard composites and ... more
Brand Name:Huanghe Whirlwind
Model Number:HHW
Place of Origin:Changge,China
-
Details Images 610mm Round Blade Log Saw Knife industrial slitting blade Slitting round blade is mainly used in slitting machine production line. With high wear resistance and dimensional precision, the cutting edge is strictly tested; Using German vacuum ...
Details Images 610mm Round Blade Log Saw Knife industrial slitting blade Slitting round blade is mainly used in slitting machine production line. With high wear resistance and dimensional precision, the cutting edge is strictly tested; Using German vacuum ... more
Brand Name:SENDA
Model Number:SD001
Place of Origin:China
-
CNC automatic pipe cutting machine applying to fender-guard furniture manufacturing -- Brief introduction The machine adopts multiple sets of gear structure. Heavy-duty cutting, synchronous pulleys convert high and low speed according to different ...
CNC automatic pipe cutting machine applying to fender-guard furniture manufacturing -- Brief introduction The machine adopts multiple sets of gear structure. Heavy-duty cutting, synchronous pulleys convert high and low speed according to different ... more
Brand Name:HUIPU
Model Number:350CNC
Place of Origin:JIANGSU, CHINA
-
I. Product Overview 406mm (16") Wet Stone Cutter, equipped with a 6600W high-frequency permanent magnet synchronous motor, provides a maximum cutting depth of 150mm and supports flat cutting function. II. Application Scope Suitable for fields such as ...
I. Product Overview 406mm (16") Wet Stone Cutter, equipped with a 6600W high-frequency permanent magnet synchronous motor, provides a maximum cutting depth of 150mm and supports flat cutting function. II. Application Scope Suitable for fields such as ... more
Brand Name:Topsky
Model Number:LT-HC16
Place of Origin:China
-
Company Introduction Zhuzhou Xinpin Carbide Co.,Ltd. is a professional manufacturer of high quality tungsten carbide for wood working industry. Our team consists of engineers with over 20 year's experience of production,technology, and research as well as ...
Company Introduction Zhuzhou Xinpin Carbide Co.,Ltd. is a professional manufacturer of high quality tungsten carbide for wood working industry. Our team consists of engineers with over 20 year's experience of production,technology, and research as well as ... more
Brand Name:XINPIN
Place of Origin:China
Certification:ISO9001
-
..., instead of the non-circular face. The probe is designed to meet the test requirements of IEC60335-1 clause 20.2, it is applied to verify the mechanical strength of enclosures, guards and simliar parts. 2. Specification Model PG-TPB-1 Jointed point size 1
..., instead of the non-circular face. The probe is designed to meet the test requirements of IEC60335-1 clause 20.2, it is applied to verify the mechanical strength of enclosures, guards and simliar parts. 2. Specification Model PG-TPB-1 Jointed point size 1 more
Brand Name:PEGO Electronics
Model Number:PG-TPB
Place of Origin:China
