Scratch Resistant Test Probe IEC 60335-1 Clause 21 Compliant with 40° Cone Angle & 0.25mm Rounded Tip
|
... engineered to evaluate the scratch resistance of electrical solid insulation surfaces. Fully compliant with IEC 60335-1 Clause 21 (and compatible with IEC 60950-1), this probe features a 40° cone-shaped pin head with a 0.25mm±0.02mm rounded tip — a...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
TZS 683/2022 Annex B Cookware Torque Resistance Test Apparatus Strength Test Equipment
|
.../2022 Annex B B-1 APPARATUS B-1.1 A calibrated torque wrench capable of applying a torque of up to 5 N.m. B-1.2 A means of attaching the cookware firmly to a rigid base throughout the test, for example, a...
Sinuo Testing Equipment Co. , Limited
|
IEC60335 Electrical Safety Testing Probe Pin For Scratch Resistance Test
|
...Testing Probe Pin For Scratch Resistance Test IEC60335-1 Clause 21 Scratched Pin For Scratch Resistance Test Of The Electrical Solid Insulation Surface Product information: The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21. Test......
Dongguan Kingpo Technology Limited
|
Stable Rubber Testing Machine , Electronic Leather Scratch Resistance Testing Equipment
|
... test of leather, lining, fabric and the similar material at room temperature. Principle Electronic leather scratch resistance testing equipment is according to test standards : test method id one side face of the sample as the inner surface and the...
Guangdong Haida Equipment Co., Ltd.
|
ASTM D3359 Scratch Tester ISO 2409 GME 60401 Composite Materials Scratch Resistance Test Machine
|
...Scratch Tester ISO 2409 GME 60401 Composite Materials Scratch Resistance Test Machine Product Description Product Introduction The fully automatic scratch tester adopts the grid scratch method, which is a common testing method in the automotive industry. It fully automates the testing process and enables scratch tests......
DONGGUAN LONROY EQUIPMENT CO LTD
|
Wire And Cable Scratch Resistance Testing Machine Contains A Device For Scraping The Insulating Surface
|
Wire and Cable Scratch Resistance Testing Machine Technical standard Applicable to the standard "JASO D611-94 low-voltage wire and cable test standard for motor vehicles", "JBT 8193 low-voltage wire and cable standard for road vehicles", "TBT 1484.1-2001 ......
SKYLINE INSTRUMENTS CO.,LTD
|
UV Resistant Scratch Resistant Testing Machine
|
#detail_decorate_root .magic-0{border-bottom-style:solid;border-bottom-color:#53647a;font-family:Roboto;font-size:24px;color:#53647a;font-style:normal;border-bottom-width:2px;padding-top:8px;padding-bottom:4px}#detail_decorate_root .magic-1{width:750px}#......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Scratch Resistant Pin Electric Safety Testing Probes IEC60335-1 clause 21
|
Scratched Pin Electric Safety Testing Probes Product information: The test pin is used to do the scratch resistant test of the electrical solid insulation surface. It conforms to the standard requirement of IEC60335-1 clause 21. Test method: make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.5N to scratch......
Guangzhou HongCe Equipment Co., Ltd.
|
Abration Resistance Test Finger Probe Hardened Steel Conforms To IEC60950 Clause 2.10.8.4
|
...°. The tip should be rounded with radius of 0.25 mm ± 0.02 mm. The hardened steel pin should work with abration reistance tester. When performing the scratch test, scratches were performed at a speed of 20 mm/s ± 5 mm/s in a...
Pego Electronics (Yi Chun) Company Limited
|
Scratch Resistant Pin Electrical Safety Test Probe of IEC 60335-1
|
...standard requirement of IEC60335-1 clause 21. Test method: Make sure the angle between the pin and the surface of the sample is 80-85°. Then use the pin which is loaded with the axial force of 10±0.5N to scratch the surface of the sample at a speed of...
HK LEE HING INDUSTRY CO., LIMITED
|