0.1°C Temperature Resolution Melt Index Tester For Plastics Quality Evaluation
|
21.6kg Melt Flow Index Tester with 0.1°C Temperature Resolution for Plastics Quality Evaluation *, *::before, *::after {box-sizing: border-box; } * {margin: 0; } html, body {height: 100%; } body {line-height: 1.5; -webkit-font-smoothing: antialiased; } img......
Beijing Jinshengxin Testing Machine Co., Ltd.
|
Anticorrosive Melt Index Tester Inner Holeф9.55±0.025mm Temperature Range 80℃～400℃
|
...ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Melt Index Tester To meet the...
Dongguan Lixian Instrument Scientific Co.,LTD
|
ISO Melt Index Tester Extrusion Plastometer Non - Woven Fabric Indexer Electronic
|
New Design Extrusion Plastometer Non-woven Melt-Blown Fabric Use Indexer Electronic Product Description Melt index Tester conform to the requirements of the standard of GB/T3682-2000. The main parameters of Melt index instrument also conform to the ......
Dongguan Liyi Environmental Technology Co., Ltd.
|
Automatic Melt Flow Index Testing Machine , High Speed Melt Index Tester
|
...gums pass through a certain temperature and load in a viscous flow state. It is suitble for melting high temperature polycarbonate, polysulfoxide, fluorine plastics, nylon and other engineering plastics. Also, it is appropriate for the polyformaldehyde,...
Guangdong Guangce Instrument Technology Co., Ltd
|
AC220V±10% 50HZ MFR Melt Flow Index Machine , Electronic Melt Flow Index Tester with One Year Warranty
|
...Melt Flow Index Machine , Electronic Melt Flow Index Tester with One Year Warranty Introduction: Melt Index Tester meets the standards GB/ T3682-2000, the main parameters of Melt Index Tester also meet the standard requirements of ISO1133-97, ASTM1238, JIS, ect.. It is used in polyethylene, polypropylene, polystyrene, ABS, polyethylene amide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate, and other plastic...
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
Electronic Melt Flow Index Tester , Automatic Plastic Testing Equipment
|
...Melt Flow Index Tester , Automatic Plastic Testing Equipment Product Description Melt Flow Index tester is used to determine melt-mass flow rate (MFR).melt-Volume flow rate (MVR) and melt density of thermoplastic resin.it is applicable not only to the higher melting temperature, such as polycarbonate, nylon, Fluoroplastics, poly oxide and other engineering plastics, and it also applies to plastic measurement of melt......
Dongguan Haida Equipment Co.,LTD
|
Plastic Material ASTM D1238 Flammability Testing Equipment / Melt Flow Index Tester Color With Touch Screen Display
|
... 2000,ASTM D1238. It's suitable to measure melt flow character of PP, PE, POM, ABS plastics and plastic productions, widely used in factories, products quality testing station, scientific and research institutes, and concerned industries. Specification:...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
LIYI Plastic Rubber Melt Flow Index Meter, MFI, Melt Flow Index Testing Equipment, Melt Flow Index Tester
|
..., polyamide, fiber resin, acrylate, POM, fluorine plastic, polycarbonate and other plastic materials, the melt flow rate (MFR) or the melt volume flow rate (MVR) to be determined. Characteristics: 1. Fast heating speed, very small overshoot. 2....
Dongguan Liyi Environmental Technology Co., Ltd.
|
AC220V±10% 40ºC-450ºC Melt Flow Index Tester Machine For Mask Melt Blown Materials Volume Testing Method(GW-108)
|
...Melt Flow Index Tester Machine For Mask Melt Blown Materials Volume Testing Method(GW-108) Product introduction: It is used to measure the temperature and load of various plastics and resins in the state of viscous flow, and the melt flow rate MFR value of the standard die every 10 minutes. It is suitable for polycarbonate, polyarylsulfone, and fluorine with a high melting temperature. Engineering plastics such as plastics...
Dongguan Guo Feng Testing Machine Co., Ltd.
|
Plastic Particle Melt Flow Index Tester With Dual Sensor Configuration
|
Melt flow Rate Meter / Plastic Melt Meter / Plastic Particle Melt Index Tester Product Description Equipment Overview 1. The heating cylinder is made of Hastelloy to avoid oxidizing and rusting at the high temperature (up to 400-500 ℃) for a long ......
Shanghai Glomro Industrial Co., Ltd.
|
Submit your “plastics quality evaluation melt index tester” inquiry in a minute :