2000mm Falling Drop Impact Hammer Test Equipment Iso Approved
|
...Hammer Impact Testing Machine Equipment features: The test machine has to prevent the secondary impact function, AC servo system, hammer speed fast, good positioning accuracy, high test efficiency, small air resistance, can automatically measure the height, drop hammer height can be set arbitrarily, hammer height automatic calibration, impact hammer weight can be assembled by weight, anti-secondary impact......
Beijing Jinshengxin Testing Machine Co., Ltd.
|
spring operated impact hammer , safety test hammer, impact hammer test
|
...hammer test spring operated impact hammer ASH10 0.14/0.2/0.35/0.5/0.7/1.0J select one energy ASH20 2J spring hammer ASH50 0.14/0.2/0.35/0.5/0.7/1.0J contain all The Adjustable spring hammer,universal spring impact hammer from Allied Testing is designed and manufactured to perform the test specified in many standards to determine compliance with requirements concerning Mechanical Strength. Adjustable spring hammer......
ALLIED TESTING (HK) CO.,LTD.
|
IK07 2J Spring Impact Hammer Test Apparatus with R25mm Hammer For Testing Luminaire
|
.... IK ratings are defined as IKXX, XX is a number from 00 to 10 which indicates the degrees of protection provided by enclosures against external mechanical impacts. The different IK rating relate to the ability of an...
Pego Electronics (Yi Chun) Company Limited
|
Multi Energy SS Spring Impact Hammer Test Apparatus
|
... hammer. Application: This spring hammer is available to test the impact resistance of the electronic and electrical products, as an indispensable test device for the safety performance detection of the electrical products. It is suitable for testing the...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
impact tester machine+impact resistance test+impact hammer test
|
...measuring the metal material resistance performance under dynamic load,in order to determine the material properties under dynamic load. It’s a necessary testing machine,not only used in the metallurgy,machine manufacture etc areas, but also used for...
jinan hardness STING EQUIPMENT CO., LTD
|
2J IEC60068-2-63 AS NZS 60335 Impact Hammer Test
|
... 1500g±10g Product details: The Spring Hammer (Impact hammer) is made according to the standards of IEC60068-2-63 AS/NZS 60335 and IEC60068-2-75. This spring hammer is available to test the impact resistance of the electronic and electrical products,...
Guangzhou Shice Equipment Co., Ltd.
|
300mm Height Impact Testing Machine Vertical Impact Hammer Test Equipment SH-9
|
...Hammer Test Apparatus SH-9 Parameters: Model SH-9 SH-9A SH-9B Release mode Electromagnet release Electromagnet release Electromagnet release Drop floor Nylon base 600mm*600mm; thickness 8mm; hardness HRR85-100. Nylon base 1000mm*1000mm; thickness 8mm; hardness HRR85-100. Hard wood board 114x114x42 mm Drop height 300mm 0-1000mm adjustable 457 mm Impact hammer......
shanghai kerang technology co ltd
|
EN62262 IK07 2J Spring Impact Hammer Test Device
|
...Impact-test Apparatus IK01 IK02 IK03 IK04 IK05 IK06 IK07 IK08 IK09 IK10 0.14 J 0.2 J 0.35 J 0.5 J 0.7 J 1 J 2 J 5 J 10 J 20 J 1.Introduction: (1) IEC60068-2-75 Spring Impact Hammer Test Apparatus is strictly designed according to IEC60068-2-75,GB/2423.55-2006.GB4706.1 and GB8898 standard. (2)After applying the impact with the hammer......
HK LEE HING INDUSTRY CO., LIMITED
|
IEC 60068-2-75 Impact Testing Machine - 1J Spring Operated Impact Hammer
|
...Impact Testing Machine - 1J Spring Operated Impact Hammer Example of spring hammer test apparatus Figure E.1 shows an example of a spring hammer test apparatus complying with Clause 5, for energies not exceeding 1 J. The mass of the body assembly is 1250 g ± 10 g. The hammer head is fixed to the hammer shaft in such a way that the distance from its tip to the plane of impact......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC 60598-1 Vertical drop Hammer Impact Test Apparatus IK07-IK10 Impact Energy Test
|
...Hammer Impact Test Apparatus IK07-IK10 Impact Energy Test Product information: Standards & Clauses: IEC60068-2-75:2014 “Environment testing for electric and electronic products Part2: Test methods -Test Eh: Hammer tests IDT” IEC60598-1:2017 “Luminaries-Part1: General requirements and tests......
Sinuo Testing Equipment Co. , Limited
|
Submit your “impact hammer test” inquiry in a minute :