IEC60884-1 Figure 11 Test Apparatus For Checking Damage To Conductors Test Machine
|
IEC60884-1 Figure 11 Test Apparatus For Checking Damage To Conductors Test Machine Product details: This testing machine is also called the test apparatus for checking damage degree of wire which confirms to many standards such as IEC60884-1 clause 12.3.10 figure......
Guangzhou HongCe Equipment Co., Ltd.
|
IEC60884-1 Figure 12 Test Apparatus for Deflection on Screwless Terminals
|
IEC60884-1 Figure 12 Test Apparatus for Deflection on Screwless Terminals 1. Introduction The test apparatus for deflection on screwless terminals is to meet the test requirements of IEC60884-1 clause 12.3.12 and figure 12 for conducting deflection test to conductor connect with screwless terminals and testing the voltage drops. The test apparatus consists by deflecting device and voltage drop meter. 2. Specification Test......
Pego Electronics (Yi Chun) Company Limited
|
IEC60884 Figure 20 Apparatus For Testing Cord Retention / Cable Retention Test Apparatus
|
IEC60884 figure 20 Apparatus For Testing Cord Retention / Cable Retention Test Apparatus Product details: The cable retention test apparatus is designed and manufactured according to the standard requirement of IEC60884 figure 20. It is aim at test cord ......
KingPo Technology Development Limited
|
IEC60884 Fig27 Fig 42 Impact Test Apparatus On Pins Provided With Insulating Sleeves
|
...apparatus as shown in figure 27. The apparatus, positioned on a pad of sponge rubber 40 mm thick, is placed together with the specimens in a freezer at a temperature of (–15 ± 2) °C, for at least 16 hours. At the end of this ......
Guangzhou Shice Equipment Co., Ltd.
|
Body Plug Pin Fixation Verifying Test Apparatus Figure 30 IEC60884 Clause 24.10
|
IEC 60884-1 Fig. 30 Apparatus to Verify the Fixation of Pins in the Body of the Plug Product information: The plug pin fixation verifying test apparatus meets the requirements of IEC 60884-1 2013 clause 24.10 and figure 30. Technical parameters: Station 1 ......
Sinuo Testing Equipment Co. , Limited
|
Electric Vehicle Multiple Portable Socket Outlets Mechanical Strength Test Apparatus
|
...Test Apparatus Complied Standards & Clauses IEC 62196-1Ed.4CDV: 2020 "Plugs, Socket - Outlets and Couplers for Industrial and Similar Applications, and For Electric Vehicles" clause 26.3, fig 19. IEC60884-1:2006 "Plugs and socket-outlets for household and similar purposes- Part1:General requirements" clause 24.9 and figure......
Sinuo Testing Equipment Co. , Limited
|
IEC60884 Figure 27 IEC Test Equipment For Low Temperature Impact
|
... information: The specimens are subjected to an impact test by means of an apparatus as shown in figure 27. The apparatus, positioned on a pad of sponge rubber 40 mm thick, is placed together with the specimens in a freezer at a temperature of (–15 ± 2)...
Dongguan Kingpo Technology Limited
|
Low Temperature Impact Test Device LTI-1 IEC60884 Use With Cryostat
|
...fit for impact test of wire while the latter one is applied for the impact test of plug, socket, switch, wire and electrical conduit. Technical parameters: This device is used with the cryostat. It should be put in the sponge-rubber pad of 40mm-......
shanghai kerang technology co ltd
|
Socket-outlets Protection Accessibility Probe Test Pin with 20N Force of IEC60884
|
... of necessary protection of against electric shock test apparatus; Gauge for checking non-accessibility of live parts, through shutters, and of live parts of socket-outlets with increased protection. Technical Parameters: Gauge: 3mm*......
HK LEE HING INDUSTRY CO., LIMITED
|
BS EN1728 5.1 Loading Point Template Consisting Two Shaped Members
|
BS EN1728 5.1 Loading Point Template 5.1 Loading point template, consisting of two shaped members (see Figure 1) fastened together by a pivot at one end. The contours of the shaped surfaces are so devised as to sink into the upholstery. For this purpose......
Dongguan Hust Tony Instruments Co.,Ltd.
|
Submit your “iec60884 1 figure 30 test apparatus” inquiry in a minute :