IEC60243-2 Electrical Strength Test Machine For Solid Insulating Materials
|
Electrical Strength Test Machine for Solid Insulating Materials Summary: The electrical dielectric strength tester is suitable for testing the breakdown strength and withstand voltage of dielectric, such as plastic, film, resin, mica, ceramic, glass, ......
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
Glow Wire Test Chamber For Electrician And Electronics Fire Hazard Testing Of Products
|
Glow Wire Test Chamber For Electrician And Electronics Fire Hazard Testing Of Products Application: The device is designed and manufactured according to the requirements of "glow-wire test method" in IEC60695-2-10: 2000, GB / T5169.10-2006, GB / T5169.13-......
Dongguan Zhongli Instrument Technology Co., Ltd.
|
Household Appliance 7 Inch Fire Hazard Needle-Flame Test Apparatus IEC 60695-11-5
|
... wire test equipment, hot wire ignition test machine and etc.. The new version PLC control 7 inch needle-flame tester is designed and manufactured according to the standard requirement of IEC60695-11-5,......
Guangzhou HongCe Equipment Co., Ltd.
|
Horizontal / Vertical Flame Electrical Testing Machine 50W 500W IEC60695-11-4 / 3
|
...Testing Machine According to IEC60695-11-4 / 3 1. Introduction Horizontal and vertical flame test apparatus is applied to simulate the fire at the early stage surround the electric and electronics appliance, and then evaluate the degree of fire hazard. It is designed according to UL94, IEC60695-11-4 and IEC60695-11-3. The fire hazard......
Pego Electronics (Yi Chun) Company Limited
|
Lab Testing Equipment Fire Hazard Evaluation / Hot Wire Ignition Test Machine Ni80/Cr20 IEC60695-2-20
|
Hot-Wire Ignition Tester Product Description This tester simulates fire hazards as specified in IEC 60695-2-20, UL 60950, IEC 60950-1999, and ASTM D3874-1997. It employs a heating wire of specific dimensions (0.5mm × 250mm) and material (Ni80/Cr20), pre-......
Hai Da Labtester
|
Glow Wire Index Test Machine by IEC60695-2-10 Glowing Filament Method
|
...Test Machine Introduction: This Glow Wire Flammability Index Test Machine is designed according to IEC60695-2-10: 2000 standard "glowing filament test method". It is applicable to electrical and electronic products, household appliances and materials fire hazard testing......
Advanced Instruments Co.,Limited
|
140kg Glow Wire Test Machine IEC 60695 2 13 Electric Products Use
|
Glow Wire Tester GW-1 Standard:IEC60695-2-10, IEC60695-2-13 and UL746A. Application:This device simulates the thermal stress test of glowing component or heat source like overload resistance or ignition source which is caused in a short time. It is ......
shanghai kerang technology co ltd
|
Flame Chamber Needle flame testing machine
|
...Test Apparatus Model: GC-ZY-A A. Product Introduction The needle flame test machine is suitable for simulating small flames generated inside the product under fault conditions in electronic and electrical products, and uses simulation technology to evaluate the fire hazard......
Guangdong Guangce Instrument Technology Co., Ltd
|
Needle Flammability Test Equipment
|
...Test Equipment Needle Flame Tester Product Introduction The test machine is designed and manufactured according to the requirements of the relevant standards IEC60695-11-5, the needle-flame tester is the special instrument used for the fire hazard test of the small flame caused by the fault conditions in the simulating technology assessment equipment. It is applicable to the measurement of the fire hazard......
Dongguan Kingpo Technology Limited
|
IEC 60695-11-5 Needle Flame Test Apparatus Fire Testing Equipment
|
...arrangement and guidance” Equipment Overview Samples and Restrictions: Lighting equipment, low-voltage apparatus, household appliance, machine tool electric appliance, electrical machine, electric tool, electronic instrument, electrotechnical instrument,...
Sinuo Testing Equipment Co. , Limited
|
Submit your “iec60243 1 fire hazard testing machine” inquiry in a minute :