100KV Electrical Strength Testing Equipment as per IEC 60243-1 Lab Test Machine
|
... such as plastic, film, resin, mica, ceramics, silica gel, glass, insulating paint, etc. in air or liquid medium, it can measure the breakdown strength and withstand voltage time under power frequency (48 ~ 62Hz) or corresponding DC voltage....
DONGGUAN DAXIAN INSTRUMENT EQUIPMENT CO.,LTD
|
IEC 62196-1 Rewireable Plugs and Vehicle Connector Mechanical Strength Testing Equipment
|
...used to test the mechanical strength of rewirable plugs and vehicle connector which is equipped with flexible cable. Test principle is that the free end of the cable and an additional rope or other flexible means, etc., attached to the flexible cable, both...
Sinuo Testing Equipment Co. , Limited
|
IEC 61558 1 IEC 60950 Mandrel Test Equipment For Insulation Material
|
IEC 61558 1 IEC 60950 Mandrel Test Equipment For Insulation Material IEC 61558-1 Mandrel Test Equipment For Insulation Material Mandrel Test Device Description: This device is used to test the Insulation anti damage strength verification for non separable thin layer materials. Confirm to IEC60950 Safety of information technology equipment, IEC60065-1 Audio, video and similar electronic apparatus-Safety requirements, IEC 61558-1. Test......
Dongguan Kingpo Technology Limited
|
IEC 60884 Mechanical Tensile Strength Test Equipment For Covers Or Cover - Plates With Gauge 0 - 200N
|
...Figure 19, etc. Test Scope: Mainly used for checking the forces necessary to retain or remove covers, cover-plates or parts of them. Parameters: 1.Driver forcing method:Manual 2. the test fixture: clamping range of 100mm; 3. Sheet of hard material: (1 ± 0...
Guangzhou HongCe Equipment Co., Ltd.
|
Mandrel Test IEC 60950 Cable Testing Equipment
|
...Test Audio Video Apparatus Insulation Material IEC 60950 Description: This device is used to test the Insulation anti damage strength verification for non separable thin layer materials. Technical parameters: Test object non-separable thin sheets of audio video apparatus Reference standard IEC 60950-1, IEC 61558-1 Test mandrel test Station 1 Weights 50N * 3pc Test mandrel Triangle bar with a tip Rotate angle 230° Test......
Guangzhou Shice Equipment Co., Ltd.
|
IEC 61851 EVSE Testing Equipment Electric Vehicle Charging Pole IPXXB Test Probe
|
...Test Probe EVSE Testing Equipment Equipment Overview This is a precision test finger made in accordance the requirements of IEC 61032 test probe, required by many standard such as IEC 61851-1 clause 8 and 12.4, IEC 60529 IP2, etc. This probe is intended to verify the basic protection against access to hazardous parts. It is also used to verify the protection against access with a finger. This test......
Sinuo Testing Equipment Co. , Limited
|
IEC 60529 IP Testing Equipment , IPX1 IPX2 Movable Rain Drip Box Ingress Protection Test Equipment
|
... is designed and manufactured according to IEC 60529 Degrees of protection provided by enclosures (IP Code), this equipment is widely used in lamps, electric and electronic products certification testing of IPX1,IPX2. This device has been widely adopted by...
KingPo Technology Development Limited
|
Fire Resistance Test Furnace IEC 60331 , Impact Test Equipment For Wire / Cable
|
IEC 60331 Wire and Cable Fire-resistance Impact Testing Equipment Descriptions: Wire and Cable Fire-resistance Impact Tester is used to detect the fire resistance of cable wiring or power grid, burning in not less than 830 degrees, the flame, and exerts certain impact vibration, cable integrity test circuit. Standards: IEC 60331 Testing of wire and cable - circuit integrity under flame conditions IEC......
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
500kgf Load Microcomputer Control Tensile Strength Test Equipment
|
... 1. Leather Material Tensile/ Flexing/Tearing Strength Testing Equipment/Machine Usage: Tensile test, flexing test, tearing test and so on. Standards: Most internation standards including ISO, ASTM and so on. Application: Leather fabric Materials 2....
Dongguan Gaoxin Testing Equipment Co., Ltd.，
|
IEC61010-1 Clause 7.5.2 Electrical Safety Testing Grip Strength Testing Equipment
|
... clause 8.8, GB9706.1-2007 clause 21, IEC60601-1:2020 clause 9.4.4, GB9706.1-2007 clause 21 and IEC61010-1 clause 7.5.2. It’s applied to test the strength of handle or grip for lifting or carrying the equipment. 2. Standard IEC62368-1:2018 Audio/video,...
Pego Electronics (Yi Chun) Company Limited
|
Submit your “iec 60243 strength testing equipment” inquiry in a minute :