IEC60065 Figure 11 Reliability Testing Equipment , Waterproof Testing Machine
![]() |
...-outlets shall not impose undue strain on these socket-outlets. Compliance is checked by engaging the device, as during intended use, with the socket-outlet of a test apparatus as shown in figure 11. The balancing arm of the test apparatus pivots about a...
Dongguan Kingpo Technology Limited
|
IEC60065 Figure 11 IEC Test Equipment Socket Outlet Torque Test Apparatus
![]() |
IEC60065 Figure 11 IEC Test Equipment Socket outlet Torque Test Apparatus Product information: This equipment is according to the requirement standard of IEC60065 Figure 11 and IEC60950.1 clause 4.3.6 to manufacture. A device provided with pins intended......
Guangzhou HongCe Equipment Co., Ltd.
|
Test Probe B , IEC61032-Figure 2 , IEC test equipment
![]() |
Test Probe B , IEC61032-Figure 2 , IEC test equipment IEC61032 Figure 2, Diameter: 12mm Length:80mm Insulated portion: Ø50mm, 20mm wide,100mm long IEC61032 Equipment list No. Items Description Photo 1 IEC61032 Test Probe A IEC61032 Figure 1 1. Ball Diameter: 50mm 2. Baffle Plate Diameter: 45mm 3. Baffle Plate Thickness:4mm 4. Handle Diameter: 10mm 5.Handle Length :100mm 2 IEC61032 Test Probe B IEC61032 Figure......
KingPo Technology Development Limited
|
Reliable Testing Equipment Enviromental Test Systems For Environment Simulation Testing
![]() |
Reliable Testing Equipment Enviromental Test System For Environment Simulation Testing Description We are always focused on the latest development of reliable testing technologies, and also value the importance of upgrading the technologies of the equipment. Requirement for “Environment Simulation” also helps the clients to realize the importance of vibration platform and test......
Labtone Test Equipment Co., Ltd
|
IEC 61009-1 Circuit Breaker Mechanical And Electrical Life Tester
![]() |
...: The test equipment conforms to the standard requirements of IEC 61009-1:2012, IEC 60898-1:2015 clause 9.11, etc. It can carry out mechanical and electrical life test on the circuit breaker, and the supporting load cabinet can realize the on-load test on ......
Sinuo Testing Equipment Co. , Limited
|
UL2251 Water Spray Test Equipment EV Connector Testing Equipment
![]() |
... figure 38.1 and 38.2 UL2251-2022 Clause 57 and Figures 57.1 and 57.2 ANSI Z21.10.3-2004 ANSI Z21.58 Figure 10/Figure 11 CSA4.3-2004 UL1598, UL153, UL154B, UL1703, UL8750, UL1741, UL514B, UL1278, UL1571, etc. Equipment Overview Place: The location should...
Sinuo Testing Equipment Co. , Limited
|
Watertight Environment Test Equipment 0-0.2 Mpa Range For Luminaire
![]() |
...Test Equipment 45 Degrees Purling Device for luminaire Introduction Strictly designed according to UL60507-ENGL1999 figure 38.1 and 38.2, ANSIZ21.10.3, ANSIZ21.58 figure 10 and figure 11, CSA4.3-2004. The device meets the requirements of UL1598, UL153, UL1703, UL154B, UL1741, UL514B, UL1278 and UL1571, it is applied to do the test......
Pego Electronics (Yi Chun) Company Limited
|
Portable Waterproof Toys Testing Equipment For Children Safety EN-71-1 Figure 21
![]() |
... 1500.48,49. This product include two probes A and B, use to test whether there is possibility that one part of the object can be touched by the children. Probe A: for the children under 3 years old. Probe B: for the children over 3 years old. Parameters:...
DONGGUAN YUYANG INSTRUMENT CO., LTD
|
Toys Testing Equipment Thrust Test Straight Finger / Test probe 11 Of IEC 61032
![]() |
...Test Finger Rigid Test Finger Test Probe Uses Protection test straight finger 50N thrust test finger Used to test the body to prevent touching parts, can also be used to check the hole of the outer casing or the inner baffle of the outer casing Mechanical strength. Compliance with standards In accordance with IEC61032 Figure 7 test tool 11......
SKYLINE INSTRUMENTS CO.,LTD
|
AS/NZS3112 Figure 2.8 Pin Bending Test Equipment
![]() |
AS/NZS3112-Figure 2.8 Application of force for pin bending test AS/NZS3112-Figure 2.1 (in part) dimensions of plugs AS/NZS3112-Figure 2.2 Apparatus for flexing test AS/NZS3112-Figure 2.3 Form of pin AS/NZS3112-Figure 2.4 Dimensions of insulaton on ......
Guangzhou Shice Equipment Co., Ltd.
|