Resistance Constantan Wire CuNi40 / CuNi 44 Nickel Copper Round / Flat Wire
|
Resistance Constantan Wire CuNi40 /CuNi 44 Nickel copper flat wire Copper nickel alloy,which has low electric resistance,good heat-resistant and corrosion-resistant, easy to be processed and lead welded.It is used to make the key components in the thermal ......
Shanghai Tankii Alloy Material Co.,Ltd
|
5mm CuNi Alloy
|
CuNi Alloy Series CuNi44 Copper Nickel CuNi alloy resistance heating Ribbon Copper nickel alloy (CuNi Alloy) has low electric resisitance, good heat-resistant and corrosion-resistant, easy to be processed and lead welded. It is used to make the key ......
Changzhou DLX Alloy Co., Ltd.
|
CuNi19 NC025 Corrosion Resistant CuNi Alloy For Marine And Chemical Processing Uses
|
CuNi19 NC025 Corrosion Resistant CuNi Alloy for Marine and Chemical Processing Uses CuNi19 NC025 Wire is a copper-nickium (CuNi) alloy wire, where the alloy typically consists of 19% nickel (Ni) and 81% copper (Cu). This alloy is also commonly referred to ......
Jiangyin Chengxin Alloy Material Co., Ltd ，
|
Heating Resistivity CuNi Alloy For Industrial Applications
|
...CuNi Alloy ranges from 80-120 HV, which makes it ideal for applications that require high strength and durability. This Copper Based Alloy is available in both hard and soft conditions, which allows it to be used in a wide range of applications. The hardness can be adjusted based on the specific needs of the application. Another important attribute of CuNi Alloy is its high purity. It is a Copper Bronze Alloy...
Changzhou Victory Technology Co., Ltd
|
Electrical Heating Flat Wire CuNi44 CuNi Alloy Ribbon 420 Degree 0.1*3mm
|
... resistivity and very low temperature coefficient of resistance (TCR). Changzhou DLX alloy offer CuNi44 flat wire. CuNi44 flat wire was founded used in wire-wound precision resistors that can operate up to 400°C (750°F). This alloy is also capable of...
Huona (Shanghai) New Material Co., Ltd.
|
Seamless C70600 C71500 CuNi Alloy Tube / Pipe BIS / API / PED ASTM B111
|
...: DN Grade: C44300 Thickness: 0.5 Length: 6000 Cu (Min): 30 Alloy Or Not: Is Alloy Ultimate Strength (≥ MPa): 350 Elongation (≥ %): 120 Wall Thickness: 0.5-3mm Outside Diameter: 6-101.6mm Model Number: ......
TOBO STEEL GROUP CHINA
|
SINO ERLI Solid Copper Nickel Wire Bare Cuni Alloy Spool
|
...Ni, both cut to straight lengths or in coils. Our standard metal and alloy sizes range from 0.13 mm to 2 mm diameter in with strict tolerances and alpha values (conductive resistance) for uses such as gas detection and ......
TOBO INDUSTRIAL (SHANGHAI) CO., LTD
|
Extension T Type Thermocouple Bare Wire Constantan CuNi Alloy
|
T Type Thermocouple Bare Wire Constantan TNX CuNi Alloy For Thermocouple Extension Compensation Cable Wire TYPE T (Copper vs Constantan) is used or service in oxidizing, inert or reducing atmospheres or in ......
Ohmalloy Material Co.,Ltd
|
ASME SB111 UNS C71500 O61 CuNi 70/30 2.0882 Copper Nickel Alloy Seamless Tube
|
.... The higher nickel content than copper-nickel 90/10 has enhanced mechanical properties and still maintains excellent corrosion resistance. CuNi 70/30 Copper Nickel Alloy Seamless Tubes are widely used in...
Yuhong Group Co.,Ltd
|
Alloy Steel Pipe Fittings 90 EL, BW TO B16.9, EEMUA 146 SEC.1 2" WT=2.5 mm Cuni 9010
|
...) Wall thickness 2.0-19.0mm Manufacturing process Push, Press, Forge, Cast, etc. Material Carbon steel, stainless steel, alloy steel, duplex stainless, nickel alloy steel Carbon steel ASTM A234 WPB, WPC;...
TOBO STEEL GROUP CHINA
|
Submit your “cuni40 cuni alloy” inquiry in a minute :