CuNi Alloy Wire NC003 CuNi1 For Industrial Applications
|
...Alloy is its excellent resistance to corrosion and oxidation. This makes it ideal for use in marine environments or in applications where exposure to saltwater or other corrosive materials is a concern. Additionally, the CuNi Alloy has a high resistance to biofouling, which makes it an excellent choice for use in seawater cooling systems. Another important attribute of the CuNi...
Changzhou DLX Alloy Co., Ltd.
|
CuNi2/CuNi6/CuNi8/CuNi10 Copper Nickel CuNi Alloy Electric Heating Wire With Low Resistance
|
...to 600°C (1,110°F). With low temperature coefficients of electrical resistance, resistance, and thus performance, is consistent regardless of temperature. Copper Nickel alloys mechanically boast good ductility, are easily soldered and welded, as well as...
Changzhou Victory Technology Co., Ltd
|
CuNi19 NC025 Corrosion Resistant CuNi Alloy For Marine And Chemical Processing Uses
|
CuNi19 NC025 Corrosion Resistant CuNi Alloy for Marine and Chemical Processing Uses CuNi19 NC025 Wire is a copper-nickium (CuNi) alloy wire, where the alloy typically consists of 19% nickel (Ni) and 81% copper (Cu). This alloy is also commonly referred to ......
Jiangyin Chengxin Alloy Material Co., Ltd ，
|
Cupronickel CuNi1 Copper Alloy Wire Cu92Ni8 NC003 Beryllium Copper Alloy
|
... at temperatures up to 200°C. OhmAlloy 3 is kind of low resistance (heating) alloy.It is one of the key materials of the low-voltage electrical products. It is widely used in low-voltage circuit breaker, electric blankets.thermal ......
Ohmalloy Material Co.,Ltd
|
Electrical Heating Flat Wire CuNi44 CuNi Alloy Ribbon 420 Degree 0.1*3mm
|
... resistivity and very low temperature coefficient of resistance (TCR). Changzhou DLX alloy offer CuNi44 flat wire. CuNi44 flat wire was founded used in wire-wound precision resistors that can operate up to 400°C (750°F). This alloy is also capable of...
Huona (Shanghai) New Material Co., Ltd.
|
CuNi23 CuNi Alloy Good Corrosion Resistance Flat Annealed Ribbon/ Strip
|
... alloy is suitable for use at temperatures up to 400°C (750°F). It is very malleable and has a good resistance to corrosion until temperatures of 400°C. Ideal applications areas are all types of ......
Shanghai Tankii Alloy Material Co.,Ltd
|
Seamless C70600 C71500 CuNi Alloy Tube / Pipe BIS / API / PED ASTM B111
|
...: DN Grade: C44300 Thickness: 0.5 Length: 6000 Cu (Min): 30 Alloy Or Not: Is Alloy Ultimate Strength (≥ MPa): 350 Elongation (≥ %): 120 Wall Thickness: 0.5-3mm Outside Diameter: 6-101.6mm Model Number: ......
TOBO STEEL GROUP CHINA
|
SINO ERLI Solid Copper Nickel Wire Bare Cuni Alloy Spool
|
...Ni, both cut to straight lengths or in coils. Our standard metal and alloy sizes range from 0.13 mm to 2 mm diameter in with strict tolerances and alpha values (conductive resistance) for uses such as gas detection and ......
TOBO INDUSTRIAL (SHANGHAI) CO., LTD
|
ASME SB111 UNS C71500 O61 CuNi 70/30 2.0882 Copper Nickel Alloy Seamless Tube
|
.... The higher nickel content than copper-nickel 90/10 has enhanced mechanical properties and still maintains excellent corrosion resistance. CuNi 70/30 Copper Nickel Alloy Seamless Tubes are widely used in...
Yuhong Group Co.,Ltd
|
Alloy Steel Pipe Fittings 90 EL, BW TO B16.9, EEMUA 146 SEC.1 2" WT=2.5 mm Cuni 9010
|
...) Wall thickness 2.0-19.0mm Manufacturing process Push, Press, Forge, Cast, etc. Material Carbon steel, stainless steel, alloy steel, duplex stainless, nickel alloy steel Carbon steel ASTM A234 WPB, WPC;...
TOBO STEEL GROUP CHINA
|
Submit your “cuni1 cuni alloy” inquiry in a minute :