6J12 CuNi Alloy
|
... against copper. Additionally, manganin exhibits excellent performance of electrical resistance over long periods of time. There are several types of manganin available, including 6J13,...
Changzhou Victory Technology Co., Ltd
|
5mm CuNi Alloy
|
CuNi Alloy Series CuNi44 Copper Nickel CuNi alloy resistance heating Ribbon Copper nickel alloy (CuNi Alloy) has low electric resisitance, good heat-resistant and corrosion-resistant, easy to be processed and lead welded. It is used to make the key ......
Changzhou DLX Alloy Co., Ltd.
|
CuNi19 NC025 Corrosion Resistant CuNi Alloy For Marine And Chemical Processing Uses
|
CuNi19 NC025 Corrosion Resistant CuNi Alloy for Marine and Chemical Processing Uses CuNi19 NC025 Wire is a copper-nickium (CuNi) alloy wire, where the alloy typically consists of 19% nickel (Ni) and 81% copper (Cu). This alloy is also commonly referred to ......
Jiangyin Chengxin Alloy Material Co., Ltd ，
|
Electrical Heating Flat Wire CuNi44 CuNi Alloy Ribbon 420 Degree 0.1*3mm
|
... resistivity and very low temperature coefficient of resistance (TCR). Changzhou DLX alloy offer CuNi44 flat wire. CuNi44 flat wire was founded used in wire-wound precision resistors that can operate up to 400°C (750°F). This alloy is also capable of...
Huona (Shanghai) New Material Co., Ltd.
|
CuNi23 CuNi Alloy Good Corrosion Resistance Flat Annealed Ribbon/ Strip
|
... alloy is suitable for use at temperatures up to 400°C (750°F). It is very malleable and has a good resistance to corrosion until temperatures of 400°C. Ideal applications areas are all types of ......
Shanghai Tankii Alloy Material Co.,Ltd
|
Seamless C70600 C71500 CuNi Alloy Tube / Pipe BIS / API / PED ASTM B111
|
...: DN Grade: C44300 Thickness: 0.5 Length: 6000 Cu (Min): 30 Alloy Or Not: Is Alloy Ultimate Strength (≥ MPa): 350 Elongation (≥ %): 120 Wall Thickness: 0.5-3mm Outside Diameter: 6-101.6mm Model Number: ......
TOBO STEEL GROUP CHINA
|
SINO ERLI Solid Copper Nickel Wire Bare Cuni Alloy Spool
|
...Ni, both cut to straight lengths or in coils. Our standard metal and alloy sizes range from 0.13 mm to 2 mm diameter in with strict tolerances and alpha values (conductive resistance) for uses such as gas detection and ......
TOBO INDUSTRIAL (SHANGHAI) CO., LTD
|
Extension T Type Thermocouple Bare Wire Constantan CuNi Alloy
|
T Type Thermocouple Bare Wire Constantan TNX CuNi Alloy For Thermocouple Extension Compensation Cable Wire TYPE T (Copper vs Constantan) is used or service in oxidizing, inert or reducing atmospheres or in ......
Ohmalloy Material Co.,Ltd
|
ASME SB111 UNS C71500 O61 CuNi 70/30 2.0882 Copper Nickel Alloy Seamless Tube
|
.... The higher nickel content than copper-nickel 90/10 has enhanced mechanical properties and still maintains excellent corrosion resistance. CuNi 70/30 Copper Nickel Alloy Seamless Tubes are widely used in...
Yuhong Group Co.,Ltd
|
Alloy Steel Pipe Fittings 90 EL, BW TO B16.9, EEMUA 146 SEC.1 2" WT=2.5 mm Cuni 9010
|
...) Wall thickness 2.0-19.0mm Manufacturing process Push, Press, Forge, Cast, etc. Material Carbon steel, stainless steel, alloy steel, duplex stainless, nickel alloy steel Carbon steel ASTM A234 WPB, WPC;...
TOBO STEEL GROUP CHINA
|