IEC60884 Figure 14 100N IEC Test Equipment , Non Solid Pins Testing Device
![]() |
...ch is made after the test of clause 21. A force of 100 N is exerted on the pin, which is supported as shown in IEC60884-1, figure 14, for 1 min in a direction perpendicular to the axis of the pin, by means of a steel rod having a diameter of 4,8 mm, the...
Guangzhou Shice Equipment Co., Ltd.
|
IEC 60884-1 Figure 14 Non - Solid Pins Test Device For Mechanical Strength Test Of Pins Of Portable Accessories
![]() |
...ch are not solid, by the following test which is made after the test of clause 21. A force of 100 N is exerted on the pin, which is supported as shown in IEC60884-1, figure 14, for 1 min in a direction perpendicular to the axis of the pin, by means of a...
KingPo Technology Development Limited
|
100N Plug Socket Test Equipment For Non - Solid Pins Test
![]() |
...Test Equipment Device for Testing Non-solid Pins for IEC60884-1 Figure 14 With 100N Weight Standard: IEC 60884-1 ‘Plugs and socket-outlets for household and similar purposes –Part 1: General requirements’ clause 14.2, figure 14 Application: Pins of portable accessories shall have adequate mechanical strength. This device is use to test the mechanical strength of Pins of portable accessories. Plug Socket Test Equipment Test sample: Non...
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
Plug Socket - Outlet 100N Test Device For Testing Non - Solid Pins IEC 60884-1 Figure 14
![]() |
... not solid whether can withstand the sufficient hardness. Technical parameters: No.: Specifications Load weight 100N Steel rod Φ4.8mm Time for force application 1 minute Equipment material Stainless steel Test process: 1. When using the instrument for the...
Sinuo Testing Equipment Co. , Limited
|
IEC 60884-1 Figure 14 Device for Testing Non-Solid Pins to Verify the Mechanical Strength
![]() |
... to check the mechanical strength of non-solid pins of plugs and portable socket-outlets. A force of 100N is exerted on the pin which is supported as shown in IEC60884-1 figure 14, for 1min in a direction perpendicular to the axis of the pin, by mean of a...
Pego Electronics (Yi Chun) Company Limited
|
Device for testing non-solid pins NP-1
![]() |
...: The appliance is checked by the test of clause 24 and, for pins which are not solid, by the following test which is made after the test of clause 21. A force of 100 N is exerted on the pin, which is supported as shown in IEC60884-1, figure 14, for 1...
shanghai kerang technology co ltd
|
IEC 60884-1 Figure 14 100 N Plug Socket Tester Device For Testing Non - Solid Pins
![]() |
... made after the test of clause 21. A force of 100 N is exerted on the pin, which is supported as shown in IEC60884-1, figure 14, for 1 min in a direction perpendicular to the axis of the pin, by means of a steel rod having a diameter of 4,8 mm, the axis of...
Guangzhou HongCe Equipment Co., Ltd.
|
Electrical Pin Slip Ring 1000M ohm 500 VDC Non Mercury Slip Ring Manufacturer
![]() |
Electrical Pin Slip Ring With a Insulation Resistance of 1000 MΩ @ 500 VDC for Testing Device Description This series of compact slip ring is 4 poles models and adopts gold contact. The most important parameter lies in low friction coatings. It replaces ......
JINPAT Electronics Co., Ltd
|
JESD22-A101 Pct Pressure Accelerate Environmental Aging Test Chamber For IC Package
![]() |
...hermetic packaged solid-state devices in humid environments. Our PCT Pressure Accelerate Environmental Aging Test Chamber can full meet JESD22-A101,JESD22-A102-E, JESD22-A102-C standards Pressure Aging Testing Equipment is widely applied for the testing of...
ASLi (China) Test Equipment Co., Ltd
|
15-Pin Versatile Loranger Test Socket for Testing Different Types of Electronic Devices at 100V
![]() |
0.22mm Pitch and Greater Accommodates Package Height Variations Non-Magnetic Socket Options Available Accurate, Tightly-controlled Package Fit Contacts Connect Land pad to Board Pad 013SQ 009J6617 9 Input/Output (I/O) and 0.4 Millimeter (mm) Pitch Land ......
Krunter Future Tech (Dongguan) Co., Ltd.
|