CuNi19 NC025 Corrosion Resistant CuNi Alloy For Marine And Chemical Processing Uses
|
...Resistant CuNi Alloy for Marine and Chemical Processing Uses CuNi19 NC025 Wire is a copper-nickium (CuNi) alloy wire, where the alloy typically consists of 19% nickel (Ni) and 81% copper (Cu). This alloy is also commonly referred to as CuNi19 or NC025. It is well-known for its good mechanical properties, corrosion resistance......
Jiangyin Chengxin Alloy Material Co., Ltd ，
|
High Pressures 0.12μΩ.m20.C Resistivity CuNi Alloy With Tcr Of 50 X10-6/C In Marine Industry
|
..., heat exchangers, and condensers. Its resistance to corrosion and biofouling makes it ideal for marine applications. DLX CuNi Alloy is also used in oil and gas exploration and production. It is used to make tubing, pipes, and other components that can...
Changzhou DLX Alloy Co., Ltd.
|
Heating Resistivity CuNi Alloy For Industrial Applications
|
Product Description: The hardness of CuNi Alloy ranges from 80-120 HV, which makes it ideal for applications that require high strength and durability. This Copper Based Alloy is available in both hard and soft conditions, which allows it to be used in a ......
Changzhou Victory Technology Co., Ltd
|
CuNi23 CuNi Alloy Good Corrosion Resistance Flat Annealed Ribbon/ Strip
|
... alloy is suitable for use at temperatures up to 400°C (750°F). It is very malleable and has a good resistance to corrosion until temperatures of 400°C. Ideal applications areas are all types of resistances used at low temperature, typically used in...
Shanghai Tankii Alloy Material Co.,Ltd
|
Electrical Heating Flat Wire CuNi44 CuNi Alloy Ribbon 420 Degree 0.1*3mm
|
... resistivity and very low temperature coefficient of resistance (TCR). Changzhou DLX alloy offer CuNi44 flat wire. CuNi44 flat wire was founded used in wire-wound precision resistors that can operate up to 400°C (750°F). This alloy is also capable of...
Huona (Shanghai) New Material Co., Ltd.
|
SINO ERLI Solid Copper Nickel Wire Bare Cuni Alloy Spool
|
...Ni, both cut to straight lengths or in coils. Our standard metal and alloy sizes range from 0.13 mm to 2 mm diameter in with strict tolerances and alpha values (conductive resistance) for uses such as gas detection and thermometry tolerances. Typical and...
TOBO INDUSTRIAL (SHANGHAI) CO., LTD
|
Extension T Type Thermocouple Bare Wire Constantan CuNi Alloy
|
...Bare Wire Constantan TNX CuNi Alloy For Thermocouple Extension Compensation Cable Wire TYPE T (Copper vs Constantan) is used or service in oxidizing, inert or reducing atmospheres or in vacuum. It is highly resistant to corrosion from atmospheric moisture......
Ohmalloy Material Co.,Ltd
|
ASME SB111 UNS C71500 O61 CuNi 70/30 2.0882 Copper Nickel Alloy Seamless Tube
|
... for good corrosion and biofouling resistance. The higher nickel content than copper-nickel 90/10 has enhanced mechanical properties and still maintains excellent corrosion resistance. CuNi 70/30 Copper Nickel Alloy Seamless Tubes are widely used in...
Yuhong Group Co.,Ltd
|
Annealed and Pickled 6mm-812mm Austenitic/Duplex/Nickel Alloy Stainless Steel Pipe with Good Abrasion Resistance
|
... UNS C7060X Copper Nickel Alloy Tubes Pipes Tubing Pipings Cupronickel CuNi 90-10 90/10 Cupro Nickel 90/10 CuNi 90-10 90/10 cu ni Cu-Ni 90/10 from china The main alloy elements are copper, chromium and...
Wenzhou Zheheng Steel Industry Co.,Ltd
|
0.08-7.5mm Copper Nickel Alloy Electric Resistance CuNi14 Copper Wire
|
0.08-7.5mm Copper Nickel Alloy Electric Resistance CuNi14 Copper Wire Product Introduction CuNi14 wire, or copper-nickel alloy wire with 14% nickel content, is a metal material with excellent performance. It is composed of 86% copper and 14% nickel, has a ......
CHANGZHOU LIANGRU INTERNATIONAL TRADE CO., LTD.
|
Submit your “0 5 resistivity cuni alloy” inquiry in a minute :