Categories | Development Board |
---|---|
Place of Origin: | Guangdong, China |
Model Number: | ZED-F9P-05B-01 |
MOQ: | 1 |
Type: | GPS Module Development board |
Country of Origin: | Shenzhen Guangdong, China |
Brand: | OTW |
Chipset: | UBLOX |
Application: | Positioning, surveying and mapping, etc |
Dimensions: | 30.6mm * 30mm * 4.2mm |
Positioning Accuracy: | 1cm |
Operating mode: | GPS+GLONASS+GALILEO+ BDS+QZSS+SBAS |
Output Mode: | UART+TTL |
Baud rate: | 4800bps-921600bps,Default38400bps |
NMEA messages: | RMC,VTG,GGA,GSA,GSV,GLL |
Update frequency: | 1Hz-20Hz(default 1Hz) |
Voltage: | 3.6V~6.0V(typical 5V) |
Power consumption: | 80 mA @5V |
Size: | 30.6mm * 30mm * 4.2mm |
Connect: | 6Pin 1.0Jst |
Module performance | ||
Model | ZED-F9P-05B-01 | |
Receiver type | GPS: L1C/A L2C GLONASS: L1OF L2OF Galileo: E1-B/C E5b BeiDou: B1I B2I QZSS: L1C/A L2C SBAS: WAAS, EGNOS, MSAS, GAGAN and SouthPAN | |
Algorithm | Integrated RTK algorithm | |
Agreement | NMEA-0183 Support:VTG,GLL,TXT ublox binary and NMEA Command | |
Available baud rate | 4800bps~921600bps(default 38400bps) | |
Channel | 184 | |
Sensitivity | Tracking: -167dbm Capture: -160dbm Cold start -148dBm Hot start:
-157dbm | |
Cold start | Average 24 seconds | |
Hot start | Average 2 seconds | |
Accuracy | 0.01 m + 1 ppm CEP | |
Max Height | 50000m | |
Max Speed | 500 m/s | |
Max Acceleration | ≦ 4G | |
Regeneration | 1Hz -20 Hz(default 1Hz) | |
RAWX | support multi-GNSS raw measurenmet data output | |
Port | 6PIN 1.0MM JST | |
Size | 30.6mm * 30mm * 4.3mm (+/- 0.5mm) | |
Voltage | 3.6V~6.0V(typical 5V) | |
Power Consume | 80 mA @5V | |
Humidity range | 5% to 95% non-condensing | |
Working Temperature | -40℃ to 85℃ | |
Storage Temperature | -40℃ to 105℃ |
![]() |