IP20 Panic Emergency Powerpack Emergency Light Kit LED Emergency Driver for Triproof Light Down Light Ceiling Light Highbaylight Panel Light

Factory Price IP20 Panic Emergency Powerpack Emergency Light Kit LED Emergency Driver For Triproof Light Down Light Ceiling Light HighbayLight Panel Light

Product description

The MF-188C is an LED emergency driver designed for LED fixtures with external drivers. It features self-detection, constant power emergency output, and a built-in Li-ion battery. Key protections include overcharge, over-discharge, overload, and short-circuit protection. The device has a test switch and LED indicator, with zero static current when powered off. It supports input voltages of 100-277V AC, offers emergency outputs of 3W, 5W, or 8W, and complies with IEC/EN standards. Emergency durations range from 1.5 to 3 hours, depending on battery capacity. The LED indicator shows charging status (green) or faults (red flashes). A quarterly self-test ensures reliability. Installation requires avoiding heat sources and periodic recharging if stored long-term. Warranty: 3 years.

descriptions:

​self-detect
constant power emergency output
Suits for LED fitting with external LED driver
With built-in battery
With multi-protection function;
battery overcharge protection;
battery over-discharge protection;
output overload protection;
short-circuit protection.
Accessary test switch and LED indicator
In the state of the power off, to connect with the battery static current at the battery terminal is 0uA

​

Input voltage	100-277 Vac, 50/60Hz
Input current	0.003A Max. @230Vac
Input wattage	<5.0W
Power factor	≥0.5 @230 Vac
Battery charging	350mA Max.
Battery charging time	>24h
Battery Data	Li-ion 2.0Ah 3.7V
Discharging time&Power	3W 1.5H
Emergency output Voltage	3W: 15-85VDC (Max. 90VDC)
Storage Temperature	-20-40ºC
Electric Strength	2000Vac, 5mA (input to output)
IP Rating	IP 20
Maximum shell temperature	75ºC
Warranty	3 Years
Relevant standard	IEC 61347-2-7 / IEC 61347-1 / EN55015

​

​Wiring Diagram

​

Measure

LED and test button status

LED INDICATOR

Green breathing pattern: charging modeGreen stable: battery fully charged
Red flashing: failure as below
Red flashing once per second: Battery is not connected / Battery is defective
Red flashing four times a second: Load failure during emergency mode, open circuit/short circuit
Green flashing: Emergency status one per second
TEST BUTTON
1: 0S < Key ≤ 2S, Enter a simulated state of emergency, the green indicator blinks once every second, keep emergency status for 10±1 seconds and back to normal status
2: In simulated emergency situations, Short press once to exit and return to the normal charging state
3: 0S < Key ≤ 1S, In the emergency state, the emergency state is turned off.
QUARTERLY SELF-TEST
When emergency driver is on power, every 180 days ± 1 day automatically enter the emergency state, emergency duration until the battery is discharged, then return to power-on status.

​Installation Instructions

1: If it is used for the first time or it does not enter the normal working state after being over-discharged, it is necessary to connect the main power to activate the emergency power supply and charge it for 24 hours. Please use the original emergency battery provided
2: When installing and using it, please keep it away from heat sources and only use it within a certain working temperature range.
3: Should be stored in a cool, dry environment.
4: After prolonged storage, recharge at least once every 6 months as needed.
5: Emergency driver testing must be longer than 1min, don't press the testing button frequently.

​Application

Application:
school,hospital,subway,train station,shoppingmall,supermarket,airport,office, factory,hotel,basement,parking lot,public place

​Packaging & Shipping

Product Line

FAQ:
Q1: Are you a manufacturer?
MF: Yes, we are a manufacturer with our own factory. We have over 14 years of experience in research and development, as well as manufacturing, and we operate based on ISO quality management since 2009.

Q2: Can I order a sample of the LED Light?
MF: Yes, we welcome sample orders to test and check the quality of our products. Mixed samples are also acceptable.

Q3: What is the lead time for the LED Light?
MF: For sample orders, the lead time is 3-7 days, and for mass production orders, it is 15-25 days. The exact lead time depends on the order quantities.

Q4: How do you ship the finished products?
MF: We offer optional shipping methods such as by SEA, AIR, or Express (DHL, UPS, FedEx, TNT, etc.).

Q5: Can I print my logo on the LED Light?
MF: Yes, we provide OEM service to our customers. We can help to make the label and color box according to your requirements.

Q6: How do I proceed with an order for the LED Light?
MF: Firstly, please let us know your detailed requirements and application environment. Secondly, we will recommend some suitable products and solutions to you based on your request. Thirdly, after confirming all the details, customers will issue a purchase order and make the payment to confirm, and then we will start production and arrange shipment.

Q7: How do you handle defective products?
MF: All of our products are produced in strict quality control systems, and the defective rate is less than 0.2% according to our shipment records. We offer a 5-year warranty for this product. If there is any defect during the warranty period, please provide pictures or videos of the defective lights in working situations, and we will ship new lights to you within a few days or together with your next order.

Ming Feng Lighting Co.,Ltd is one of the leading LED light product, located in Guangdong Province, China.  Established in year 2009 and has more than 15 years experience in exporting LED lighting products. Ming Feng LED lighting factory produce LED Indoor Light and LED outdoor lamp. For the LED indoor light, we are producing the LED Triproof Lights, LED Vapor Tight Lights,LED down lights ,LED Flat panel, For the Outdoor LED Light, we are producing the LED flood light, LED high bay lighting, LED stadium lights,outdoor LED landscape light and some of LED Aviation Obstruction light, LED Search light.With the rapid growth of our sales volume in the market, our R&D are expanding quickly to meet the market demands.

Our Company established a quality management system in accordance with the ISO9001 standard. Procuct are CE, CB,ROHS,SAA, ETL,DLC certificed.Our main market is in European, North American, and Southeast Asia.....etc. Ming Feng's lighting products enjoy a wide range of applications. Like workshop, staium, railway, building, airport , tunnel and mines. Our factory locates between Shenzhen port and Guangzhou, it’s convenient to visit our factory and delivery the container to all around the world based on Shenzhen port. 

Ming Feng Lighting Co., Ltd warmly welcome all the partners visit our factory and share the ideas of the LED light. Ming Feng Lighting factory stays with you all the time to share the happiness of the LED light, let’s work together to create an outstanding future.

   ​