ZOA-2 zirconia analyzerZO-III-B ZOA-1 ZOA-P180 ZOA-3A ZOA-3/P1000 HW-010 AOP-3008-XC ZO-BC HOM-200M-GL ZOA-P1000A L-100-2466 ZOA-2000 ZO-7000 YB-88SFJ DVS-YGEN11 SD-ZO-III-PB BWOA-P1000 BWOA-3/P1000

ZOA series zirconia analyzer

The ZOA series intelligent zirconia analyzer is an online oxygen analyzer produced by our company, which can accurately measure the oxygen content in flue gas and provide powerful data for optimizing production for enterprises. This series of products adopts a split flange installation and a straight inserted stainless steel protective tube, which can effectively monitor the oxygen content in flue gas within the range of 0-700 degrees. With the development of industrial production, the requirements for enterprises are becoming increasingly high, and the requirements for our zirconia analyzer are also increasing. The overall requirements are higher accuracy, longer service life, higher stability, and stronger anti-interference. It can be used in different industrial environments, such as garbage power plants, where the combustion medium contains corrosive gases and a large amount of water vapor. A corrosion-resistant and waterproof zirconia probe is needed to greatly increase the product's service life.

ZOA series zirconia analyzer specifications and models:

ZO-III-B Zirconia Analyzer
ZOA-1 Oxygen Analyzer
ZOA-P180 Oxygen Analyzer
ZOA-3A Wall Mounted Oxygen Analyzer
ZOA-3/P1000 Zirconia Analyzer
HW-010 Zirconia Probe
AOP-3008-XC Zirconia Analyzer
ZO-BC Zirconia Oxygen Analyzer
HOM-200M-GL Oxygen Analyzer
ZOA-P1000A Zirconia Probe
L-100-2466 Oxygen Analyzer
ZOA-2000 Zirconia Oxygen Meter Secondary Table
ZO-7000 Zirconia Oxygen Analyzer
YB-88SFJ Explosion proof Zirconia Analyzer
DVS-YGEN11 zirconia analyzer probe
SD-ZO-III-PB Oxygen Analyzer
BWOA-P1000 Zirconia Probe
BWOA-3/P1000 Zirconia Analyzer
ZOA-3A-P1000 ZOA-3A BWOA-3/P1000

Product selection:
Firstly, it is necessary to clarify the temperature range of the flue gas at the measurement location. Secondly, it is important to identify the burning substance, such as whether it is a coal-fired boiler or a gas-fired boiler, waste incineration, etc. The pressure of the flue gas at the measurement location, whether it is positive pressure or negative pressure, and the magnitude of the pressure should be determined. Generally, a location with lower flue gas temperature should be chosen. Of course, we also have high-temperature zirconia probes, and the size of the installation flange. If there is already a flange on site, our product's zirconia probe needs to be installed with a matching flange of the same specification. The choice of insertion depth and length is usually to insert it into the 2/3 position of the flue gas duct. Secondly, the shape of the secondary instrument is available in wall mounted, vertical, and disc mounted versions. We use LCD liquid crystal display, which has strong anti-interference ability and remote signal output of 4-20mA 220VAC.
(1) Temperature of flue gas
(2) Combustion medium
(3) Insertion depth length
(4) Flange size
(5) Secondary instrument appearance

ZO-III-B ZOA-1 ZOA-P180 ZOA-3A ZOA-3/P1000 HW-010 AOP-3008-XC ZO-BC HOM-200M-GL ZOA-P1000A L-100-2466 ZOA-2000 ZO-7000 YB-88SFJ DVS-YGEN11 SD-ZO-III-PB BWOA-P1000 BWOA-3/P1000

TF-TK-EX TF-TK-YHG TF-TK-ZRO XL-TF-TK TF-TKEN TK-YB EX-NFZRO TK-FX/ZOA TKFX-ZOA,ZO-2000 MKFB-400-A/H ZOA-300B,ZO-FIIB CY-ZC CY-ZDA OXT3000 YB-88G OXT1000 TKZO-5 NFZRO2-5 ZR402G CE-2C CE-2D ZFK8R FZZRO2-5 YB-88GJ-ZW OAM-800 OAM-802 6000 TES300E OCM6E BOA-807 BOA-807-R EXFZZRO2-88 NFZO-05 MK-400-A-FHC OAM-800 OAM-800-R OAM-802 OAM-802-R

CYZDA-ISG-FB-1000 CYZC/G-ISG-FB-III-180-YLS CYZC-ISG-FB-JGDJ-II-F ISG-FB-1200 ISG-FB-JGDJ-II-F CYZC-ISG-FB-180-SPQ/DZ-II SYAN-001 ISG-FB-JGDJ-II-F

CECK-ISG-C CECK-ISG-CH CECK-ISG-CX SPE-2000 CE-2C CE-2D CEX-S767 S-2000-A CE-2C,CE-2CW,CE-2CS,CE-2D,CE-2DH,CE-2DS,SPE-2000

YB-88GJ-DW-400 YB-88GJ-DW-600 YB-88GJ-DW-1000 YB-88G-DW-1200mm YB-88G-GWP-1000 YB-88G-GWP-1200 YB-88GZ-4 YB-88G-D YB-88G-D-400 YB-88G-D-600 YB-88G-D-1000 YB-88G-D-1200mm

BRCNZOR-RH BRCNZOR-HM BRCNZOR-MS BRCNZOR-SS

YK-2000-A YK-2000-A YK-2000-A/DL YK-2000-A/YT YK-2000-A/GW YK-2000-A/ZY BRCNZOR-RH BRCNZOR-HM BRCNZOR-MS BRCNZOR-SS

Our company produces and sells various stainless steel products, and supports customized production of various non-standard products. Stainless steel products are mainly used in fields such as medicine and universities.

<span style="font-family: " pingfang="" sc",="" "microsoft="" yahei",="" "segoe="" ui",="" "lucida="" grande",="" helvetica,="" arial,="" freesans,="" arimo,="" "droid="" sans",="" "wenquanyi="" micro="" hei",="" "hiragino="" sans="" gb",="" gb="" w3",="" fontawesome,="" sans-serif;"="">Our company also can export kinds of stainless steel products, electronic components, wires and cables, automotive and motorcycle accessories, packaging materials, glass products, pipe fittings, lighting appliances; Sales of hardware and electrical products, textile fabrics, bicycle accessories, cosmetics, electromechanical products, ceramic products, and metal materials, as well as import and export of various commodities and technologies through self operation and agency (excluding commodities and technologies restricted or prohibited by the state for company operation or import and export)***