Semi-Automatic 18650 Lithium Battery Spot Welder Multi-Pulse Welding Power Supply

Power lithium-ion battery module, 3C lithium-ion battery pack, nickel-metal hydride battery pack, hardware small parts, electronic and electrical

parts, wire terminals, stainless steel parts, metal jewelry, copper products, aluminum products, etc. At the same time, it is also suitable for product

maintenance proofing and other work.

1) Using air source solenoid valve signal control

2) Configurable semi linkage function

3) The height of the equipment welding head can be adjusted up and down, and the minimum height of the battery should not be less than 50MM, and the maximum height should not exceed 220MM (the height of the higher version is 300MM). All within this range can be welded.

4) The detachable design of the welding head clamp can be used for both convex spot welding and pointed needle spot welding.

5) High quality tempered glass is used to protect the desktop from wear and tear, making it easy to move during welding.

6) Independently developed precision welding machine head, with precise and adjustable welding pressure and buffer adjustment pressure mechanism, can effectively reduce damage to battery cells during welding.

7) The power supply can store welding parameters internally, with a total of 10 sets of welding parameters. It can weld nickel sheets of different thicknesses and can be easily accessed, making it simple and convenient.

8) By adopting dual stage multi pulse regulation, the welding output energy waveform can be improved, the welding ability can be enhanced, and the welding points can be firm and beautiful. Low power failure rate and high spot welding efficiency

9) The power supply is equipped with automatic monitoring and tracking compensation of grid voltage, which can effectively reduce adverse phenomena such as virtual welding and achieve high-quality welding

10) Using digital LED display, the interface is simple and easy to adjust. The various parameters of the device are more intuitive, easy to learn and operate.

11) The welding power supply adopts a design of post discharge electrodes and can be assembled on automated welding equipment.

12) Adopting industrial grade circuit design, the circuit is safe, reliable, and has a low failure rate.

13) The appearance of the equipment is exquisite, with superior structural design, compact and reasonable structure, small size, and high power.

14) The whole machine adopts high-quality components

1. Thickened tempered glass
High quality explosion-proof glass is used to effectively prevent the damage caused to the desktop during welding. At the same time, it can increase the fluency of welding and increase the welding efficiency.

2. Cylinder drive

The air source interface is connected to the pressure regulator to adjust the air source pressure and filter the water. The gas is sent to the solenoid valve, which controls the gas drive cylinder and drives the welding head.

3. Pneumatic precision welding head

Horizontal welding structure, double linear guide design, left and right pressure can be adjusted separately. Built-in pressure sensor, precise control to apply stable pressure.

Q: How do I install and run the machine?

A: Our technicians had installed the machine before shipment. For the installation of some widgets, we will send out detailed training videos and user manuals randomly. 95% of customers can teach themselves.

Q: How can I do if the machine goes wrong?

A: If you encounter such problems, please contact us as soon as possible. Do not try to repair the machine by yourself or others. We will respond as soon as possible within 24 hours to solve your problem.

Q: I don't know which one is right for me?

A: Please tell us the following information

1) Battery model and type.

2) Welding material and welding thickness

3) Commercial industry: We have a lot of sales experience and can provide you with advice.

Q: What's your minimum order quantity?

A: We don't have a minimum order quantity. Whether it is an order of 1 or 100, we will wholeheartedly support you.

Q: How does your factory do in terms of quality control?

A: Quality comes first. More than 20 tests will be performed on each unit. After all the tests are passed, our QC will test the welding performance.

Service process

After sale:
1. Confirm whether customers need on-site service or video communication guidance for debugging equipment.
2. If there is any problem with the equipment, video communication will be adopted to solve the problem first. Door-to-door service can be provided if there is no solution.

Pre-sale:
1. Customers send inquiries and inquiries
2. Recommend products according to customer needs
3. Video communication to confirm final requirements
4. Both parties shall deliver the confirmation of technical specifications
5. Both parties sign the contract
6. Place orders and arrange production in the workshop
7. Arrange delivery
Looking forward to your consultation, we will provide you with the best quality service throughout the process!!!