Home > Measuring & Analysing Instrument Processing Services >

12W Constant Current Dali LED Dimmable LED Driver with Primary PUSH Dimming Control Method

Categories Dimmable LED Driver
Brand Name: KREATPOWER
Model Number: KL12C-PDii
Certification: ENEC, CB, CE
Place of Origin: Shenzhen, China
MOQ: 100pcs
Price: Negotiable
Payment Terms: T/T
Supply Ability: 20,000pcs per month
Delivery Time: 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 4-5 weeks after receiving deposit.
Packaging Details: Instruction+clapboard+outer carton(K=A)
Operating Voltage: 198-264Vac 50Hz /60Hz
Stand-by power: ≤0.5W(@230Vac when PUSH or DALI turn off)
Operating mode: Constant Current
Load type: LED
Control method: Primary PUSH Dimming, DALI Dimming
Operating temperature: -25℃~50℃ Humidity:85% (Non-condensing)
IP rating: IP20
Warranty: 5 years guarantee @Ta full load
  • Product Details
  • Company Profile

12W Constant Current Dali LED Dimmable LED Driver with Primary PUSH Dimming Control Method

12W constant current Dali LED Dimmable LED Driver


【Product Feature

  • Flicker-free for whole dimming range
  • Stand-by power below 0.5W
  • Primary dimming with push button
  • Built-in DALI interface DT6
  • Protection: short circuit / over temperature/ over voltage
  • Derating current for over high ambient temperature
  • Push dim with memory function
  • 5 year warranty

Parameter

InputMicro seriesKL12C-PDii
Operating Voltage198-264Vac 50Hz /60Hz
Rated Input Voltage220-240Vac 50Hz /60Hz
DC Input Voltage range200-240Vdc
Input Current0.08A Max.
Input Inrush Current<15A (Half current pulse width100μs) @230Vac
Power factor(@230V100% load)≥ 0.93C
Total harmonic distortionTypical: 18% (@230Vac, 100% load)
Stand-by power≤0.5W (@230Vac when PUSH or DALI turn off)
Efficiency(@230Vac,100% load)83%
Wiring Method0.75-1.5mm2

Automatic circuit breaker


KL12C-PDii (Calculate current in the wire)
typeC10C13C16C20C25
Number7080105130160
typeB10B13B16B20B25
Number40506585100
OutputOperating modeConstant Current
Load typeLED
Ripple requirement (Flickering or Flickering-Free)Flicker value: less than 2% for whole dimming range
Start up time<1s (@230Vac,)
No-load output voltage30V DC Max.
Load output voltage range3-24V DC
Full load output power12W
Load output current

350mA(3-24)

500mA(3-24)

550mA(3-22)

700mA(3-17)

Constant current/voltage PrecisionConstant Current Precision ±5%
Wiring methodPush terminal, wire cross section:0.75-1.5mm2
Control MethodPrimary PUSH DimmingPrimary PUSH dimming (Max.lead length:20M)
DALI DimmingDALI dimming (Max.lead length:300M)
Exception Protection RequirementsOutput over temperature
protection
Yes, without self recovery function(Can be inquired)
Output short circuit protectionYes, without self recovery function(Can be inquired)

Operating

Environment

Operating temperature/ humidity-25℃~50℃ Humidity:85% (Non-condensing)
Storage temperature/ humidity-40℃~80℃, Humidity:10%–95%
Max. case temp(Tc)85℃

Safety & EMC

EMC standardEN55015 EN61547 EN61000-3-2 EN61000-3-3
DALI protocol standardIEC62386-102, IEC62386-207 DT6
Safety standardEN61347-1 EN61347-2-13
CertificationENEC CB CE
Withstand voltage3750Vac, 5mA, 60s (Input “L N”- Output “SEC”)
OthersDegrees of protectionIP20
Type of protectionClass II
Installation typeIndependent installation
With crimping88*52*25.5mm116*40.5*22mm136*42.5*24mm
Blackout memory functionYes, PUSH blackout memory
PUSH dimming synchronization20 units Max.
Packaging requirementInstruction+clapboard+outer carton(K=A)
Weight105g
Design life10 years ( @ Ta - 15 ℃)
Warranty5 years guarantee @Ta full load
Note: All parameters are tested at the input voltage of 230Vac and 25 degree environment unless specified.

Dimension (Unit:mm)


Wiring Diagram

Fig. A DALI Dimming


Fig.B Push Dimming


Derating


【Dimming curve


Current gear setting

KL12C-PDii

Current gear setting

12
350mA(3-40V)
500mA(3-40V)
550mA(3-38V)
700mA(3-36V)

ON/OFF & Description of Dimming Operation

A. Short press the PUSH switch (short press time 0.1S-1S), the LED driver will turn on or off.

B. Dimming: Press and hold the PUSH switch (1S-8S), the LED driver can achieve dimming, brightening or dimming, the dimming range is 2-100%.

C. Memory: PUSH dimming has dimming memory function.

D. Dimming synchronization: The power connected to the same PUSH switch can be synchronized by pressing and holding the PUSH switch for longer than 15S

E. DALI dimming mode: Connect the power supply to the DALI system, and it can be dimmed by the DALI host. The dimming range is 0-100%.


【Attention

1) The LED string must be connected to the load before turning on the input power, otherwise the LED string may be damaged.

2) After the LED drive input is powered off, there will be a residual voltage at the output, which can be maintained for about 3 minutes.

Cheap 12W Constant Current Dali LED Dimmable LED Driver with Primary PUSH Dimming Control Method for sale
Send your message to this supplier
 
*From:
*To: Shenzhen Merrytek Technology Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
Submit Buying Request
Contact Us Quickly