| Categories | Alloy Steel Pipe |
|---|---|
| Brand Name: | BY |
| Model Number: | BYAS00053 |
| Certification: | PED SGS ISO TUV |
| Place of Origin: | China |
| MOQ: | 1 pcs |
| Price: | Negotiable |
| Payment Terms: | L/C, T/T, Western Union |
| Supply Ability: | 10000 ton per Month |
| Delivery Time: | 5-8 work days |
| Packaging Details: | PLY-WOODEN CASE OR PALLET |
| Product Name: | Alloy Steel Pipe |
| Material: | Nickel-Cobalt Alloy |
| OD: | 1/2"-12” |
| Type: | Seamless or welded |
| Thickness: | SCH 20-SCH XXS |
| End: | BE or PE |
| Standard: | EN10216-2 P235GH |
| Prodcut: | steel pipe tube |
Alloy Steel Seamless Pipe EN10216-2 P235GH For Elevated Temperature Service
Seamless steel tubes for pressure purposes
Non-alloy steel tubes with specified elevated temperature properties
Alloy steel tubes with specified elevated temperature properties
The requirements of this European Standard rule when they differ from those in the standards and documents referred to below:
EN 10002-1, Metallic materials - Tensile testing - Part 1: Method of test (at ambient temperature).
EN 10002-5, Metallic materials - Tensile testing - Part 5: Method of testing (at elevated temperature).
EN 10020, Definitions and classification of grades of steel.
EN 10021, General technical delivery requirements for steel and iron products.
EN 10027-1, Designation systems for steels - Part 1 : Steel names, principle symbols..
EN 10027-2, Designation systems for steels - Part 2: Numerical systems.
EN 10045-1, Metallic materials - Charpy impact test - Part 1: Test method.
EN 10052, Vocabulary of heat treatment terms for ferrous products.
EN 10204, Metallic products - Types of inspection documents.
ENV 10220, Seamless and welded steel tubes - Dimensions and masses per unit length
EN 10233, Metallic materials - Tubes - Flattening test.
EN 10234, Metallic materials - Tubes - Drift expanding test.
EN 10236, Metallic materials - Tubes - Ring expanding test.
EN 10237, Metallic materials - Tubes - Ring tensile test.
EN 10246-1, Non-Destructive Testing of steel tubes Part 1: Automatic electromagnetic testing of seamless and welded (except submerged arc welded) ferromagnetic steel tubes for verification of hydraulic leak-tightness.
EN 10246-5, Non-Destructive Testing of steel tubes – Part 5: Automatic full peripheral magnetic transducer/flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal imperfections.
EN 10246-6, Non-Destructive Testing of steel tubes - Part 6: Automatic full peripheral ultrasonic testing of seamless steel tubes for the detection of transverse imperfections.
EN 10246-7, Non-Destructive Testing of steel tubes - Part 7: Automatic full peripheral ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of longitudinal imperfections.
EN 10246-14, Non-Destructive Testing of steel tubes - Part 14: Automatic ultrasonic testing of seamless and welded (except submerged arc welded) steel tubes for the detection of laminar imperfections.
EN 10256, Non-Destructive Testing of steel tubes - Qualification and competence of level 1 and level 2 NDT personnel.
EN ISO 377, Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:1997)
prEN 10168, Iron and steel products - Inspection documents - List of information and description.
prEN 10266, Steel tubes, fittings and structural hollow sections - Symbols and definition of terms for use in product standards
EN ISO 2566-1, Steel - Conversion of elongation values – Part 1: Carbon and low-alloy steels
(ISO 2566-1:1984)
ISO 14284, Steel and iron - Sampling and preparation of samples for the determination of chemical composition
CR 10260, Designation systems for steel - Additional symbols
CR 10261, ECISS Information Circular IC 11 - Iron and steel - Review of available methods of chemical analysis.
Deoxidation process
Steels shall be fully killed.
The tubes shall be manufactured by a seamless process.
Option: The tubes shall be cold finished before heat treatment.
Chemical composition, %
| Grade | C | Si | Mn | P, max | S, max | Cr | Mo | Ni | Al | Cu | Nb | Ti, max | V | Cr+Cu +Mo+Ni | Others |
| P235GH | ≤0.16 | ≤0.35 | ≤1.20 | 0.025 | 0.020 | ≤0.30 | ≤0.08 | ≤0.30 | ≥0.02 | ≤0.30 | ≤0.01 | 0.040 | ≤0.02 | ≤0.70 | - |
| P265GH | ≤0.20 | ≤0.40 | ≤1.40 | 0.025 | 0.020 | ≤0.30 | ≤0.08 | ≤0.30 | ≥0.02 | ≤0.30 | ≤0.01 | 0.040 | ≤0.02 | ≤0.70 | |
| 13CrMo4-5 | 0.10-0.17 | ≤0.35 | 0.40-0.70 | 0.025 | 0.020 | 0.70-1.15 | 0.40-0.60 | ≤0.30 | ≤0.040 | ≤0.30 | - | - | - | - | - |
| 10CrMo9-10 | 0.08-0.14 | ≤0.50 | 0.30-0.70 | 0.025 | 0.020 | 2.00-2.50 | 0.90-1.10 | ≤0.30 | ≤0.040 | ≤0.30 | - | - | - | - | - |
| 15NiCuMoNb5-6-4 | ≤0.17 | 0.25-0.50 | 0.80-1.20 | 0.025 | 0.020 | ≤0.30 | 0.25-0.50 | 1.00-1.30 | ≤0.05 | 0.50-0.80 | 0.015-0.045 | - | - | - | - |
| X10CrMoVNb9-1 | 0.08-0.12 | 0.20-0.50 | 0.30-0.60 | 0.020 | 0.010 | 8.00-9.50 | 0.85-1.05 | ≤0.40 | ≤0.04 | ≤0.30 | 0.06-0.10 | - | 0.18-0.25 | - | N: 0.030-0.070 |
Mechanical properties
| Steel grade | Upper yield strength or proof strength ReH or Rp0,2 for Wall Thickness T min. | Tensile strength Rm | Elongation A min. % | ||||
| T≤16 | 16<T≤40 | 40<T≤60 | 60<T≤100 | I | T | ||
| MPa | MPa | MPa | MPa | MPa | |||
| P235GH | 235 | 225 | 215 | - | 360-500 | 25 | 23 |
| P265GH | 265 | 255 | 245 | - | 410-570 | 23 | 21 |
| 13CrMo4-5 | 290 | 290 | 280 | - | 440-590 | 22 | 20 |
| 10CrMo9-10 | 280 | 280 | 270 | - | 480-630 | 22 | 20 |
| 15NiCuMoNb5-6-4 | 440 | 440 | 440 | 440 | 610-780 | 19 | 17 |
| X10CrMoVNb9-1 | 450 | 450 | 450 | 450 | 630-830 | 19 | 17 |
Minimum proof strength Rp0,2 at elevated temperature
| Steel grade | Wall thickness mm | Minimum proof strength Rp0,2 MPa at temperature of °C | ||||||||||
| 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 550 | 600 | ||
| P235GH | ≤60 | 198 | 187 | 170 | 150 | 132 | 120 | 112 | 108 | - | - | - |
| P265GH | ≤60 | 226 | 213 | 192 | 171 | 154 | 141 | 134 | 128 | - | - | - |
| 13CrMo4-5 | ≤60 | 264 | 253 | 245 | 236 | 192 | 182 | 174 | 168 | 166 | - | - |
| 10CrMo9-10 | ≤60 | 249 | 241 | 234 | 224 | 219 | 212 | 207 | 193 | 180 | - | - |
| 15NiCuMoNb5-6-4 | ≤80 | 422 | 412 | 402 | 392 | 382 | 373 | 343 | 304 | - | - | - |
| X10CrMoVNb9-1 | ≤100 | 410 | 395 | 380 | 370 | 360 | 350 | 340 | 320 | 300 | 270 | 215 |
Appearance
1 The tubes shall be free from external and internal surface defects that can be detected by visual examination.
2 The internal and external surface finish of the tubes shall be typical of the manufacturing process and, where applicable, the heat treatment employed. Normally the finish and surface condition shall be such that any surface imperfections requiring dressing can be identified.
3 It shall be permissible to dress, only by grinding or machining, surface imperfections provided that, after doing so, the wall thickness in the dressed area is not less than the specified minimum wall thickness. All dressed areas shall blend smoothly into the contour of the tube.
4 Any surface imperfection, which is demonstrated to be deeper than 5 % of the wall thickness T or 3 mm whichever is the smaller, shall be dressed. This requirement does not apply to surface imperfection with a depth equal or less 0,3 mm
5 Surface imperfections which encroach on the specified minimum wall thickness shall be considered defects and tubes containing these shall be deemed not to conform to this Part of EN 10216.
Leak Tightness
The tubes shall pass a hydrostatic test (see 11.8.1) or electromagnetic test for leak-tightness.
Content of inspection documents
The content of the inspection document shall be in accordance with prEN 10168.
The inspection certificate or inspection report shall contain the following codes and information:
- commercial transactions and parties involved;
- description of products to which the inspection document applies;
- direction of the test pieces and testing temperature;
- tensile test;
- impact test if applicable;
- other tests (e.g. flattening);
- chemical composition on cast analysis (product analysis if applicable);
- marking and identification, surface appearance, shape and dimensional properties;
- leak-tightness test, NDT, material identification if applicable;
Test methods
1 Chemical analysis
2 Tensile test
2.1 tensile test at room temperature in accordance with EN 10002-1
2.2 tensile test at elevated temperature in accordance with EN 10002-5
3 Flattening test in accordance with EN 10233
4 Ring tensile test in accordance with EN 10237
5 Drift expanding test in accordance with EN 10237
6 Ring expanding test in accordance with EN 10236
7 Impact test in accordance with EN 10045-1
8 Leak tightness test
8.1 Hydrostatic test
8.2 Electromagnetic test in accordance with EN 10246-1
9 Dimensional inspection
10 Visual examination
11 Non-destructive test
Seamless Steel Tube Specifications
Standard : EN10216-2
Outside Diameter: 325-1067 mm
Wall Thickness: 9.53-140 mm
Length: On the request
| Place of Origin | China | Brand Name | BOYUE |
| Standard | ANSI, ISO, ASME, DIN, ASTM | Type | Seamless |
| ModelNumber | Alloy Steel Pipe | Thickness | SCH 5-SCH XXS |
| Packing | Depending on customer | Payment | 30%TT+70% Balance |
Supply Ability:40000Pieces / per Month
Packaging & Delivery
Packaging Details:Generally plywooden case or following customer's
requirement.
Port:Shanghai/Tianjin
Commerce Clause
| Minimum Order Quantity: | 1pcs |
| Price: | Depending on quantity |
| Payment Terms: | T/T or Western Union or LC |
| Supply Ability: | 40000 ton per month |
| Delivery Time: | 10-100 days depending on quantity |
| Packaging Details: | Depending on customer |
Why Choose Us
1.One-Stop Service,One Single Source.
2.No MOQ.
3.Best quality,competitive price
4.Fast Reply.
5.On-Time Delivery
6.Professional sales and technical team .
FAQ
Q1: Are you a factory or a trade company?
A1: We are a professional manufacturer for designing and producing
of Large-size products.(View Mor)
Q2: Do you make customized products or finished parts?
A2: All parts are custom made only, and in stock, we can produce
based on your drawings.
Q3: Will my drawing be e after you get it?
A3: Yes, we will not release your design to third party unless with
your permission.
Q4: What is the MOQ?
A4: Small order is acceptable, but the more, the cheaper.
Q5: How about the samples?
A5: We are happy to make prototype part or sample for clients to
ensure quality standard, but it’s charged according to your
drawing.
|
4 Inch SCH 40 Seamless Alloy Pipe Incoloy X800 Nickel Alloy Steel Pipe For connection
ASTM B622 Nickel Alloy Steel Pipe UNS NO10276 Seamless Alloy Steel Pipe 25mm*2mm*2500mm
ASTM A335 P5 P9 Alloy Steel Seamless Welded Pipe SCH 5X - SCH 160 ISO SGS BV TUVBE / PE End
ASTM A333 1/2" - 48" Alloy Steel Pipe / Seamless And Welded Pipe With Heat Treatment
ASTM A335 P91 SCH High Pressure Alloy Welded Steel Pipe Low Alloy Steel Seamless OD1/2"-48”
ASTM A335 P22 Alloy Steel Seamless Pipe Beveled Plain End SCH 5 - SCH XXS OD 1/2-48'
ASTM A335 Oxidation Resistance Seamless Welded Pipe Welded Steel Pipe For High Temperature
ASTM A335 P5 P9 P11 BE / PE End Seamless / Welded Ferritic Alloy Steel Pipe OD 1/2-48' Sch-XXS
OD1/2-48' Low Temperature Alloy Steel Pipe ASTM A333 GR.6 Seamless Welded Pipe 1/2"- 48"
ASTM B622 UNS N10276 Hastelloy Pipe C 276 Seamless Pipe Tube Custom Size 1/2-48'
Best UNS N10675 B3 Hastelloy Pipe Beveled End Finish 1/2 - 48 OD ASME SB-163 For Industry wholesale
Best ASME Hot Rolling Hastelloy B2 Pipe SCH 5 - SCH UNS N10665 High Precision OD1/2-24' For Industry wholesale
Best ASTM B622 UNS N06200 Hastelloy C2000 Seamless Nickel Alloy Pipe And Tube OD1/2-48' wholesale
