Name: Simple Hydraulic Steel Sheet Slitting Machine For Carbon And Galvanized
Brand: RISHBIN
Price: 1 USD

Simple Hydraulic Steel Sheet Slitting Machine For Carbon And Galvanized

Categories	Steel Sheet Slitting Machine
Brand Name:	RISHBIN
Model Number:	RS 3.0-12.0
Certification:	CE
Place of Origin:	Wuxi， China
MOQ:	1 PCS
Price:	Negotiable
Payment Terms:	L/C, T/T, Western Union
Packaging Details:	Cartoon
Product Name:	Steel Sheet Slitting Machine
Strip Width:	≥100mm
Slitting Accuracy:	±1.0mm
Coil I.D:	φ508,φ610,φ760mm
Color:	Requirement
Type:	Coil Slitting line

Contact Now

Add to Cart

Product Details
Company Profile

Simple Hydraulic Steel Sheet Slitting Machine For Carbon And Galvanized

0-60m/Min Steel Sheet Slitting Machine 3.0-12.0mm High Speed Ф320 Blade Shaft

Steel Sheet Slitting Machine Introduction

Minimum Burr on strip.
Automatic Coil Loading
2 complete slitting heads for quick offline tooling changeovers.
Straight edged recoiling.
Economic efficency due to high automation level.
Ease of Operation and Maintenance
Slitting Lines are available in different sizes and models as per the demands and specifications laid by the clients.
It is available in different capacities and standards according to the demand of the clients.
These Slitting Lines are widely appreciated amongst our clients for their user friendly designs and high resistance to temperature variations.

Knives:

These knives partially penetrate the coil stock causing a crack or fracture on both sides of the stock, separating the mults from one another. Rubber stripper rings are also employed depending on the material thickness to attain a good edge so no burr is present that will hinder downstream operations. As the material is slit, the far outside edges of the coil have edge trim.

Edge trim:
This edge trim is taken up on a scrap winder. If the material to be slit is extremely thin, a looping pit can be used to take up the varying thickness of the mults as the edge cuts are generally thinner than the center cuts. The thin the material, the longer the lineal footage in the master coil.
The looping pit will take up the additional volume prior to entering the tension stand. The tension stand is located prior to the recoiler. A tensioning device is needed because the master coil is crowned or larger in diameter in the center of its width than at the edges.

Without a tension stand, the slit material from the center of the master coil would take up more quickly while the outboard strips would hang loosely. The recoiler is an expanding mandrel type. The recoiler takes up the slit mults. The recoiler mandrel is fitted with an overarm device which is a shaft with separator discs which prevent interleaving of the narrower coil widths.

The position of the discs are directly in-line with the slitting knives. The finished slit mults are banded on the outside diameter and are pushed off of the recoiler mandrel onto an awaiting coil car or turnstyle.

Steel Sheet Slitting Machine Specification:

Model No.	RS 3.0-12.0	RS 4.0-16.0	RS 6.0-20.0
Coil Material	CR Coils , HR Coils, S.S Steel Coils, GI Coils, AL Coils, Copper Coils Picking Oil Coils
Coil Thickness	3.0～12.0mm	4.0～16.0mm	6.0～20.0mm
Line Speed	0～60m/min	0～50m/min	0-50m/min
Coil Weight	≤30T(35T)	≤30T(35T)	≤30T(35T)
Coil I.D	φ508,φ610,φ760mm	φ508,φ610,φ760mm	φ508,φ610,φ760mm
Coil O.D	≤φ2200mm	≤φ2500mm	≤φ2500mm
Strip Width	≥100mm	≥100mm	≥100mm
Number of Strip	5～20	≤5	≤5
Slitting Accuracy	±1.0mm	±1.0mm	±1.0mm
Blade shaft	Ф320	Ф340mm	Ф360mm
Electrical Control System	PLC Automatic control	PLC Automatic control	PLC Automatic control

COIL/ROLL DETAILS	Material	HR, CR, SS, GI, PPGI,
	Tensile Strength	δb≤550Mpa,δS≤260Mpa
	Coil/Roll thickness	6-20mm
	Steel Coil/Roll width	600-2500(Max)
	Coil/Roll I.D	Φ500-760 mm
	Coil/Roll O.D	Φ2500mm(Max)
	Steel Coil/Roll Weight	35T(Max)
Slitter parameters	knife pivot diameter	Ф360 mm
	Knife pivot material	40Cr
	Blades specification	Φ360mmXφ360mmX20mm
	Blade material	6CrW2Si
	Max slit quantity	4 pcs (16mm) 8 pcs(8mm)(Customized)
	Width precision	≤±0.05mm/2M
Other parameters	Power	380V/50Hz/3Ph(Customized)
	Line speed	0-60m/min
	Capacity	450 KW
	Whole line Dimension	45m(L)X10m(W)

	Line direction	From right to left(Face to machine)
	Machine color	Blue

Product Tags:


*From:	Your email address is incorrect!
*To:	RISHBIN CO., LTD
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Simple Hydraulic Steel Sheet Slitting Machine For Carbon And Galvanized

Simple Hydraulic Steel Sheet Slitting Machine For Carbon And Galvanized

Simple Hydraulic Steel Sheet Slitting Machine For Carbon And Galvanized

pneumatic sheet metal cutter

steel slitting equipment

Simple Hydraulic Steel Sheet Slitting Machine For Carbon And Galvanized