M8 Size CE Approval Metal Insulation Fixing, 60MM - 230MM Metal Insulation Plug

metal insulation fixing/ insulation plug is a special engineering metal expansion nail that fixes the insulation board to the wall.

Insulation anchor pins are special anchors for exterior wall insulation, which are widely used in building decoration and anchoring

of wall insulation houses. It consists of a metal tube and a fixed disc. According to the thickness of the insulation layer, it is divided

into various specifications.

The performance parameters are based on the JG/T366-2012 standard:

1. The nominal diameter of the Pin disc should not be less than 30mm and the tolerance is 1.0mm.

2.The nominal diameter of the expansion sleeve shall not be less than 8 mm and the tolerance shall be ± 0.5 mm.
3. Anchor bolt tensile bearing capacity standard value Fk≥0.60
4. insulation anchor pin's Disc pullout standard value Frk≥0.50

5. Fire-proof level: A

features of insulation fixng /metal insulation plug

• It has anti-aging, anti-temperature sudden change, anti-corrosion, cold and heat resistance;
• high bearing capacity, high pressure bearing, good tensile performance;
• not easy to deform, moisture, vibration, and good thermal insulation after loading.
• Easy to install, no special installation tools are required.
• The galvanized screw solves the corrosion problem well, has good durability,
• the heat transfer performance of the nylon material is low.
• There is no cold bridge in winter, and the energy is high.

Application of insulation fixing/ metal insulation plug

The number of installations: 1-10 layers average 6 / m2, 11-20 layers average 7 / square meters 21-26 layers 9 / m2.

Any single block with an area greater than 0.1m2 must be anchored, depending on the shape and site conditions;

the density of the anchor should be increased around the angle of the sun, under the mouth, and around the edge of the hole.

The distance is not more than 300mm, from the edge of the base. Not less than 60mm

• 110mm insulation fixings for 40-70mm insulation boards
• 145mm insulation anchors for 75-105mm insulation slabs
• 170mm fireproof fixings for 105-130mm insulation panels
• 200mm metal fasteners for 135-160mm insulation boards

images of insulation fixing/ metal insulation plug pins

15 YEARS EXPERIENCE
PROFESSIONAL MANUFACTURER OEM/ODM
ONE-STOP CUSTOM FACTORY
MEET YOUR INDIVIDUAL PROCESSING
ENSURE QUALITY AND PRECISION

About HUIHAO

China HUIHAO was established in 2013. We mainly manufacture and supply Wire mesh and insulation fastener. Our corporate headquarter is located in Changan Industrial area Shijiazhuang Hebei, factory is located in Anping Town Hengshui City. Both sites are adjacent to highway intersections, convenient and near to Tianjin ports.

We have been focused on manufacturing, research and development of wire mesh and insulation fastener more than 10 years, HUIHAO is a leading Chinese insulation fastener manufacturer knowing the European and American standards well, supply a full ranges of wire mesh, insulation pins and washers. They are widely used in HVAC, petrochemical industry, equipments insulation, shipyards, wall insulation etc. And moreover, we develop the solar panel mesh clips. In 2020 we expand our business lines of laser cutting and various customized stamping parts, providing one - stop OEM services.

Our main products are Round & Rectangular Lacing Anchor, Self Locking Washer, various of Cup Head Pin (SS Quilting Pin, Cup Head Weld Pin Insulated, Cup Head Weld Pin Without Insulation), Duct Liner Weld Pin, Perforated Base Pin, Self Adhesive Pin, Wire Mesh, various of Solar Panel Mesh Clip (stainless steel, aluminum and nylon)etc. All of our products are produced by own automatic production.

READ MORE

PACKAGING AND TRANSPORTATION

Standard packaging to ensure products arriving at destination in good condition