MSDS Graffiti Spray Paint , Outdoor Spray Paint With Orange Yellow Color

MSDS Graffiti Spray Paint , Outdoor Spray Paint With Orange Yellow Color

NOTE

• Before application, stir paint evenly and when paint is too thick, thinner within specified quantity can be added.
• Adhered moisture, grease, dirt, damaged or loose old paint and corrosive salts on substrate must be cleaned thoroughly.
• Avoid applying the paint in rainy,humid weather or substrate temperature excessively high to 40C or low to 10C.
• Avoid applying to insufficient drying of previous paint coat.

Precautions:

1. Content under pressure. Keep away from heat, flame, spark and other source of ignition.
2. Do not spray on objects with direct contact of food.
3. Spray in well-ventilated place. A better coating effect will be gained if operate in a cool, dry and dustless environment.
4. Avoid applying the lacquer on a rainy or freezing day.
5. Do not clash, puncture, or incinerate the can, even after use.
6. Store in a cool, dry place (45℃); Avoid direct sunlight.
7. Keep out of the reach of children.

PREPARATION

For best results, clean surface of grease, wax, rust and dust. Scuff or lightly sand all glossy surfaces removing any unwanted bumps or flaking paint, then dust off. Prime raw timber or metal with Aeropak primer and allow to fully dry.

APPLICATION

IMPORTANT : Shake the can vigorously for one minute before use. Holding the can 30cm from prepared surface, begin by applying one light mist coat, spraying in a continuous motion across the surface working left to right. Pause, allowing the mist coat to set for 30 to 60 seconds, then apply additional coats working at 90° to the first coat. If a thicker finish is required, allow at least one hour between extra coats. When painting over existing paint always check compatibility.

CLEAN UP

Clean any over spray with mineral turps or general-purpose thinners. For better long term storage, turn can upside down and spray until no paint is coming out.

CORRECT DISPOSAL

Spray unneeded product on to newspaper dispose to waste.
Empty can is recyclable.

PRECAUTIONS

• Do not use near fire or naked flame.
• Do not puncture or incinerate even if empty.
• Keep in a cool place out of direct sunlight.
• Do not store above 50°C. / 122 F
• Never spray at eyes or face.

PROPELLANT: HYDROCARBON

SAFETY WARNINGS

Keep out of reach of children
If swallowed seek medical advice immediately.

Warning - intentional misuse by deliberately inhaling contents
can be harmful or even fatal.

Shenzhen i-Like Fine Chemical Co., Ltd , a family enterprise of I-Like Industries Holdings Group, which was started in year 1997, has been a leader in the designing, manufacturing and marketing of sealants and aerosol products. Our sealants include but not limited to polyurethane (PU) sealants, PU foam (expanding foam), silicone sealants, RTV Gasket Maker, contact adhesive, etc; Our aerosol products include animal marker, line marking paints, party & Christmas fun items, and industrial-purpose products.

People are the base, customers are the first and the quality of the products is the life line to the entire company, providing better product quality and excellent service, as well as continuously driving the company toward a healthy development. While backed up with skilled workers, experienced engineers and well educated managers, we understand your needs and requirements and want to fulfill them for you. We have established close cooperation with research centers of several universities in China, and we have great R& D capability to help you to develop new items.

Upon quality control, led by ISO9001, we have set up correct quality view for the front line workers; responsible for customers as well as the future of the company; strive for zero complaints from customers. On hardware, we have brought in the advanced machine and equipment from Swiss, German and other countries. On the supply of raw material, we have assistance from excellent suppliers of the industry; hence we have built up a high efficient and reliable supplier chain. Under strict quality control, experienced worker complete the entire production process by using reliable advanced formula.

Our products have been introduced and well accepted in about 50 countries and regions. Our export markets cover countries in North and South America, Southeast Asia, the Middle East, South Africa, as well as in Europe. As international expansion is our main concern, we sincerely invite your esteemed company to promote our brands in your markets and share the benefits together. Upon interest, please contact us.