| Categories | Mine & Quarry Wire Mesh |
|---|---|
| Place of Origin: | Hengshui China |
| Certification: | iso,ce |
| Model Number: | crimped wire mesh |
| MOQ: | 1 piece |
| Packaging Details: | PALLET |
| Payment Terms: | L/C,TT |
| Supply Ability: | 1000rolls/5days |
| Brand Name: | XKh |
Wire Cloth Screen Edge Hook Clamping Strips |
Screens for classifying, sizing, straining, sieving, are typically
secured to a vibrating deck by clamping rails that apply tension
across the screening surface.
The tension is applied through edge treatments on the woven wire
cloth screen panel commonly referred to as "hooks" , "hook strips"
or "hooking strips".
Proper screen tension is crucial for effective screening and longer
screen life.Banded edges prevent flattening of hook edges and
eliminate mesh pull-out on fine wire mesh or high tension screens.
Plain Hooked Edge Without Reinforcing, Typically provided on screens of 5/16" and larger wire diameters. Edges are annealed before forming to eliminate cracking and breakage. | |||
| Inside Reinforced Formed Edge This hook strip is utilized for screens 5/16" and larger wire
diameters. Edges are annealed before forming to eliminate cracking
and breakage. | |||
| Reinforced Shroud Banded Edge Provided as standard on screens up to 1/4" wire diameter. Standard
shrouding is 16 gauge with other thickness' available on request. | |||
| Double Folded Reinforced Shroud Banded Edge This treatment eliminates screen pull-out on screens woven of
smaller wire diameters. Standard shrouding is 20 gauge with other
thickness' available on request. | |||
| Double Reinforced Shroud Banded Edge This treatment also eliminates screen pull-out on finer wire sizes.
It includes a internal metal insert for reinforcement. Standard
shrouding is 20 gauge with other thickness available on request. | |||
| End Tension Reinforced Shroud Banded Edge Specially reinforced to prevent pull-out under extreme screen
tensioning. Also available in Double Reinforced Style. | |||
| When ordering screen edge preparations, give vertical height of
hook (H) and angle of formed edge (A). Standard hook length (L) is 1". Standard hook height (H) is 3/4". Standard angle is 45� - 65�. |
|