CENTER DRUM FLEXO PRINTING MACHINE PLASTIC SHRINK FILM BOPP/PET/PE/NY/PP ADHESIVE THIN PAPER NON WOVEN FABRIC 40-120GSM

Note:
Optional:
1:Extra printing cylinder
2:Plate mounting machine
3:Ultrasonic anilox roller cleaning machine
4:Corona treatment
5:Water cooling device: connect to the center roller

6:Extra anilox rollers

Characteristic

1,The machine introduction & absorption of European technology / process manufacturing, supporting / full functional, has the following features:

2,After mounting the plate and registration, no longer need registration, improve yield;

3,Replacing 1 set of Plate Roller (unloaded 6pcs old roller, installed six new roller after tightening), only 20 Minute registration can be done by printing;

4,Maximum production machine speed up 200m/min, registration accuracy ±0.15mm.

5,The overlay accuracy does not change during lifting running speed up or down.

6,When machine stop, Tension can be maintained, the substrate is not deviation shift;

7,With precision structural, easy operation, easy maintenance, high degree of automation and so on, only one person can operate.

2. Suitable Printing Material:

2.1 Printing Material:

1. Plastic film: Shrink film, BOPP/PET/PE/NY/PP, ect.

2. Paper: adhesive paper/ thin paper, ect .no over 200gsm.

3. Non Woven Fabric: 40-120gsm

Suit to roll paper with good performance, it print continuously with beauty quality.

2.2 About Material:

1. Material width: MAX 1250mm

2. Printing effective width: MAX 1160mm

3. Diameter: MAXф800mm, Unwind and Rewind: 3″( by Air shaft)

Above material adopts: water-based ink, alcohol solvent environment protection ink, and photopolymer plate.

3. Printing Machine Style

Remark: Printing unit consist of : Printing plate cylinder,ceramic anilox roller,Enclosed chambered doctor blade,Double-way pneumatic ink pump for automatic ink supply cycle

4. Machine detailed configuration

4.1 double center unwinding system

• Tension control: adopt automatic tension controller 2pcs and magnetic brake 10kg;
• Automatic stop machine when break the material; When machine stop, keep tension and avoid the material loose or line deflection.
• EPC (edge position control) 2sets: Set and run four roll type automatically EPC ultrasonic detector system; With manually/automatically/ central return function, can adjust left and right around ±65mm width.
• Air shaft 3'

auto tension 2pcs, web guide 2pcs

4.2 Printing machine Unit

printing cylinders gear put outside, stable print

Electric motor control register 4directions: left and right; up and down

printing cylinder towards inside & out by linked shaft, control by handlewheel

4.3 Drying unit: electric heating, first hetaing then cooling before rewind.

• Hot air mode:

Electrical heating, transformed into circulating air heating by heat exchanger. Temperature control adopts intelligent temperature control, contactless solid-state relay, set 2 control, suit to different technology,environment production, save energy consumption, enforce PID temperature control and temperature control precision,±2℃

• Drying oven structure:

Drying oven inner container,heat exchanger,muzzle are all made of steel plate;

• Dry oven has independent fan for intake air and independent fan for air exhaust. By control the supply air rate and adjust air damper, the machine printing process will get the best wind speed,wind pressure, higher drying oven heat efficiency, and save energy consumption;

4. dryer on top, open and closed, control by pneumatic.

4.4 double center rewind

• Adopts automatic tension 2pcs and magnetic powder 10kg and clutch.
• Air shaft 3’’, 2pcs
• Pfaper core : 76mm (inner diameter)

• 4.5 PLC and image inspect system

  PLC CHINA FAMOUS INOVANCE BRAND

• 

• Image static monitoring system:CHINA KESAI BRANAD

• Display resolution: 1280*1024
• Display mode: Full screen
• Image capture interval: decided by PG encoder/ gear sensor position signal
• Camera check speed: 1.0m/min
• Check range: depends on the material width, arbitrarily setting. It is ok for adjustable point monitor or automatic back and forth.

• Enlargement factor: 3-30(Enlargement factor of area)

• 

• 4.6 Electronic control system

• 1 Group of main panel: Electrical cabinet designed and made as IP21 safeguard grade level;
• Total machine system controller by PLC touch screen, 10 inch Human-computer touch screen 1 set / modification data,run machine parameter monitor / record, also including online help,alarm hint,historical data;
• The machine tension system controller by the PLC control the human-computer touch screed display and setting; Keep tension when machine stop, automatic halt the machine when out of material;
• Total machine inching running, group control linkage; Home screen can imitate and show the condition of machine working process, Every power dot has working indication( Green light always on),Stopping indication(Red light always on),Failure indication(Red light twinkle);
• Temperature control unit has independent temperature control watch. It can monitor all fans working condition of dry oven, can warn,alarm(stop machine) function, and alarm remove after fault clearance;
• Operation control panel: Every device part set electronic control,air control,instrument,indicator light,switching button,master control and each operation surface can be independent controlled, and set multi-button emergency stop;
• Anti-explosion lighting lamp 4 Pcs
• 

Technical Parameter:

Ningbo Supreme Machinery Co.,Ltd is a modern enterprise specialized in complete sets of machinery for paper cup, label, decal paper sticker and some aulixilary machinery. Our company takes science and technology as the priority, continuously absorbs advanced technology at home and abroad, and develops a series of new products with unique structure, superior performance and excellent quality.

Our company aim at developing higher quality, higher effiency, more long life, energy saving, labor saving, material saving ect machinery. To be well-known at homen and abroad because of its high Cost-effective machinerys and after-sale service. We believe that 1:Trust comes from the precipitation of time. 2:Brand comes from word of mouth publicity.

We are looking forward to create a more bright future with all agent and clients at home and abroad