Long Life PE Forged Steel Ball Valve Reliable Pe Ball Valves For Gas

Long Life And Reliable PE-Forged-Steel Ball Valve

Description

PE-Forged- Steel Ball Valve is an important scientfic researching product of Kema. Its body is forged steel ball valve, and the end side
is PE. This plastic composite design to avoid long - term use of pure PE ball valve and the operating part due to the aging of the material
damage caused by switch failures and drawbacks, so it will not leak because of PE damage caused by aging. This valve is long life and
reliable.

According to the material grade, PE ball valves are divided into PE80 and PE 100. The company mainly produces PE80.
According to the function, it can be divided into conventional type, single release type and double release type.

Design Features

1. PE- Forged- -Steel ball valve overcomes the leakage problem of pure PE ball valve body due to material aging and operator and an extensionrod easily break or ater the long-tem action of running switch failure.

2. PE-Forged- Steel ball valve using a two- way sealing valve seat structure, compared to the cornventional PIFE valve seat,the sealing performance ismore reliable and fim and reliable.

3.PE- -Forged- Steel ball valve is fire safty valve: metal composite sealing valve seat, when the soft sealing material on the seat was bumed, the metal seat under the bttrly spring preload force will supply soft sealing space, pressing ball, forming metal to metal seal structure.

4.PE- -Forged- Steel ball valve is designed to stemthe anf -wear type fly inveted, set down with agasket seal structure, sealing effect increased with valve chamber pressure increasing. the valve stem sealing with an O- ring seal; valve opening and closing torque is smal, the stem is forged steel materia which has long lile and high strength.

5. Steel ball valve and PE pipe is threaded conncetions, external is fixed with metal sheath, sufficient to ensure its strength, the connection is more stable and reliable.

6.The installation of PE -Forged- Steel ball valve is very convenient, when at the factory, PE pipes and valves have been fully connected, when need to construct, simply by way of hot melt and fused connection with the pipe fusion.

7. PE- Forged- -Steel ball valve can be directly buried in the ground, without the construction of valve well, only need to build a shallow well; the construction is convenient, but relative to the full steel valves at less cost.

8. PE-Forged- Steel ball valve has smaller corrosion surface than the conventional ball valve. so its life is longer and more reliable.

9. PE- Forged- Steel ball valve's anti- -static effect is remarkable.It can avoid the metal ball to generate static electricity, so it is more secure and reliable.

10. PE- -Forged- Seel ball valve combined with the characterstics of ordinary flly welded ball valve and PE ball valve. Therefore, its performance is more stable and operation is more reliable, construction is more convenient and it is more low-cost.

Drawing of the PE-forged-steel ball valve​

When operating, operator needn't to enter the mine, simply tumto the oper ator in inoue, the operatoration is very secure and convenient.

PE steel plastic composite ballvalve

Luoke Valve (Chongqing) Co., Ltd. is headquartered in the beautiful mountain city - Chongqing, established in 2016, with the registered capital of CNY 25.8 million. It is a set design, production, manufacturing, sales, after-sales as one of the valve manufacturers, whose main development direction is independent research and development to manufacture high-end quality products. Now there are 124 employees:16 technicians of them are responsible for the design,technology,standard, etc.

The main products of the company are high and low pressure valves, including gate valve series, butterfly valve, globe valve, ball valve, check valve, plunger valve, plug valve, diaphragm valve, regulator valve, balance valve and hydraulic control valve, etc.

The driving device has manual, electric, pneumatic and other ways. The valve diameter is from 6mm to 4000mm, the pressure grade is from 0.1MPa to 32MPa, the valve operating temperature is -1960C≤11000C. The main material of the valve is copper, cast iron, carbon steel, alloy steel, stainless steel, ultra-low carbon stainless steel, titanium steel, high nickel alloy and Monel alloy, etc. The applicable medium is oil, water, steam, natural gas, acid and alkali solution, etc.

The products are widely used in municipal water supply and drainage, petrochemical industry, chemical fertilizer, iron and steel, power plant, oil field, city gas, construction, papermaking, fire protection and other industries.

In 2019, the company was listed as a qualified supplier of Chongqing Ganghua Gas. And its settled platforms including: China Power Equipment Information, National Energy E-Purchase, China Huadian Group e-commerce platform, China Resources E-commerce platform and other e-commerce platforms. There are 14 main partners, like Xiamen tungsten, Chongqing Avant-garde Technology Group Co., LTD., Shenhua Baotou Coal Chemical Industry, Sichuan Jiangyou Power Plant, JTG power plant, Hubei Hanchuan Electric Power Plant, etc.

Our company always cling to "Quality first, Customer first" as the work relief, constantly improve the service, and do everything possible to meet the customers’ demands with high quality products,prompt delivery and thoughtful service. We sincerely welcome customers at home and abroad to our company to negotiate business and seek for win-win cooperation.

Factory show