Categories | Hydraulic Oil Seal Kit |
---|---|
Brand Name: | WG CTP NOK SKF |
Model Number: | 5K2595 4K7463 Seal 4B4967 2B6005 5K2595 M-5K2595 WHEELED EXCAVATOR |
Certifiion: | ISO9001 |
Place of Origin: | CHINA |
MOQ: | 100 |
Price: | Negotiable |
Payment Terms: | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
Supply Ability: | 1000 |
Delivery Time: | Within 3-15 days after getting your desposit |
Packaging Details: | PP Bag Inside,Carton Box Outside |
Size: | Standard/Nonstandard Size |
Color: | green |
Material: | NBR |
Standard or nonstandard: | hydraulic pump or hydraulic motors oil seals |
Appliion: | Industry |
Product name: | Hydraulic PU Polyurethane Urethane Oil Wiper Piston Seal |
5K2595 4K7463 Seal 4B4967 2B6005 5K2595 M-5K2595 WHEELED EXCAVATOR
Aftermarket replacement 5K2595 Seal - Oil
Generic P009278, 4B4967, 2B6005, 5K2595, M-5K2595, Seal - Oil, ,
Seal, Oil 5K2595,
4I7463 Gear Sun Fits 322B L 322B LN 325B L 325B LN 350 350 L M325B
Every attempt is made to provide accurate, up-to-date information.
By the use of this document, you agree that Inc. is not responsible
for errors or omissions.
The information provided are the latest recommendations for the
diesel engines that are covered by this Special Publiion. This
information supersedes all previous recommendations which have been
published for the diesel engines that are covered by this Special
Publiion. Special fluids are required for some engines and
continued will be necessary. Refer to the applicable Operation and
Maintenance Manual.This publiion is a supplement to the Operation
and Maintenance Manual. This publiion does not replace the engine
Operation and Maintenance Manuals.
These recommendations are subject to change without notice. Consult
your local dealer for the most up to date recommendations.
In order to avoid potential damage to your machine and/or engine,
only purchase fluids and filters through your dealer or authorized
outlets. For a list of authorized parts outlets in your area,
consult your dealer.If you purchase what appear to be fluids and/or
filters through other outlets/sources, you are at a very high risk
of purchasing counterfeit ("look-alike") products.Counterfeit or
"look-alike" products may visually appear the same as the original
product, but the product performance and internal quality will
typically be very low.Counterfeit or "look-alike" products have a
very high likelihood of causing and/or allowing engine and/or
machine compartment damage.
Follow all industry standard safety practices when operating
engines and/or machines and when performing all recommended and/or
required maintenance.Note: Instructions for the installation of the
filter are printed on the side of each spin-on filter. For non-
filters, refer to the installation instructions that are provided
by the supplier of the filter.
In order to meet expected fuel system component life, 4 micron(c)
absolute or less secondary fuel filtration is required for all
diesel engines that are equipped with common-rail fuel systems.
Also, 4 micron(c) absolute or less secondary fuel filtration is
required for all diesel engines that are equipped with unit
injected fuel systems. For all other diesel engines (mostly older
engines with pump, line and nozzle type fuel systems), the use of 4
micron(c) absolute or less secondary fuel filtration is strongly
recommended. Note that all current diesel engines are factory
equipped with Advanced Efficiency 4 micron(c) absolute fuel
filters.In order to obtain additional information on designed and
produced filtration products, refer to the "Reference Material"
article, "Filters" and "Miscellaneous" topics in this Special
Publiion. Consult your dealer for assistance with filtration
recommendations for your machine.
does not warrant the quality or performance of non- fluids and
filters.
General Recommendations and Guidelines
Follow all applicable industry standards and all applicable
governmental, environmental, and safety guidelines, practices,
regulations, and mandates.Note: These general recommendations and
guidelines concerning maintenance and care of fuel and fuel storage
systems are not intended to be all inclusive. Discuss proper fuel
safety and health, handling, and maintenance practices with your
fuel
Illustration 1 g02558079
Table 1
Specifiion for the 283-6414 Air Shutoff Gp and 185-1676 Air Shutoff
Gp
Item Qty Part Specifiion Description
1 2 5N-3852 Bearing Distance of bearing installation below the
surface of the elbow is 0.25 0.25 mm (0.010 0.010 inch).
The bore in the elbow for the bearings is 18.263 0.013 mm (0.7190
0.0005 inch).
2 1 4P-8021 Valve As The valve assembly is shown in the run (open)
position. When the valve is closed, a 0.08 mm (0.003 inch) feeler
gauge must not fit between the valve and the bore in the pipe at
any point.
3 1 5N-2830 Shaft As Diameter of shaft is 15.800 0.025 mm (0.6221
0.0010 inch).
Bore in the bearing is 15.88 mm (0.625 inch).
4 1 5H-1190 Lip Type Seal Lightly lubrie the shaft with glycerin or
approved equivalent.
5 1 3N-7848 Spring Length under test force is 22.9 mm (0.90 inch).
Test force is 4.4 N (1.0 lb)
Free length after test is 35.56 mm (1.400 inch)
6 1 5N-5129 Shaft As needed, adjust the shaft to change the spring
tension until the hold in current consumption (draw) is less than 2
amp at shutdown.
Diameter of shaft is 9.60 0.03 mm (0.378 0.001 inch).
Bore in the bearing is 9.80 0.03 mm (0.386 0.001 inch).
7 1 108-2858 Spring Free length is 54.5 0.5 mm (2.15 0.02 inch)
8 1 5N-5664 Bracket As Bracket assembly must be adjusted so that
the valve assembly is parallel to the pipe bore within 2 degrees in
run position.
9 1 4N-3889 Shutoff Solenoid Voltage rating is 9.0 to 14.4 VDC.
Current consumption in pull-in windings at 14.4 VDC is 53.7 amp.
Current consumption in hold-in windings at 14.4 VDC is 1.22 amp.
Distance from the plunger face to the flange face after the
solenoid has been energized is 8.0 0.5 mm (0.32 0.02 inch).
10 1 1W-9070 Diode The diode assembly is required to suppress the
back voltage spike that is generated when the solenoid is turned
off.