Home > Agriculture Machinery & Equipment >

Heat Treatment Pipe Fitting Dies To Pushing Carbon Steel Alloy Hot Forming Elbow

Categories Pipe Fitting Mould
Brand Name: Heiyan
Model Number: 1/2-48 inch
Certification: ISO,CE,SGS,BV
Place of Origin: Cangzhou,Hebei,China
MOQ: 1 set
Price: USD 50 to 1000 per Set
Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Supply Ability: 100 set per month
Delivery Time: 10-30 days
Packaging Details: Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow pack by wooden case
Product Name: Pipe Fitting Mould Die to pushing carbon steel alloy hot forming elbow
Material: 2520 ,2014, 304,45# steel ,40# steel,35# steel
Making Method: casting ,forging
Process: heat treatment
Pipe Fitting Mould Die to pushing carbon steel alloy hot forming elbow Color: Customization
Sand casting type: chemically hardened sand
  • Product Details
  • Company Profile

Heat Treatment Pipe Fitting Dies To Pushing Carbon Steel Alloy Hot Forming Elbow

Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow


Product Description

We Supply Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow and all kinds of corresponding molds and dies for all our Pipe fittings Machine. The mandrel and corresponding induction coil for elbow forming machine. The mandrel is mainly engineered from 18-8, 2520, K18, stainless steel and alloy steel. It allows for production of pipe elbows with diameter between 21 and 1,620mm, curvature radius of 1D-3D, and wall thickness of 5-80 mm.
The mandrel for Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow comes with an ox horn shape, and is necessary during the hot forming process. Due to the special shape design, it enables diameter expanding while creating the bending.


When the pipe section passes through the mandrel, the mandrel will be hold firmly via a holding mechanism.Then, a trolley, which may be hydraulically driven or mechanically driven via leadscrews, will be available to push the pipe section to move along the mandrel.Outside the mandrel, there is an induction coil which serves to heat the pipe section. After thorough heating, the trolley further pushes the pipe section to unload it, and thus a pipe elbow is created.Elbow sizing dies are specialised in sizing the dimension of the elbows after its first hot forming, the specification of the dies could be up to 2 metes in diameter, and it could also be manufactured based on the customised requirement and sketch.


Alloy mandrel mould and Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow for elbow hot forming.The utility model relates to an industrial forming mold for motor coil down lead lug, which belongs to the motor production, in particular to an universal elbow mold for motor coil coil down lead lug.

Tube , pipe fitting choice of hot-melt or bend, pipe fittings and hot-melt die.

The elbow shaping mold is made, and the upper and lower concave molds of the mold are made by standard symmetrical elbow products along the center plane of the elbow circle.

There is an approximately equal relationship between the inner diameter at the elbow groove of the mold and the outer diameter at the bevel of the shaping elbow.

The upper and lower die are welded to the support frame made of steel plate. The support frame is a box body welded with steel plates, which is mainly welded by the top plate, side plates and support plates.

A certain number of support plates are arranged in the middle of the box to radiate uniformly with the center of rotation of the upper and lower die. The semi-circular grooves and upper and lower die bends that are cut out in the middle of the support plate and match the outer diameters of the upper and lower die dies. Group welding of the outer surface of the head. The periphery of the support plate is welded to the top plate of the box.

The overall structure of the mold and Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow is stable and rigid, and the force transmission is evenly distributed. The process is simple, the cost is low, and the production cycle is short. You can also order any other models. Material. Bend mandrel

The main products include Φ108-Φ1420 thermal expansion steel pipe core rod, Φ18-Φ1219 push elbow core rod, Φ219-Φ2020 steel butt welding elbow mold, Φ18-Φ914 elbow mold (elbow core rod), Φ219-Φ1219 Pressure tee mold, Φ25-Φ1219 reducer pipe mold, Φ159-Φ630 cold push stainless steel mold. The main raw materials for production are stainless steel scrap, carbon steel scrap, non-ferrous metals and other auxiliary materials.


Parts Specifications of Our Pipe Expanding and Pipe Fitiings Mould
Material2520 ,2014, 304,45# steel ,40# steel,47# steel
Size27mm ,33mm ,42mm ,48mm ,60mm,73mm,89mm ,102mm ,114mm,141mm ,168mm,219mm,273mm,324mm,356mm ,406mm ,457mm ,508mm ,559mm ,610mm ,660mm ,711mm ,762mm,813mm ,864mm ,914mm ,926mm ,1016mm ,1067mm ,1118mm ,1168mm ,1219mm
Pipe Fitiings Mould TypeElbow Mould Die ,Tee Mould Die ,Cap Mould Die, Reducer Mould Die ,Pipe expanding Mould Die

Our Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow and elbow mandrel head materials are generally ZG1Cr18Ni9Ti, ZG3Cr20Ni14, ZG1Cr25Ni20Si2, ZG0Cr20Ni25, etc., the high temperature strength and wear resistance have gradually increased, and the price has also increased accordingly.

Pushed elbow mandrel head is divided into single curvature, double curvature and multiple curvature according to the radius of curvature.

For single-curvature, double-curvature, and multi-curvature mandrels, the thrust force is gradually reduced, and the production cost is gradually increased. According to the cross-sectional shape, it is divided into two types: circular cross section and elliptical cross section. The circular cross section is simple to make and the cost is low, but the ellipticity and thinning rate of the elbow are too large. Different, the ellipse and thinning rate of the push elbow are small.

Heiyan chose a mandrel with an oval cross section. According to whether or not there is a shaping section, it is divided into a mandrel head with a shaping section and a mandrel head without a shaping section. The Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow mandrel with shaped section is complicated to manufacture, high cost and long use time; the mandrel without shaped section is simple to manufacture and low cost.


And the mandrel and Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow material used in our factory has the characteristics of wear resistance, bending resistance and strong impact resistance, and the surface is bright and clean, suitable for the extrusion of copper, iron, aluminum, zinc, stainless steel and other metals.


Advantage of Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow are as follows:


*High hardness and abrasion resistance surpasses the die steel, and does not strain the surface of the machined part.
*Compared with steel molds, it has good thermal conductivity and does not stick to molds, which can ensure uniform mold *temperature distribution during work, will not cause mold cracks due to local high temperature, and will not cause cold sweat, *exfoliation, and wrinkles in stretched products. phenomenon.
*Economic and practical, long life of core rod material.
*The core rod material processing technology is simple. Compared with steel molds, no direct heat treatment is required for direct polishing. Therefore, the heat treatment cost is reduced, the mold processing time is shortened, and the number of stretching times can be reduced and the cost of the mold can be reduced.

2 mandrel show of Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming ElbowMould Show 2 Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow

The Packing of Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow:
Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow packing

Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow Basic Introduction:


HY Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow is a kind of mandrel used for pipe expansion and extubation, and a mandrel mold that promotes the forming of steel pipes.


The hot-expanded steel pipe forming process uses a special pipe expanding machine, a core mold (commonly known as a mandrel) and a heating device (commonly known as a heating coil), so that the blank set on the mold is moved forward by the pusher, and is moved during the movement. Process of heating and expanding. The diameter of the used pipe is smaller than the diameter of the pipe to be obtained. The deformation process of the blank is controlled by the core mold, so that the compressed metal at the inner arc flows to compensate for other parts that are thinned due to the diameter expansion, so that the wall thickness is uniform. Heat expanded steel pipe.


The main products except our Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow include Φ108-Φ1420 thermal expansion steel pipe core rod, Φ18-Φ1219 push elbow core rod, Φ219-Φ2020 steel butt welding elbow mold, Φ18-Φ914 elbow mold (elbow core rod), Φ219-Φ1219 Pressure tee mold, Φ25-Φ1219 reducer pipe mold, Φ159-Φ630 cold push stainless steel mold. The main raw materials for production are stainless steel scrap, carbon steel scrap, non-ferrous metals and other auxiliary materials. The push elbow mandrel is a kind of mandrel for push elbow forming, which can be used to expand the diameter at high temperature to push out large diameter carbon steel, alloy steel and non-ferrous metals with certain curvature Sew elbows or bends. This Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow mandrel was originally easy to obtain, low in cost, fast in heating, not easy to break, and long in life, saving energy. This mandrel can be used for one-time diameter expansion and molding, with good output quality, and no manual shaping is required.
HY tube expanding Pipe Fitting Mould Die to Pushing Carbon Steel Alloy Hot Forming Elbow mandrel is a mold installed on the tube expanding pusher. This core mold (commonly known as mandrel) and heating device (commonly known as heating coil) are used to make the blank set on the mold pushed by the pusher. Downward movement, the process of being heated and expanded during the movement. The diameter of the used pipe is smaller than the diameter of the pipe to be obtained. The deformation process of the blank is controlled by the core mold, so that the compressed metal at the inner arc flows to compensate for other parts that are thinned due to the diameter expansion, so as to obtain uniform wall thickness Heat expanded steel pipe.

Cheap Heat Treatment Pipe Fitting Dies To Pushing Carbon Steel Alloy Hot Forming Elbow for sale
Send your message to this supplier
 
*From:
*To: SHEAN (CANGZHOU) CORP LTD
*Subject:
*Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0
Company Info
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly