6KW Ultrasonic Battery Welder For Copper Wire 0.7Mpa Gas Source

Ultrasonic Copper Aluminum Metal Wire Harness Spot Welding Machine For Cable Terminal Battery Solar Splicing Welding

20KHz 2KW 3KW Ultrasonic Copper Wire Harness Spot Welding Machine for metal cable Soldering assembling is a Sonic metal welding which is the use of high-frequency vibration wave to the two metal surface to be welded, in the case of pressure, so that the two metal surfaces friction between the formation of molecular layer between the fusion, the advantage is fast, energy saving, fusion High strength, good conductivity, no spark, close to the cold state processing; the disadvantage is that the welding of metal parts can not be too thick (generally less than or equal to 5mm), the solder bit can not be too large, need pressure.

Welding advantages

1. welding materials are not melting, not fragile metal characteristics.

2. after welding good conductivity, resistance coefficient is very low or almost zero.

3. the welding metal surface requirements are low, oxidation or plating can be welded.

4. welding time is short, without any flux, gas, solder.

5. welding without spark, environmental safety.

Ultrasonic metal welding machine Applicable products

1. nickel-metal hydride batteries Ni-MH battery nickel mesh and nickel-chip mutual melting and nickel film mutual melting. The

2. lithium batteries, polymer batteries and nickel foil copper foil mutual melting, aluminum foil and aluminum mutual melting.

3. wire mutual melting, partial knot with a number of mutual melting.

4. wire and the name of electronic components, contacts, connectors melting each other.

5. the name of household appliances, automotive supplies of large heat sink, heat exchange fins, honeycomb heart of the mutual melting.

6. electromagnetic switch, no fuse switch and other high current contacts, dissimilar metal sheet of mutual melting.

7. the metal pipe of the tail, cut off water, airtight.

Main Specifications

GUANGDONG XWELL TECHNOLOGY CO., LTD. is a high-tech enterprise specializing in intelligent equipment design, production and sales, providing mechanical engineering technology design and consulting services, electronic engineering design and consulting services. XWELL's core team was established in 2010 and officially established in June 2014. XWELL relies on South China University of Technology(SCUT), and the core team is composed of several doctors and masters from SCUT.

XWELL's main products are battery production line machines, such as spot welding machine, battery sorting machine, battery sticking machine, battery capacity grading machine, battery charge and discharge aging machine, battery general testing machine, and so on. The main application areas are new energy lithium batteries, automobiles and other industries, Especially in the fields of new energy, automotive wiring welding and other fields, XWELL has accumulated rich engineering experience and mastered a full set of core technologies, and can provide customers with a complete set of services from technology to equipment, helping customers to establish efficient and reliable production lines in the shortest time .