Chemical Industry ASTM B363 16" Grade 2 Pressure Vessel Sealing Use
Seamless Titanium Head
The head is the end cover on the pressure vessel, which is a main
pressure bearing component of the pressure vessel.The function that
plays is sealing function.One is to make the bottom and bottom of
the can-shaped pressure vessel, and the other is that the pipe has
reached its end and is not going to extend any further, so a head
is used to seal the pipe in the form of welding.
Similar to the function of the head are the blind plate and the
cap, but these two products can be removed.The head can not be
disassembled after welding.
Our country existing standard of head, is according to the
structure (oval, dish and cone), forming, stamping, spinning, and
respectively, which not only cause different standard head quality
requirement is not completely consistent with the unreasonable
phenomenon, but also to the revision of the standard selection of
head, bring certain difficulties.
YIXIN titanium with traceability, strict process control and
finished products inspection will guarante the quality of products
|Titanium material grade||Gr2|