Home > Plastic Stocks >

Platinum Cure Silicone For Candle & Soap

Categories Platinum Cure Silicone Rubber
Model Number: MCPLA-1025
Certification: MSDS , SGS, Reach
Place of Origin: China
MOQ: 240
Price: Negotiation
Payment Terms: L/C, , T/T, Western Union, PayPal , MoneyGram
Supply Ability: 8000kgs/day
Delivery Time: 5-10 working days
Packaging Details: 1kg/can , 5kg/can , 10kg/drum , 20kg/drum , 25kg/drum , 200kg/drum
Color: Translucent
Mixing ratio: 1:1
Hardness: 25 shore a
Working time: 45 mins
Method of molding: pourable silicone
Tear Strength: 4MPA
Tensile Strength: 28N/mm
Shrinkage: 0.1%
  • Product Details
  • Company Profile

Platinum Cure Silicone For Candle & Soap

Good Flowability Fast Curing Low Shrinkage RTV-2 A B Liquid Platinum Cure Silicone Rubber For Making Candle Soap Molds


Platinum cure silicone rubber is a two-component material consisting of silicone base, which when mixed with curing agent,cures at room temperature by an addition reaction. A range of materials can be cast into the cured silicone mold: polyurethane and other reactive resins are the materials typically used.

Features of rtv-2 liquid platinum cure silicone rubber
Odorless, environmental friendly, and food grade platinum liquid silicone
Color can be translucent, transparent, white, any colors
The mixing ratio is 1:1
High temperature 150~220℃
Resistance to deformation
Low shrinkage

Factory Supplying low viscosity rtv-2 liquid silicone rubber No shrinkage silicone liquid silicone


1.Production of flexible moulds with excellent details reproduction, mechanical resistance and duration.
2.Production of thermal expansion formers for composite materials (the aeronautic industry, boat-building, etc.).
3.Production of moulds intended for moulding objects in chocolate, sugar, marzipan and for producing decorative sugar, pieces of bakery, biscuits and confectionery products.

Technical datasheet

Model#Mix ratio


shore A



Pot lifeCuring time












Processing and recommendations

Preparation...Safety - Use in a properly ventilated area (“room size” ventilation). Wear safety glasses, long sleeves and
rubber gloves to minimize contamination risk. Wear vinyl gloves only. Latex gloves will inhibit the cure of the rubber. Store and
use material at room temperature (73°F/23°C). Warmer temperatures will drastically reduce working time and cure time. Storing
material at warmer temperatures will also reduce the usable shelf life of unused material. Mixing containers should have straight
sides and a flat bottom. Mixing sticks should be flat and stiff with defined edges for scraping the sides and bottom of your mixing
container. These products have a limited shelf life and should be used as soon as possible.

Cure Inhibition - Addition cured silicone rubber may be inhibited by certain contaminants in or on the pattern to be molded
resulting in tackiness at the pattern interface or a total lack of cure throughout the mold. Latex, sulfur clays, certain wood surfaces,
newly cast polyester, epoxy, tin cure silicone rubber or urethane rubber may cause inhibition. If compatibility between the rubber
and the surface is a concern, a small-scale test is recommended. Apply a small amount of rubber onto a non-critical area of the
pattern. Inhibition has occurred if the rubber is gummy or uncured after the recommended cure time has passed. To prevent
inhibition, one or more coatings of a clear acrylic lacquer applied to the model surface is usually effective. Allow any sealer to
thoroughly dry before applying rubber.

NOTE: Even with a sealer, platinum cure silicones will not cure against surfaces containing sulfur. If you are not sure if your clay
contains sulfur, do a small compatibility test before using for an important project.

Applying A Release Agent - Although not usually necessary, a release agent will make demolding easier when casting into
most surfaces.

Tips of Mold Performance & Storage
The physical life of the mold depends on how you use it (materials cast, frequency, etc.). Casting abrasive materials such as concrete can quickly erode mold detail, while casting non-abrasive materials (wax) will not affect mold detail. Before storing, the mold should be cleaned with a soap solution and wiped fully dry. Two part (or more) molds should be assembled. Molds should be stored on a level surface in a cool, dry environment.

Packing size

Why Choose MC Silicone

Our Services

1- We have experience in silicone field more than 10 years
2- We have different types of silicone with hardness from 0-60 shore A
3- We have different mix ratio, Catalyst can be colored as per client request
4- We offer silicone mold making technical support and develop new products
5- We offer sample for testing before ordering
6- We can customize logo as per clients’ request and help clients sourcing other related products

Quality Control of RTV2 liquid silicone rubber:

Storage and Shelf life

Twelve (12) months from the data of production when stored at below 22~24℃ in original containers

Cheap Platinum Cure Silicone For Candle & Soap for sale
Send your message to this supplier
Characters Remaining: (0/3000)
You may also be interested in :
Inquiry Cart 0
Company Info
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly