|Categories||Pneumatic Control Valve|
|Model Number:||Pneumatic valve|
|Place of Origin:||China|
|Type:||Pneumatic Diaphragm Control Valve|
|Suitable medium:||Petroleum, chemical industry,water, gas, oil ect|
|Working temperature:||-45 to 200 Celsius|
|Body/Disc:||Cast Iron(CI): GG25,Ductile Iron|
|Temperature of Media:||Low Temperature|
|Temperature of Me:||Zinc Plated Carbon Steel, Stainless Steel,|
Actuator Diaphragm Control Valve With Positioner Pneumatic 3-Way Flange Valve
Pneumatic 3-way ball valve can be divided into L type and T type. L type 3-way ball valve is used for switching the flow direction of media and making two orthogonal passages connected. Four-seat 3-way ball valve has features including artistic appearance
Body material: SS316/SS304
Actuator material: SS304
Disc seal: PTFE/FPM
Stem seal: PTFE/FPM
Piston seal: FPM/NBR
Connection size: DN10-DN80
Thread: 3/8" - 3"
Applicable Medium: Water, Neutral gas or liquid, alcohol, oil, organic solvent, steam
Temperature of Medium: PTFE: -10℃ - +180℃, FPM: 10℃ - +100℃
Viscidity: Max 600mm³/s
Downstream installing / Upstream installing
Controlling medium: air/neutral gas
Controlling pressure: 0.3 - 0.8Mpa
Working pressure: 0-1.6Mpa
|Size Range||3/4"~12", DN20~300|
|Acting Mode||Multi-Spring diaphragm type|
|Working Pressure||1.6, 4.0, 6.4MPa|
|Air Supply Pressure||0.14, 0.16, 0.28, 0.4MPa|
|Lifespan||1,000,000 (1 Million) Times|
|Body Material||SS304, SS316, SS316L, WCB|
|Number of Ways||2 Way|
|Applicable Media||Control of Water, Air, Gas, Oil, Liquid, Steam, etc|
|Optional Accessories||Namur Solenoid Valve, Limit Switch, F.R.L, Position Indicator, Manual Device|
|Application||Food & Beverage, Water & Wastewater, Ultra Pure Water, Desalination, Chemical, Textile, Pharmaceutical, Pulp & Paper|
Pneumatic 3-way ball valve can be divided into L type and T type. L type 3-way ball valve is used for switching the flow direction of media and making two orthogonal passages connected. Four-seat 3-way ball valve has features including artistic appearance and compact and reasonable structure. It can not only switch the flow direction of media, but also connect three passages, or close one passage while making the other two passages connected. Thus, it can control the convergence and diversion of the media in pipe flexibly.
1. Pneumatic 3-way flange ball valve adopts an integrated
structure, seal type of four valve seats and less flange
connection, ensuring high reliability and light weight.
2. Pneumatic 3-way ball valve spool is divided into T type and L type, with long service life, large flow capacity and small resistance.
3. The ball valve can be divided into single-acting and double-acting type. The single-acting type has the feature that once the power source has fault, the ball valve will be under a state required by the control system.
A pneumatic valve for use in laminated plastic microfluidic structures. This zero or low dead volume valve allows flow through microfluidic channels for use in mixing, dilution, particulate suspension and other techniques necessary for flow control in analytical devices.
TOBO STEEL GROUP CHINA
Your Enquiry has been sent successfully