Anti Static 32 Layer Clean Room Sticky Floor Mats IOS9001

anti static clean room sticky floor mats

Product description

Sticky mat actual there are 32 layer, there are 30 layer left or lower right corner has 1 to 20 or 30 to 1, in order to change, the first layer is no plastic transparent PE film + 29 layer coating PE film (usually blue or white, other colorcan be customized) + 1 layer coating double sky-blue PE protection compound and into, double the mask of the first layer is the sky blue, with 30 or above 1 digital label, without glue layer 2 is transparent PE film and glue layer PE film on each floor with 1-29 or 29-1 digital label.

Cleanroom sticky floor mats is a self-adhesive dust-removing product formed by the multi-layer Low Density Polyethylene Film materials.
Cleanroom sticky floor mats has super viscidity .Each layer is attached with a high viscosity coating, smooth and durable, can quickly and effectively remove dirt, dust to keep the working environment clean.

Apecification field for cleanroom sticky mats

1. Semiconductor industry

2. Electronics industry

3. Biological medicine

4. Aerospace

5. Hospital operating room

6. Food processing industry

7. High-end hotel

8. Hotel or family, etc

Detailed parameters for cleanroom sticky mats

The base materia	35 ~ 50 mu m thick coating PE
The gluing thickness	5～7μm
The layer number of the product	30 / piece
The thickness of the product	1.55～1.8 mm/
Product color	Blue or white
Dedusting effect	99.9%
180 degree stripping strength	300g-350g / 25mm (gb2792-98) viscosity increases or decreases
At the beginning of viscous fluid	> 50mm (gb4852-2002 stickiness test method, ball bearing method)
A viscous	1440(24h)(GB4851-98)
Product specification	18″×36″,24″×36″ ,24″×45″,26″×45″
Remark: the specification can be made according to customer's requirement.

Usage for cleanroom sticky mats

This product is composed of 30 layers of PE film, with 1-30 # in the lower left corner of each layer for replacement. When using, first remove the protective layer from the opening at the back of the surface, and then place the flat surface on the clean and non-watermark floor. And along the edge of emulsion with sole pressing, and then from the positive opening off protective layer, so you can use, if you use in the process of the surface of the film adhesive is full of dust, just scraped through opening this layer, so that you can use the next layer of the pure film.

Suzhou Qiangsheng Clean Technology Co.,Ltd specialized in producing cleanroom wiper and ESD products ,we have over 8 years experience in this field.

Qiangsheng focuses on providing total solution of reliable ESD control/ clean room contamination control for high technology customer in the field. It has strong technical advantage in the industry and has gotten ISO9001 quality system and ISO14001 environment system certification.

Company products include: wipers/clean suits, anti-static fabrics, clothing/ safety shoes, anti-static shoes, clean shoes/ face masks used in cleanroom, purifying masks, activated carbon masks, ordinary facemasks/sticky mats, anti-static gloves/clean room ion blower, on-line electrostatic monitor, and other spare parts for clean room and ESD protection.

Qiangsheng Products are widely used in hard disk drive, semiconductor, display, communications equipment, biological pharmacy, hospital, automobile manufacturing, aerospace and petrochemical industry, etc. At the same time of meeting the demand of domestic market, they are exported to the United States, Britain, Germany, Japan, Korea, Portugal, the Middle East countries, Hong Kong/Macao/Taiwan and other regions.

Introduction of our workshops : 

Weaving workshop of cleanroom wiper , we could offer wipers from 80g to 220 g/m2, also can cusomized by your request .

Garment workshop:

Cleanroom wiper workshop, we have class 10 and 100 cleanroom , we can let your world be free of dust , improve the quality of your products .