Home > LED Encapsulation Series >

SMD 2835 High Power Ir Led Chip 120 Degree Viewing Angle For Night Vision

Categories SMD IR LED
Brand Name: Yuanke
Model Number: YK2835IR83002
Certification: CE.SGS.ROHS
Place of Origin: SHENZHEN
Price: Please inquiry
Payment Terms: T/T, Western Union,Paypal
Supply Ability: 8KK/Days
Delivery Time: 5-7 work days
Packaging Details: 4000pcs/Reel our product package size is 25x23CM, and is the use of aluminum vacuum packaging. And different types of containers, small cartons can be installed about 100K products. Large box can hold about 500K.
Chip Material: InGaN
Emitting Color: Infrared 830nm
Luminous Intensity: Customers' Requirements
Luminous Flux(lm): 20-30mw
Power: 0.2W
Viewing Angle(°): 120 Degree
Color rendering index: null
Color Temperature: 830nm
Operating Temperature: -20 - 85
Chip Brand: Epistar chip, Sanan chip,Epileds chip
Current: 60mA
Voltage: 1.4-1.7V
Warranty: 2 years
Lifespan: 50000-100000H
  • Product Details
  • Company Profile

SMD 2835 High Power Ir Led Chip 120 Degree Viewing Angle For Night Vision

SMD 2835 LED IR chip 830nm 0.2w infrared 940nm epistar Epileds for Night vision


  • Package in 8mm tape on 7" diameter reels.
  • Built in 1 LED chip.
  • Wide viewing angle.
  • Soldering methods: Reflow Soldering.
  • High performance.
  • The product itself will remain within RoHS compliant Version.


  • The 2835 IR 830NM Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
  • Besides, lightweight makes them ideal for miniature applications. etc.


  • PCB mounted infrared sensor.
  • Infrared emitting for miniature light barrier.
  • Floppy disk drive.
  • Optoelectronic switch.

Package Dimension:

Product Type:YK2835IR73002
Absolute maximum ratings (Ta=25°C)
Forward current
Reverse voltageVr5V
Power dissipationPd200mW
Operating temperature rangeTop-25~+80°C
Storage temperature rangeTstg-30~+85°C
Peak pulsing current(1/8 duty f=1KHz)Ifp80mA
Junction TemperatureTj115℃/W
Electrostatic Discharge(HBM)ESD1000V
Electro-Optical characteristics (TA=25°C)







Color Temperature


Forward voltage


Total Radiated Power


Viewing angle at 50% IV


Dominant wavelength


Reverse current


Color Rendering Index


Please read the following notes before using the datasheets:

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change (Burn out will happen).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 The LEDs should be used within a year.

2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.

2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

2.6 If the moisture adsorbent material (silica gel) has fabled away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment: 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile.

1.9mm Height Top View 3528 Infrared Emitting Diode , Infrared Chip LED 850nm

3.2 Reflow soldering should not be done more than two times.

3.3 When soldering, do not put stress on the LEDs during heating.

3.4 After soldering, do not warp the circuit board.

4. Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 260℃ for 5 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder.

5. Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing.

1.9mm Height Top View 3528 Infrared Emitting Diode , Infrared Chip LED 850nm

6. Caution in ESD

Static Electricity and surge damages the LED. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED. All devices, equipment and machinery must be properly grounded.

Reel Dimensions:
0.80mm Height Top View White LED SMD Chip Promotion 3014 6000 -7500K

Carrier Tape Dimensions:
Loaded quantity 4000 PCS Per reel.

We provide EMS DHL UPS FedEx TNT that several different types of express allows you to select, under normal circumstances, the transport time is in 5 to 10 days or so, if large cargo, go shipping, so time is longer, but safer, and the freight is lower.

Application field

Are widely used in the LED lamp, LED bulb light, LED panel light, LED ceiling lamp, LED street light, LED lamp, miner's lamp, stage light, flashlight, lighting, lamp lighting lamps and lanterns, as well as outdoor billboards, such as electronic display, traffic lights, signs, car tail lights, LED modules, LCD back light, LED lighting lighting, LED soft/hard light bar, etc., is the better choice to replace traditional lighting light source.




Infrared light emitting diode

Product Tags:

high power infrared led


ir power led

Cheap SMD 2835 High Power Ir Led Chip 120 Degree Viewing Angle For Night Vision for sale
Send your message to this supplier
To: Shenzhen Yuanke electronic Co..Ltd
Characters Remaining: (0/3000)
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    More from this Supplier
    Contact Us Quickly