Food Grade Nipple Liquid Silicone Rubber RH6250 - 50 ISO9001:2016
for Baby Supplies High Rebound
N RH6250 - 50 two-component liquid silicone rubber is a kind of
It can be used for mold making for adult toys, artificial
prosthesis, fake human breast, making soft silicone rubber products
like baby teethers, baby spoons, baby hats, etc.
|N RH6250 - 50|
|Unit||Part - A||Part - B|
|Shore A hardness||A||50±2|
|Tensile strength||Mpa||≥ 9.0|
|Tear strength||KN / m||≥ 30|
|Linear shrinkage rate||%||≤ 0.1|
These figures are for reference only, please contact us for
Typical properties of the vulcanisate:
The mixing ratio of components A: B = 1: 1.
Vulcanisation: 5 min. 150 °C + 4 hrs. 200 °C post cure
Key Features and Benefits
Vulcanisates consisting of N RH6250 - 50 LSR are distinguished by
the following properties:
- High thermal stability
- Neutral odor and taste
- High recovery after a puncture
- Sterilizable with ethylene oxide, steam and gamma radiation
- Excellent biocompatibility
- Good transparency
- Easy pigmentable with the LSR Colour Pastes
- High stability to ozone and ultraviolet light
Rui - He® RH6250 - 50 are mainly used for breast enhancer, silicone
mask, ultra-realistic replicas of the face, silicone baby spoons,
silicone animatronic skin, silicone baby mat, silicone baby doll, fruits feeding baby bag, teether, washbasin, ring teethers,
handmade chew charms, pacifier clip, etc.
|RUI-HE® RH6250-10 Liquid silicone rubber obtained the following
Packaging & Storage
- RH6250 - 50 Medical is available in 20kgs pails or 200kgs drums.
- Store in a cool dry place out of direct sunlight, use it within 12
months from the day of manufacture.
This product cannot be contacted with compounds containing N, P, S
to avoid affecting the catalytic effect of platinum.
1. Quality assurance of raw materials
Our silica gel is made of imported raw materials(include Dow
Corning, Wacker, and Shinetsu cooperation partner), and the
produced silica gel has a bright feeling.
However, the fake colloids on the market are faintly covered with
particulate impurities, and the grinding process is not carried out
during the production process or impurities are present in the raw
2. The delicate degree of silicone rubber
Good quality colloids are fine and free of impurities. They are
rubbed with fingers and rubbed against the silica gel. There are no
granules or floating objects.
3. Good fluidity and good leveling
The better the fluidity of the liquid silicone gel, the less likely
it is to generate bubbles during the filling operation, so the
quality of the silicone mold or product made is better and more
If you need to know the prices of our silicone rubbers, please
contact us. We do not provide prices on the website because prices
fluctuate for many reasons.