Remove System Automatic Corrugation Machine Vacuum Sheet Four Color
This machine aimed at solving the existing carton printing
machinery poor automation, low stability, poor reliability,
unsightly appearance, short life and other problems. The product
adopts high speed direct printing method, which integrates
printing, drying, glazing, slotting, die-cutting, gluing box,
folding and carton forming.
Main technical parameters:
|JK1636 FULLY AUTOMATIC LEAD FEEDER FLEXO FOUR COLOR PRINTING SLOTTING DIE
CUTTING MACHINE DRYER|
|Max Machine Speed (pcs/min)||200|
|Economic Working Speed (pcs/min)||150-180|
|Max Feeding Size (mm)||1600×3600|
|Max Printing Size (mm)||1600×3400|
|Skip-feeding Size (mm)||1800×3600|
|Min Feeding Height (mm)||350(low speed,full printing)|
|Max Slotting Depth (mm)||380|
|Standard Plate Thickness (mm)||7.2|
|Suitable Cardboard Thickness (mm)||2 - 11|
|Main Motor Power (kw)||30|
|Total Power (kw)||100|
|Overall Dimensions (mm) L*W*H||15000×4500×1800|
►Continuous or skip feeding is available with counter;
►Copy sun automation lead edge feeder with strong vacuum transfer
precise and stable feeding;
►Variable frequency drive control for vacuum blower fan for
or decreased vacuum suction to match different size cardboard.
►Feeding roll is made of two-layer rubber,inner layer is soft and
layer is hard,this makes inner layer more flexible and surface more
wear-resistant,and reduce the flute damage of the cardboard;
►Dust remove system with brush and segmented vacuum sheets cleaner;
Self-locked system adopts for adjusting feeding rolls gap,motorized
and PLC control of feeder side guides;
►Motorized backstop forward /backward and up/down position for easy
and quick adjustment;
►Main motor is protected from starting up when units are not fully
closed and locked.
►Mounting roller with left and right both of side locking
mounting position more accurately.
►Pneumatic clutch is adopted on the anilox roll to:
(1)Make the roll run at the same speed as the main motor when the
(2)Make the roll stop when the unit is not printing;
(3)Reduce the possibility of damage to the rubber roll and the
roll for inproper operation;
(4)Allow units which are not in use to be washed up while running.
►Printing register is digitally controlled by motor and PLC
►Transverse register is also digital controlled by motor and PLC
►Quick set and self locking pull collars.
►A fixed device of printing register and brake of electromagnetic
is used when the unit is opened.upon closing the unit,the positions
precisely restored so the unit is ready for production without
►Cleaning function can be automatically switched to ensure the ink
►Automatic resetting after cleaning the printer
►using infrared irradiating combined drying system for fast color
fixing,guarantee the drying of ink between colors,avoiding
smudging.can directly follow the light oil,slotting,die cutting
►vacuum suctioned drying unit;independent servo drive(optional)
►entire process roller-type vacuum suction transport system.
►heating range can be chosen according to the cardboard size,the
bellows damper can adjust by automatic according to the cardboard
►lift controlled transport table
►customers can choose three drying system according to their
configuration:hot air or infrared or ultraviolet light.
►the drying system by the import PLC program automatic
controlling,Man-machine dialog control and display
►Automatic temperature control, fault alarm protection, automatic
detection alarm, fault status display
►Drying system with the host control starting and closing double
protection, completely solve the cardboard directly irradiation
heat and burning this question when the machine stop.
►Single shaft five blades slotting ,an internal gear adjusts the
of the carton box and prevents the lubricating oil from spilling or
leaking onto the cardboard
►The first pre-creasing,the cardboard not be damaged after
►Upper creasing roll covered by anvil ring,so cardboard is not
►Slotting bosses move along liner lead rails and are driven by lead
screws for flexible and precise movement.
►Upper boss and lower boss are coupled to keep the two knives
while moving,which is helpful to prolong service life.
►Slotting register and height of carton box are digital controlled
motor and PLC.
►Transversal movement of the pre-creasing rolls,and slotting
digital controlled by motor and PLC
►Motorized controls of the slotting bosses caliber.
►A protective device prevents the slotting knife from crashing when
height of the carton box is adjusted.
►Flexible angle cutting knife can cut 3 or 5 or 7 ply cardboard
adjustment,easy to operate.
UP Glue Unit
◆Up Gluing part adjust electric control , Human-computer control .
◆Automatic glue spraying system
◆Equipped with the servo control of the glue spraying and the host
◆Folding beam electric displacement, man-machine interface control.
◆ The rear drive shaft is located at the top of the folding beam.
◆ With adjustable folding stick.
◆ Equipped with elastic pressure wheel of belt conveyor.
◆ Equipped with a synchronous conveyor belt.
◆Equipped with carton guide side roller.
◆The upper belt tension is set by the cylinder, and the belt
elongation automatically compensates.
Whole paper accumulation department.
◆Have the wind pressure board down, the front of the cardboard
◆ Equipped with electric adjustment accumulation department.
◆ Equipped with front and rear baffle electric displacement
Counting the discharge part.
◆ The number of carton boxes can be automatically discharged from
15~30.◆With board lifting roller device.
It has the function of high and low power adjustment of press
The lead feeder, servo phase, the vacuum adsorption, many rows
dislocation arrangement design, favors the cardboard stable
transmission. Reinforced frame positioning device, gear direct
rigid connection in the wallboard, imported gear from Taiwan and
bearing from Japan with high speed and long-term stability,with
integral anilox roller lift version to keep promotion assure
printing, the whole machine adopts the French schneider electric,
host, fan, PLC, touch screen use Germany Siemens.
Rubber roller surface with double glue technology, low pressure
transmission from the impact of the pneumatic pressure, can control
the whole vacuum adsorption, more with a word dislocation
encryption round ceramic array, cardboard more adsorption, without
beating, the overall precision of the anilox roller transmission
device, full speed to reduce anilox roller beating,with servo phase
adjustment increase anilox roller printing quality, down adjustment
pressure structure of the die cutting roller keep paperboard line
transmission precision guarantee.