| Categories | Pipe |
|---|---|
| Brand Name: | Eagleflying |
| Model Number: | PVC-U series |
| Certification: | ISO, CE |
| Place of Origin: | China |
| Payment Terms: | L/C, T/T |
| Packaging Details: | Export packaging |
I. Product introduction of PVC-U water supply pipelines
I. Brief Introduction
We adopt high quality PVC resins and imported processing additives
as the raw materials, with a scientific formulas to produce PVC-U
supplying water pipes and fittings.
Our company owns 36 PVC-U production lines and over 100
injection-molding machines to produce fittings. Our products are of
high quality, have various specifications and have passed strict
inspections. Our products have passed the ISO 9001 Quality
Management System Certificate and ISO 14001 Environmental
Management System Certificate. Our products match the GB/T
10002.1-1996 and GB/T10002.2-2003 standards respectively.
Properties of Ginde PVC-U water supply pipelines
a) Light weight: weight in unit length is only 1/6 of the cast-iron
pipes.
b) High strength: tensile strength comes to above 45MPa.
c) Less resistance: wall of the inner layer is smooth, prevents
scum buildup. The water pressure and discharge of PVC-U pipe is 30%
lower than cast pipes in the same diameter, and it can save the
cost of discharge power.
d) Corrosion resistance: it has the excellent resistance to the
corrosion caused by acid, alkaline, chemical and electricity.
Stains will not occur.
e) Simple installation: connect easily with rubber rings. It is
easy to carry out and seals well.
f) Long lifespan: under the normal working pressure, the lifespan
reaches to 50 years.
g) Sanitary and non-toxic: it accords with the drinking water
standard; the water is conveyed without secondary pollution.
h) Low cost: with lower cost of installation, transportation and
raw material, the total cost of the whole engineering makes the
cost 30% lower than cast pipes.
2.Major technical indicators of PVC-U water supply pipeline
Item | Technical index | Test method |
Density | 1350-1460kg/m3 | Density measured in terms of GB1033 |
Vicar softening temperature | ≥80℃ | Vicat softening temperature measured in terms of GB8802 |
Vertical shrinkage tate | ≤45℃ | Vertical shrinkage rate measured in terms of GB6671.1 |
CH2C12 inners test(15℃,15min) | No change on the surface | CH2C12 immersion test measured in terms of GB/T13526 |
II. Production technique of PVC-U water supply pipelines
1. Production equipment
The plastics molding extruder (for tubing) is designed and
manufactured with the most advanced technology at present in the
world, which owns advanced performances such as high-speed
extrusion molding, automatic cut-of-length, on-line hot-melt tube
end expansion and PC software controlled production processes.
The PC software (C4) for controlling the production processes can
be inputted and set in advance according to process specification,
start-up time, temperature control criterion and other conditions
during production operations. Meanwhile, all the modification of
running speed, melt pressure, extrude output, torque load and
regulations of equipment motor and screw rod is automatically
monitored, recorded, stored for reading; it also can alarm
dangerous conditions, automatically shut down and display
suggestions or correcting instructions on the screen (it can be
read and used with three languages). Therefore, it can guarantee
fundamentally equipment in good condition as well as normal
operation of production processes.
Advanced mechanical structural design adopts Plano conic twin screw
with slenderness ratio of 36D, perfectly integrated with scientific
and special compression ratio process technological design and
mechanical structure. It owns prominent performances such as
secondary air exhaust, repeated compression, moderate melting,
high-speed extruding production process. Meanwhile, it is equipped
with large mixing equipment imported from Germany Reimelt, which
owns the functions of automatic metering and convey, dust-free seal
and uniform mixing and dispersing; therefore it can guarantee the
continuous process of production automatically.
2.Raw material
PVC resins are adopted as the carriers; they own the high quality
performance such as accurate response to temperature, timing melt
and rapid absorption of additives when reducing the intermolecular
gravitational interaction of resins. Meanwhile, our company has
adopted the world top brand complex thermal stabilizer – German
“BEAR” which can capture, inhibit, absorb and neutralize emitted
hydrochloride, make double-bond addition reaction with polyene and
replace active and unstable atom chlorine in molecules. Therefore,
catalytic degradation and oxygenolysis of resins under molting
state can be effectively and scientifically controlled.
|
