SS 316L Co Knitting With Glass Fiber Mist Eliminator Square Shape
MATERIAL OF Constructing demister mist eliminator:
co-knit of 316L + glass fiber
|Shape & Size||600*600||mm|
|Wire Diameter||0.23 + ?||mm|
|Grids||Φ10 round rods||mm|
Other materials Mesh and grids may be made from i.e. SS304, 304L, 316, 316L, 321,
310S, 201, Duplex 2205, 316Ti, 904L, Monel, Nickel, Alloy 20,
Copper, P.T.F.E., H.D.P.E., P.P., co-knit of 316L + PTFE, alloy 20
+ PTFE, 304+PTFE, 904L + PTFE, 304+glass fiber, 316L + glass fiber,
904L + glass fiber, 316L+PP etc. and other metals, alloys or
plastic which can be drawn or extruded.
Applications of SS316L + glass fiber co-knit mesh demister mist
Low pressure rectifying column:
The co-knit mesh mist eliminator increases the purification ratio,
that enables a deep cut in residue oil to improve the quality of
gas oil. The improved gas oil contains less carbon, asphalt and
corrosive metals, increases decomposition capacity by the residue
load in the regenerator, and maintains a higher contact reaction to
produce a higher gasoline yield ratio.
Lubricant refinery tower:
The mesh demister increases production volume and yield ratio and
improves production quality. As a result, the refining of solvent
and white clay is practically rationalized.
Improved performance can be obtained in equipment for processing
asphalt, organic intermediate substances, fine chemicals, vegetable
oil, tall oil, fatty acid, glycerin, lubricant, benzene and
The co-knit mesh mist eliminator prevents carryover of valuable
products, can be appropriately used for boiler feed water or
processes, and produces high quality condensate.
Demister produces clean and dry solids of less than 0.5ppm and
prevents water from flowing back into the turbine.
Effective for completely removing all types of flying and
accompanying liquids such as absorption oil, glycol and amine
dissolution and discharges clean and dry gas. This also improves
The mesh pad demister mist eliminator is installed above the surface of the liquid with some distance.
From one hand it allows some space for the natural disengagement of
the coarsest natural particles. From the other hand, it ensures
that the gas/ vapour flow is uniform over the whole area of the
The gas / vapor containing droplets passes into mesh pad demister
at a predetermined velocity. It easily finds open path through the
mesh but the droplets and mist impinge on the filaments of mesh
where they coalesce and eventually grow to such a size to overcome
surface tension of liquid and force of gravity. Then the liquid
droplets so formed fall down. And the mist free gas / vapour passes
through the mesh demister pad.