Descriptions of the vacuum brazed diamond grinding head:
With the advantage of being sharp, better abrasion resistance,
strong bonding and not easy to
spall off, it is the excellent small shank grinding tools, grinding
can be used as the inner circle,
rounded, trench, arc, cone and other special surface.
Features of diamond grinding head for stone and jade:
It owns a strongly good coherence depending on the chemical
metallurgical effect happening on abrasives, brazing filler metal
and matrix interface while the high temperature processing. And
Good to hold the abrasive particles firmly in the process of
2.Better convexity of the abrasives
Usually the height of the convexity of abrasives could reached
70-80 percent, as a result, the tools
would be more sharp, what’s more, the grinding force and the
grinding temperature will be apparently decreased.
3. Enough place for the scraps
It’s ample places for the high convexity of the abrasives and it
can avoid blockage in grinding process.
4.Less wastefulness of the diamond
In the process of brazed diamond tools grinding, there only are
less and rare fall of the abrasives, most of them could be utilized
to their highest of 70-80 percent.
Cutting granites, concretes, rebar, ceramics, glass, woods,
plastics and so on
Mainly used in cast iron, hard alloy, concrete, stone, ceramic,
resin, magnetic materials, glass and other hard brittle materials
production and processing.
For shaping variety of nature or artificial quartz material, such
as calcite, fluorite, apatite, granite,
quartz and jade carving including gem, crystal, agate, glass, etc.
Specification of vacuumed diamond grinding head:
|Continental Knife I||45*12.7*70*26.5mm||40/45|
|Continental knife V||49.5*12.7*70*26.5mm||40/45|
|Round bottom knife R12||23*12.7*55*23mm||40/45|
|Round bottom knife R15||30*12.7*55*23mm||40/45|
|Round edge knife||37.5*12.7*81*15mm||40/45|