Vacuum Transformer Mobile Oil Treatment Plant / Insulating Oil
Portable Oil Purifier
Description of transformer oil purifier
High Vacuum transformer oil treatment is mainly used for removing
trace water, gas and impurities from insulating oil, improving the
insulating oil performance index. It is mainly applied to
purification of 110KV,220KV,500KV,750KV,1000KV power transmission
equipment insulating oil.Also it applied to treat low viscosity oils, like insulating oil,
turbine oil, and hydraulic oil in the transmission equipment which
is lower than 110KV.
1. Horizontal double vacuum separation technology, doubling the
evaporation area and degassing time
2. Multi-stage precise filtration system with gradually increasing
precision, which can effectively remove mechanical impurities from
3. Automatic double-infrared liquid level controller, pressure
protector, which ensure long-term safely and reliable operation.
4. Automatic defoaming system with dual electronic monitoring
system, which avoid the foam ejecting and gushing to vacuum pump.
5. Advanced cooling system of vacuum pump, it reduces the frequency
of oil’s replacement and extends the life of vacuum pump.
6. Interlocked protective system connects oil pump, heater and
liquid level sensor, avoiding blank heating, blank pumping, oil
leak and electricity leak. If there is any fault, machine will be
power off automatically.
7. Online oil treatment, vacuum drying and vacuum oil-filling for
Technical Specification of oil purifier machine
|Vacuum Range||Mpa||-0.092 ～ -0.099|
|Max Vacuum Range||Pa||≤50|
|Temperature Range||℃||45 ～ 65|
|Power Supply|| ||380V/3P/50Hz(or as needed)|