Home >

RoHS Compliant Fiber Optic Transceiver 10GE SR 850nm 550m Xfp Module XFP-10G-SR

Categories Fiber Optic Transceiver
Brand Name: Fibery
Model Number: XFP-10G-SR
Certification: ISO9001
Place of Origin: China
MOQ: 1Pcs
Price: Negotiable
Payment Terms: T/T, L/C, Western Union, MoneyGram,Paypal
Supply Ability: 5000Unit/Month
Delivery Time: 3-6 work days
Packaging Details: pvc box+outer carton
Product name: fiber transceiver
Wavelength: 850nm
Distance: 550m
Data rate: 10Gb/s
Interface: Dual LC
Power supply: Single +3.3V
Warranty: 3 Years
Application: Ethernet,Fiber Channel,Switch to Switch interface
  • Product Details
  • Company Profile

RoHS Compliant Fiber Optic Transceiver 10GE SR 850nm 550m Xfp Module XFP-10G-SR

Sfp Fiber Optic Transceiver 10GE SR 850nm 550m Xfp Module XFP-10G-SR
Description
The XFP Bidi is compliant with the IEEE803.3ae 10Gbase-Bx. and transmission distance up to 20km on SMF .The transceiver module comprises a transmitter with a 1270 or 1330nm DFB laser transmitter, an integrated 1330 or 1270nm detector preamplifier(IDP) mounted in an optical header and a limiting post-amplifier IC. Transmitter and receiver are separate within a wide temperature range of 0℃ to +70℃ for commercial temperature, -40 to 80 °C for industrial temperature, and offers optimum heat dissipation and excellent electromagnetic shielding for 10 GbE systems application.
Specification
  • Support 10Gbase
  • Hot-pluggable XFP footprint
  • RoHS compliant and lead-free
  • Single +3.3V power supply
  • 10 Gigabit Ethernet over Cat 6a cable
  • Ambient Operating temperature: 0°C to +65°C
Characteristics

Absolute Maximum Ratings

ParameterSymbolMin.Max.UnitNote
Supply VoltageVcc-0.54.0V
Storage TemperatureTS-4085°C
Relative HumidityRH085%

Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

General Operating Characteristics

ParameterSymbolMin.TypMax.UnitNote
Data RateDR9.9510.312511.3Gb/s
Supply VoltageVcc3.133.33.47V
Supply CurrentIcc5500mA
Operating Case Temp.Tc070°C
TI-2080

Electrical Characteristics (TOP(C) = 0 to 70 , TOP(I) =-20 to 80 ,VCC = 3.13 to 3.47 V)

ParameterSymbolMin.TypMax.UnitNote
Transmitter
Differential data input swingVIN,PP120820mVpp
Transmit Disable VoltageVD2.0VccV1
Transmit Enable VoltageVENVeeVee+0.8
Input differential impedanceRin100Ω2
Transmit Disable Assert TimeTda10us
Receiver
Differential data output swingVout,pp340850mVpp3
Output rise time and fall timeTr, Tf38Ps4
LOS FaultVLOS_FVCC-0.5VccV5
LOS NormalVLOS_NVeeVee+0.5V5

Notes:

1. Or open circuit.

2. After internal AC coupling.

3. Into 100 ohms differential termination.

4. 20 – 80 %.

5. Loss Of Signal is open collector to be pulled up with a 4.7k~ 10k resistor to 3.15 – 3.6V.

Logic 0,indicates normal operation; logic 1 indicates no signal detected.


Optical Characteristics (TOP(C) = 0 to 70 , TOP(I) =-20 to 80 ,VCC = 3.13 to 3.47 V)

ParameterSymbolMin.TypMax.UnitNote
Transmitter
Operating Wavelengthλ126012701280nm
132013301340
Ave. output power (Enabled)PAVE-33dBm1
Side-Mode Suppression RatioSMSR30dB
Optical Modulation AmplitudePOMA-2.80dBOMA
Extinction RatioER44.5dB
RMS spectral widthΔλ0.45nm
Rise/Fall time (20%~80%)Tr/Tf45ps
Dispersion penaltyTDP3.2dB
Relative Intensity NoiseRIN-130dB/Hz
Output Optical EyeCompliant with IEEE 0802.3ae
Receiver
Operating Wavelengthλ132013301340nm
126012701280
Receiver Sensitivity(ER=4.5)PSEN1-12.6dBm2
Receiver Sensitivity(ER=6)PSEN2-14.4dBm2
Average Receive PowerPAVE0.5dBm
Receiver ReflectanceRrx-12dB
LOS AssertPa-30dBm
LOS De-assertPd-17dBm
LOS HysteresisPd-Pa0.5dB

Notes:

1. Average power figures are informative only, per IEEE 802.3ae.

2. Measured with worst ER; BER<10-12; 231 – 1 PRBS.


PIN #NameFunctionName/DescriptionNotes
1GNDModule Ground1
2VEE5Optional -5.2V Power Supply (Not requireed)
3LVTTL-IMOD_DESELModule De-select; When held low allows the module to respond to 2-wire serial interface
4LVTTL-OINTbInterrupt; Indicates presence of an important condition which can be read via the 2-wire serial interface2
5LVTTL-ITX_DISTransmitter Disable; Turns off transmitter laser output
6VCC5+5V Power Supply (Not required)
7GNDModule Ground1
8VCC3+3.3V Power Supply
9VCC3+3.3V Power Supply
10LVTTL-I/OSCL2-Wire Serial Interface Clock2
11LVTTL-I/OSDA2-Wire Serial Interface Data Line2
12LVTTL-OMOD_AbsIndicates Module is not present. Grounded in the Module2
13LVTTL-OMOD_NRModule Not Ready; Indicating Module Operational Fault2
14LVTTL-ORX_LOSReceiver Loss Of Signal Indicator2
15GNDModule Ground1
16GNDModule Ground1
17CML-ORDNReceiver Inverted Data Output
18CML-ORDPReceiver Non-Inverted Data Output
19GNDModule Ground1
20VCC2+1.8V Power Supply (Not required).
21LVTTL-IP_DOWN/RSTPower down; When high, requires the module to limit power consumption to 1.5W or below. 2-Wire serial interface must be functional in the low power mode.
21LVTTL-IP_DOWN/RSTReset; The falling edge initiates a complete reset of the module including the2-wire serial interface, equivalent to a power cycle.
22VCC2+1.8V Power Supply (Not required)
23GNDModule Ground1
24PECL-IREFCLK+Not used, internally terminated to 50ohm (100ohm diff).3
25PECL-IREFCLK-Not used, internally terminated to 50ohm (100ohm diff).3
26GNDModule Ground1
27GNDModule Ground1
28CML-ITD-Transmitter Inverted Data Input
29CML-ITD+Transmitter Non-Inverted Data Input
30GNDModule Ground1

Notes:

Notes:

1. Module circuit ground is isolated from module chassis ground within the module.

2. Open collector; should be pulled up with 4.7k – 10k ohms on host board to a voltage between 3.15Vand 3.6V.

3. Reference Clock input is not required.


Ordering Information

XFP Bidi,9.95 to 11.3Gb/s, 1270/1330nm, 20km, 0~70℃, with Digital Diagnostic Monitor
XFP Bidi,9.95 to 11.3Gb/s, 1330/1270nm, 20km, 0~70℃, with Digital Diagnostic Monitor
XFP Bidi,9.95 to 11.3Gb/s, 1270/1330nm, 20km, -20~80℃, with Digital Diagnostic Monitor
XFP Bidi,9.95 to 11.3Gb/s, 1330/1270nm, 20km, -20~80℃, with Digital Diagnostic Monitor
Applications

●10GBASE-LR at 10.3125Gbps

●10GBASE-LW at 9.953Gbps

●Other optical link

Product Pictures
Factory Image

FAQ

Q1. Can I have a sample order for this product?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A:Sample needs 3-6 days, mass production time needs 1-2 weeks for order quantity more than

Q3. Do you have any MOQ limit for sample order?
A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping are also optional.

Cheap RoHS Compliant Fiber Optic Transceiver 10GE SR 850nm 550m Xfp Module XFP-10G-SR for sale
Send your message to this supplier
 
*From:
*To: Shenzhen Fibery Photoelectron Technology Ltd.,
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You may also be interested in :
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly