Home > Earphone & Headphone >

PP ABS + PC Aerial Fiber Optic Splice Enclosure / Junction Box Enclosure

Categories Fiber Optic Splice Closure
Brand Name: KCO, Kocent Optec Limited
Model Number: KCO-GJS22
Certification: iSO9001, RoHS
Place of Origin: Guangdong, China
MOQ: Negotiation
Price: Negotiable
Payment Terms: T/T, L/C
Supply Ability: 5,000pcs/week
Delivery Time: 5~14 working days
Packaging Details: Carton box, wooden pallet
Type: Inline type
Cable ports: 2 in 2 out
Cable diameter: 8.0~22.0mm
Min. capacity: 2 cores
Max capacity: 48 cores
Material: PPR, ABS, PC, PP
  • Product Details
  • Company Profile

PP ABS + PC Aerial Fiber Optic Splice Enclosure / Junction Box Enclosure

FTTH Nap Outdoor 16Cores Fiber Optic Splitter Splice Closure Junction Box KCO-GJS22 PC+ABS

KCO-1608D splitter splice closure integrates distribution and splitting in one, can realize the direct fusion and branching of the optical cable, and is suitable for the wiring connection in the optical communication equipment. Through the adapter and jumper to bring in the signal to realize optical distribution function, it is also suitable for fiber optic cables and pigtail protective connection; the unique three-tier design of the box body can be used as a fiber splitter or splice box; the flip board can be flipped≥180°,it is more convenient to install the box or maintenance. If remove the board, it can bed as a splice closure to meet different choices.


- The product is made of high-quality impact resistant plastic and has a standard user interface that can be re-opened.

- Can accommodate two 1x8 PLC splitter LGX module or steel tube type;

- Anti-ultraviolet,anti- impact and waterproof function;

- Unique flip board, flip angle ≥ 180 °, fusion area and distribution area is more obvious, reducing the cable crossing;

- Fiber optic cable can go in and out of the box without cut the cable.


Dimension (mm)290*190*110290*190*90
Cable diameter (mm)Φ7-φ18Φ7-φ18
Cable port4pcs round ports, 16pcs 2*3mm drop cable ports2in 2 out
Max. Split ratio2pcs 1x8 mini splitter/
Max. Splice tray1pc3pcs
Max. Fusion splice24 cores72 cores

Technical parameters:

- Optical fiber radius of curvature: ≥40mm

- Splice tray additional loss: ≤0.1dB

- Temperature range: -40°C ~ +60°C

- Anti side pressure: ≥2000N/10cm

- Impact resistance: ≥20N.m

- Waterproof level: IP65

Packing list:

Main body1 set
L=400mm bare fiber buffer tube2 pcs
Hoop / clamp2 pcs
3x100 nylon tie26 pcs
Heat shrinkable tube L=60mm2-72 pcs (configuration on demand)
User manual1pc

Product pictures:

Installation way:


CharacteristicsValue/PerformanceMethods and Conditions
Air TightnessNo air bubble seenPut closure under water for 15min with closure's internal air pressure set at 100kPa±5kPa.
Remains100kPa±5kPaMeasure the internal pressure 24 hours later
Air Tightness after re-installationNo air bubble seen and pressure remains unchangedDo re-entry and re-installation 3 times and repeat above Air Tightness Tests.

Axial Pulling

Pressure remains unchanged
Pulling force: 1000N
Time: 1min
Internal air pressure: 60kPa±5kPa


Pressure remains unchanged
Applied pressure: 2000N/100mm
Time: 1min
Internal air pressure: 60kPa±5kPa


Pressure remains unchanged
Impact energy: 16N.m
No. of impacts: 3
Internal air pressure: 60±5kPa


Pressure remains unchanged
Bending angle±45°(in two opposite directions)
Tension: 150N
No. of bending: 10
Internal air pressure: 60kPa±5kPa


Pressure remains unchanged
Twisting angle: ±90°
Torque: 50N
No. of twisting: 10
Internal air pressure: 60kPa±5kPa

Temperature Cycling

Pressure drop ≤5kPa
Cycling range: -40 ~ +60°C
Cycling time: 2hrs at -40°C, then 2hrs at +60°C
No. of cycling: 3
Internal air pressure: 60kPa±5kPa
InsulationResistance between
metal parts:2.0x105MΩ

Soak closure into water in 1.5m-depth for 24hrs, and measure the insulation resistance after taking it out of water.
Resistance between each metal part and ground:2.0x105MΩ

High Voltage

No voltage break-downs and sparks

Soak closure into water in 1.5m-depth for 24hrs, then apply 15kV DC to the metal parts inside
Cheap PP ABS + PC Aerial Fiber Optic Splice Enclosure / Junction Box Enclosure for sale
Send your message to this supplier
Characters Remaining: (0/3000)
Inquiry Cart 0
Company Info
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly