Home > Other Lights & Lighting Products >

Aluminum solar road studs cat eye pavement marker solar LED reflective lights

Categories Solar Road Studs
Brand Name: changdaneng
Model Number: CDN-BO01
Certification: CE
Place of Origin: ShenZhen China
MOQ: 10
Price: Price: USD 6 -7 per/ pcs
Payment Terms: T/T, Western Union
Supply Ability: 1000 pcs/week
Delivery Time: 5 working days
Packaging Details: 2pcs/box, 60pcs/carton, 18.5kg/ctn Carton size:400*275*280mm
Name: Amber led road stud
Material: Aluminum
Solar panel: Mono-crystalline Silicon
Battery: NI-MH 1.2V/800MAH
LED visibility: 1000 meters
Capacitor cavity: 800mAh
  • Product Details
  • Company Profile

Aluminum solar road studs cat eye pavement marker solar LED reflective lights

Aluminum solar road stud cat eye pavement marker solar LED reflective lights

SPECIFICATIONS

Dimensions 125*43*30mm

Weight 330g

Housing material Solar cell&I.C(integrated circuit)

Covered with U.V coated polycabonate(super-intensity)

Out case Aluminum alloy

Reflector Corner cube,Lexan 143

Refector color Yellow / Red / White / Blue / Green

LED 3 pcs per side

LED color Yellow / Red / White / Blue / Green

LED output 5000 mcd

LED output frequency Steady or flashing

LED visibility Up to 1000 meters

Activation Photo sensor

Storage device Super capacitor or NI-MH battery

Capacitor cavity 800mAh

Charge condition Sunny day -2hr,/Rainy day-8hr.

Life span Up to 5 years for NI-MH battery type

Lighting time 12-16 hour for steady model after charged fully

Waterproof IP68

Operating temperature -25 to +80C

Manufacturer’s warranty One year


FEATURES

FEATURES

Solar powered high intensity LEDs for superior performance in luminosity.

Super strong polycarbonate cover and aluminium shell for impact durability.

Maintenance free design. Automatic on/off light sensor activation.

Simple installation. Same procedure as with existing conventional markers.

Stud-free mounting for off-ground installation, eg. guard rails and barriers.

Operational life time is 3 to 5 times longer than conventional markers.

Double sided, single sided, 5 colours, steady or flashing modes.

Solar road stud is easy to install with virtually no maintenance.

APPLICATIONS

APPLICATIONS

Solar powered markers, bricks and other products can and should be used for:

Wet Roads,Foggy Conditions,Dark Rural Country Roads

Dangerous blind corners and sharp-curves, black spots and poorly lit areas...

Areas with whimsical and unpredictable weather conditions (coastal roads, foggy areas, wet and rainy regions, etc.)...

Joint intersections, on and off ramps, center lines and dividers, entrance warnings, carpool lanes, bridges, crosswalks...

Guidance lines, traffic islands, roundabouts, aprons, mountain roads...

Taxiways at airports, bike and pedestrian lanes, aboard ships and watercrafts...

Entertainment areas, parking lots, hotel entrances, gas stations and many more!

INSTRALLATION

The Solar road stud Series accumulates energy and charges itself throughout the day. As soon as dusk begins to fall, the L.E.D.s start working automatically. The solar road studs are developed to ensure a higher degree of safety for cars and drivers at blind spots and dangerous hard-to-see areas on the road.

For optimal performance, the recommended distance between each solar road studs are as follows:

Install SiteDistance
Highways and Expressways7 - 8 yards (5 - 6 meters)
Dangerous Entrances and Exits4 - 5 yards (2 - 3 meters)
Access or Exit ways for Hospitals, Parking Lots, etc.0.5 - 3 yards (0.5 - 2 meters)

Step 1 - Mark the installation points (figure A). See chart above for recommended distances. Areas in tunnels, inside buildings, under bridges, or places where there is no sunlight are not suitable for installation.

Step 2 - Drill the holes using the following specifications (figure B):

Diameter: 1.5" (30-32mm) Depth: 2.6" (60-65mm)

Step 3 - Clean the drilled holes and remove all dirt, sand, dust and moisture. Make sure the hole is dry before applying any adhesive (figure C). Also prior to using adhesive, place the SolarMarker in the drilled hole and check for a tight and even fit as well as clearance for the desired alignment.

Step 4 - Fill up the drilled hole with hot melted glue or regular epoxy (figure A) and place the SolarMarker into the adhesive paste. Align accordingly (figure E).

Step 5 - Check and make sure that the glue is completely dry and settled before exposing the solar road studs to traffic and road activity. Check the manufacturers' recommendations for proper drying time for the adhesive.

packing:

Cheap Aluminum solar road studs cat eye pavement marker solar LED reflective lights for sale
Send your message to this supplier
 
*From:
*To: Shenzhen Changdaneng Technology Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You may also be interested in :
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    Contact Us Quickly