Home > Valves >

ON / OFF Multi Turn Actuators , Modulating Valve Actuator High Torque CE ISO Approved

Categories Multi Turn Actuators
Brand Name: ACKO
Model Number: AKM/AKE03...55
Certification: CE ISO
Place of Origin: China
MOQ: Negotiation
Price: Negotiation
Payment Terms: T/T
Supply Ability: 100 sets per week
Delivery Time: 7-14 working days
Packaging Details: standard sea worthy packing
Power Supply: 220/380Vac, 50/60 Hz;
Control style: ON/OFF
ON/OFF model: AKM/AKE03...55
Feature: heavy duty
  • Product Details
  • Company Profile

ON / OFF Multi Turn Actuators , Modulating Valve Actuator High Torque CE ISO Approved






Overview

In many areas such as islands, plateaus, pastoral areas, desert Gobi, and remote mountainous areas, the control of pipe network valves is mostly powered by natural energy sources such as solar energy and wind energy. However, a solar power supply system consists of a solar photovoltaic cell module, a solar controller, a battery (group), etc., and an inverter must be configured to invert the direct current (DC24V) generated by the solar module into an alternating current (AC220V) according to actual needs. The normal use of the valve has the inconvenience of high cost and low efficiency. In order to meet the demand for electric valves in these special fields, our company designed and developed a vector-controlled permanent magnet brushless DC motor based on the AC power supply technology, and developed the DZ series DC power supply intelligent non-invasive valve electric device. Powered by the battery pack. This is an intelligent electric valve control product integrating DC motor control technology, absolute coding technology, programmable single-chip technology, infrared remote control technology, liquid crystal display, magnetic control switch and other recent automatic control technology and advanced manufacturing technology.
DZ series DC power supply intelligent non-invasive valve electric device is mainly used for the valve for linear motion of the opening and closing parts, such as gate valve, globe valve, diaphragm valve, gate, etc., for opening, closing and adjusting the valve. It is an indispensable driving device for remote control, centralized control and automatic control of valves. It has the features of full function, reliable performance, advanced control system, small size, light weight and convenient use and maintenance.
The product is tested by a number of performance tests, with stable and reliable performance and convenient operation. At present, it is the only valve electric actuator product in China that uses DC power supply.



Features

1. Vector control of permanent magnet brushless DC motor - transforming the nonlinear variable of complex coupling inside the motor into a relative coordinate system as a stationary DC variable (such as current, flux linkage, high voltage, etc.) through coordinate transformation to find the constraint condition to control the stator current The vector decouples the flux linkage from the torque to achieve high-performance speed regulation of the motor, which can realize the stepless speed regulation control of the electric device, which is simple and convenient;


2, non-intrusive - through the use of non-contact magnetic control knob or infrared remote control, all debugging and parameter settings can be completed without opening the cover, debugging is simple and intuitive;


3, man-machine interface - using high-definition, high-contrast LED liquid crystal display, full Chinese menu display of various states and parameters;


4, precise positioning - valve position acquisition using multi-turn absolute encoder measurement accurate, reliable, permanent preservation of valve position information;


5, hand / electric interlock - uniquely designed to manually disconnect the control power during manual operation to ensure safe and reliable manual operation;


6, on-site remote control - can use infrared remote control for debugging, parameter setting and query;


7, signal configuration - output signal can be freely configured, each signal can be selected according to needs;


8. Remote control signal - The remote control output signal is a passive contact, which can realize the on-position, off-position, on-site remote control status, fault alarm, remote analog valve position indication signal;


9. Remote control - After the DCS or PLC is connected to the field actuator through the cable, it can be remotely controlled by the switch quantity or the adjustment amount (the standard is equipped with the switch quantity control and the adjustment quantity control unit, which can be used freely). The switch quantity control input has valve opening, closing valve, stop and hold, optional jog and hold mode, and the input signals are all optically isolated to resist 2.5KV surge. The adjustment amount control adopts linear optocoupler isolation, and can open and close the valve according to the input analog signal (4-20mA).


10, bus control - with Modbus, Profibus and industrial Ethernet multiple bus control mode (bus communication function is optional);


11. Control status protection - The actuator can be locked to the remote, on-site or disconnected state using the mechanical hook on the electrical box cover to avoid misuse. You can also enter the password setting menu of the actuator to set the password. You can change the control status or enter the setting interface only by entering the corresponding password.


12. Special working conditions - The mechanical driving part and the intelligent control unit can be installed separately according to the site conditions.




Specifications


1) Power supply: DC DC48V±10%, optional power supply: DC24V±220V. Instructions when ordering;
2) Ambient temperature: -20 ° C ~ +60 ° C
3) Average relative humidity: ≤95% (+25°C)
4) Atmospheric pressure: 80kPa ~ 106kPa;
5) Protection level: IP65 (special order IP67/68);
6) Working system: The intelligent switch type is S2-10/15 short-time working system, the intelligent adjustment type is S4-25% periodic intermittent working system, the load sustained rate is 25%, and the adjustment frequency is Max1200c/h (1200 times/hour). );
7) Adjusting amount signal: input 4~20mA DC, output 4~20mA DC;
8) Basic error: ≤1%;
9) Travel repeat error: ≤ ± 1%;
10) Dead zone: 0.5% to 10% adaptive or adjustable;
11) Working environment: where there is no strong vibration and impact, no corrosive gas that destroys metal or insulating materials;
12) Flange connection standards: JB2920, GB12222, ISO5211, GB12223.

OUR COMPANY


OUR FACTORY


Cheap ON / OFF Multi Turn Actuators , Modulating Valve Actuator  High Torque CE ISO Approved for sale
Send your message to this supplier
 
*From:
*To: Bluetrend (Shanghai) Industrial Equipment Co., Ltd.
*Subject:
*Message:
Characters Remaining: (0/3000)
 
You may also be interested in :
Inquiry Cart 0
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    More from this Supplier
    Contact Us Quickly