Ultrasonic Wire Splicer 20Khz Suitable for 30 Square mm Wire Metal
Welding
Ultrasonic copper alloy wire harness welding machine, ultrasonic
copper braided wire welding machine, ultrasonic multi-strand copper
wire bonding machine, ultrasonic copper wire wire bonding machine,
ultrasonic copper wire welding machine, ultrasonic automobile
copper wire harness welding machine, ultrasonic terminal connection
copper wire welding machine.
Principle:
Ultrasonic copper alloy wire harness welding machine is to use the
principle of ultrasonic friction to achieve surface welding of
different media, which is a physical change process. First, the
leading end of the wire must be processed to form a spherical
shape, and the welded metal surface is first pre-heat treated; then
the gold ball is combined with time and pressure to produce a sag
deformation on the metal welding surface, so that the two media A
reliable contact is achieved, and by ultrasonic vibration, a metal
bond is formed between the two metal atoms under the action of
atomic affinity, thereby realizing the welding of the gold wire
lead. Gold wire ball bonding is superior to silicon-aluminum wire
soldering in electrical and environmental applications, but the
application range is relatively narrow due to the necessity of
heating the weldment with precious metals. The welding time is
short, the welding is not overheated or the welding penetration is
not enough. The copper wire welding equipment does not need any
flux, protective gas, and the welded joint is an alloy layer which
is melted into one body. The chemical properties are stable and the
conductivity is good. The resistance system and the material are
original. The coefficients are basically the same. No splash,
bright solder joints, no copper plating, no cracking at the
terminals.
Parameters:
Item No | QR-X2020A | QR-X2030A | QR-X2040A |
Power | 2000W | 3000W | 4000W |
Welding Area | 0.5-16mm2 | 0.5-20mm2 | 1-30mm2 |
Air Pressure | 0.05-0.9MPa | 0.05-0.9MPa | 0.05-0.9MPa |
Frequency | 20KHZ | 20KHZ | 20KHZ |
Voltage | 220V | 220V | 220V |
Weight of horn | 18KG | 22KG | 28KG |
Dimension of Horn | 530*210*230mm | 550*220*240mm | 550*250*240mm |
Generator Size | 540*380*150mm | 540*380*150mm | 540*380*150mm |
Ultrasonic copper alloy wire harness special welding machine is
mainly used for copper alloy terminal and single-strand,
multi-strand copper alloy wire welding, multi-strand copper wire
welding, multi-strand wire and enameled wire welding, eliminating
soldering false soldering, low temperature embrittlement, The
connection is not strong. It is widely used in industries such as
processing wires, plug wires, computer peripherals, communication
network electronic products, and automotive cable. Qianrong
Ultrasonic can realize advanced processes such as “pressing”,
“shaping” and “end burning ball” according to different
requirements of customers to improve the reliability of welding.
Application:
Wiring of electric vehicles, motorcycles and electric vehicles;
welding of stranded wires and wires; welding of rotors and
rectifiers; welding of rare metal electrical joints; welding of
large-sized wires and terminals; copper terminals and beryllium
copper alloys Welding; welding of electromagnetic wire terminals;
welding of braided copper wire and main power cable; welding of
multi-metal wire ends; welding of stranded wires and terminals;
welding of stranded copper wires and beryllium copper terminals;
engine extraction Wire end welding; wire terminal and molded
terminal welding; braided wire terminal and engine brush welding;
nickel plated lead and thermoresistor platinum wire soldering;
solid copper conductor and brass terminal soldering; copper braided
wire and brass Welding of terminals; welding of brush holder
assemblies; welding of solid copper wires and rare metal alloy
wires.
Ultrasonic Wire Splicer 20Khz Suitable for 30 Square mm Wire Metal
Welding

