Product Features:
1.Connecting multiple pieces of board after soldering,break often
hurt line or broken electronic component. the machine in order to
take the knife type segmentation can radically reduce stress,
prevent fracture of the solder joint cracking and parts, improve
production efficiency and quality
2.Using a flat knife sword round way, as for the lower plate flat
knife, a foot switch, the circular knife traverse move to the set
point, about to cut off the split aluminum plate, cut off but no
the wire, cut flat, no burr.
Product information:
1.Completely independent development, using microcomputer program
control, fixed-point precision, strong stability. Cut off single
slat within 0-460MM long one time.
2.Board cutting speed can be set high and low two kinds ,the speed
500mm / S and 300mm / S
3.The knife wheel walking knife stroke: 0-460mm. Under the knife
wheel height fine adjustment: 0-2mm to suit a variety of aluminum
substrate thickness. solving the problem of V-CUT aluminum
substrate groove depth. Operation desk height can be adjusted:
0-50mm.
4.Take the knife stroke can be set forward to stop point with the
board length, Stop point manually.
5.Tailgate depth range: 0-150mm. The maximum cutting width plate:
150mm, maximum cutting length plate: 400mm, maximum thickness of
the plate: 0.2-3.2mm, V groove between the maximum thickness:
0.25-2.0mm
6.on and under knife for imported high speed steel material,
extremely durable, while unfavorable knife can regrind.
7.Can plus supporting conveyor another, Convenient PCB which cut
well is sent out automatically
|
