High Pressure Hydraulic Tensile Testing Machine With 2000 KN
Model: IN-2000EY (200T)
Microcomputer screen display hydraulic UTM mainly adopts
four-standard column main machine of underneath-type oil cylinder,
used for tensile, compression, bending and shearing test for metal
and non-metal materials. It applies to various fields including
metallurgy, construction, light industry, aviation, aerospace,
material, institutions of higher education and scientific
Its test operation and data process meet requirements of standard
GB228-2002 “Material in room temperature: test method of metal tensile”.
|Testing force effective range||40KN~2000KN|
Gauge length of standard configuration is 50mm, maximum deformation
|Deformation testing accuracy||±0.5%|
|Max moving speed of piston||60mm/min.|
|Displacement measurement resolution||0.01mm|
|The Max tension space||1000mm|
|The Max compression pace||900mm|
|Flat sample clamping thickness||0~60mm|
|Flat sample clamping width||100mm|
|Clamping diameter of Round specimen||φ15~φ70mm|
|Support roller space of bending test||450mm|
|Width of support roller||160mm|
|Diameter of pivot||50mm|
|Clamping way||Hydraulic clamping|
Programmable amplifier plug-in mounted inside the PC,
automatic zero setting and calibrating
Oil source: 1140x700x930mm
|Power supply||Three phases AC380V 50Hz or specified by user|
1. The main machine:
The main machine adopts underneath type of oil cylinder, tensile
space is above the main machine, compression and bending space is
between the lower cross beam and working station.
Solid four-standard column and two-lead screw structure design, so
the whole machine has strong stability.
Movable cross-beam is designed with unique clearance elimination
mechanism, avoiding test error caused by cross-beam stress of B
There designs a sliding plate of 10mm between jaw and jaw splint,
effectively extending service life of jaw splint.
Test space can be divided into three segments for adjustment
according to length of specimen, the highest point is suitable for
the use of peripheral equipment like high temperature furnace.
2. Drive system:
Lower cross beam lifting adopts hydraulic motor, chain, and lead
screw pair drive to realize adjustment of tensile and compression
space. No matter in the state of adjusting space or in the test
process, it both reaches operation if zero clearance.
Screen display software:
It conforms to more than 30 relevant regulations of national
standards, like GB228-2002,GB228-2010.
1. Computer control system: it has advantages of high integration
level, stable performance and convenient adjustment. Can carry out
collection for test data and real-time dynamic display for test characteristics curve; test data file can
be saved by the method of Access
common database or SQLserve large database, which is convenient for achieving users’ resource sharing and
network management, and
This software have an easy access to various word2000 reports users
defined, solving the problem that different users or one same user
different requirements for the reports in different times, and it
can deal with original data of test force, displacement and time
and their derived
2. Batch test can realize classified display for curve, and curve
3. Monitoring test process: can realize real-time display for
various parameters like test force, displacement and curves in the test.
4. Hierarchical management function for software permissions: to
improve safety of software and data, this software can realize
management function by setting different passwords protection.
5. Result representation function: after finishing and saving test,
users can open it at any time in the future and reanalyze test data
6. Result contrast function: can observe various test curve at the
same time, and can realize Characteristics contrast of specimen to be analyzed
by superposition and fractionated gain of various curves.
7. Force interface: force channel interface and test software can
equip all kinds of sensors according to users’ need, and can conduct mark,
parameters modification and normal test.
Basic configuration of system:
1. Main machine of tester (Main machine adopts underneath type of
2. Integrated oil source
2.1 High-pressure pump
3. Two-path programmable amplifier, resolution is 1/300,000
4. High-precision load cell
5. Guyed displacement measurement system
6. Full set attachment grips include: tensile fixture &
compression fixture & bending fixture
7. Dedicated control software
8. Lenovo computer
9. HP A4 ink-jet printer
10. Technical data: Operation manual