Max Magnification 65X Trinocular Zoom Stereo Microscope with Long
Working Distance 110mm
◆ Includes iStereo-113 (binocular) and iStereo-113T(trinocular).
◆ Non-flash in focus course while from high to low magnification
◆ Large depth of view, width of visual fields, super long working
distance, high cost effective
◆ Extensively applied in field of modern biology research,
semiconductor and other science and technology industry.
|Magnification||Total magnification(standard outfits): 10X~65X, Extend total
|Eyepiece||SWH10X high eye point & extra wide-field eyepiece ,FOV Φ23mm|
|Interpupillary distance adjustment range(SWH10X)||52mm~76mm|
|Diopter adjustment range||±6 Diopter|
|Focus adjustment range||50mm(Using square post is 100mm)|
|Support and main body matched dimension||Φ76mm|
|Post’ center to Support’ center dimension||140mm|
|Round post diameter||Φ25mm|
|Center stage diameter||Φ95mm|
|Trinocular, Binocular eyetubes||Binocular, Trinocular eyetubes inclined 45°and main body can be
|Illuminators||The down illuminator is transmitted illumination of fluorescent
lamp(5W),the up illuminator is reflected illumination of halogen
|Eyepiece||Item||Main body||Specification of different auxiliary objective|
1. Please use lengthened round post when using 0.37X objective,
track stands cannot be used.
2. When 0.5X or lower magnification objective applied, track stands
cannot be used.
What is Stereo Microscope:
The stereo or stereoscopic is an optical microscope variant
designed for low magnification observation of a sample, typically
using light reflected from the surface of an object rather than
transmitted through it.
The instrument uses two separate optical paths with two objectives
and eyepieces to provide slightly different viewing angles to the
left and right eyes. This arrangement produces a three-dimensional
visualization of the sample being examined.
Stereomicroscopy overlaps macrophotography for recording and
examining solid samples with complex surface topography, where a
three-dimensional view is needed for analyzing the detail.
The stereo microscope is often used to study the surfaces of solid
specimens or to carry out close work such as dissection,
microsurgery, watch-making, circuit board manufacture or
inspection, and fracture surfaces as in fractography and forensic
engineering. They are thus widely used in manufacturing industry
for manufacture, inspection and quality control. Stereo microscopes
are essential tools in entomology.